Handleiding Profile PAC-206 Classic Parlofoon (pagina 1 van 2) (Engels)

566753

Verklein

Vergroot

Pagina terug

1/2

Pagina verder

Profile Intercom EN - 1

PAC-206

We thank you for the purchase of this Profile product.

Note: It is important that you read this manual carefully

before using the product. Then keep this manual in a

safe place.

Technical information Internal unit

 Supply voltage adapter: 230VAC/15VDC 1A

 Working current: 170 mA + 50mA

 Operating temperature: -10°C to 60°C

 Max relative humidity: 85%

 Total dimensions: 265(L) x 94(B) x 45(H) mm

Technical information External unit

 Working current: < 300mA

 Temperature for use: -20°C / +50°C

 Total dimensions: 120 (L) x 41 (B) x 45 (H) mm

Technical requirements for connections

 Use either the cable supplied measuring 10 metres

or own wiring measuring 0.6 - 0.8mm² with a max.

length of 25 metres.

 You need a plug socket that is max. 1.5m from the

internal unit.

 Required wiring without door lock: 3

 Required wiring with door lock: 5

Parts

 Internal unit with receiver

 External unit

 Protective cover for external unit

 Mounting bracket internal unit

 Fixing screws

 Connecting cable 10 m

Safety instructions

 The internal/external unit may never be cleaned

with detergents. Only clean with soap and a damp

cloth.

 The power wiring may never be cut through nor

extended; this renders the guarantee invalid!

 The internal unit may not be placed close to

magnetic fields such as next to a TV or thick power

cables.

 Water may never be poured over the internal and

external unit. The external unit is only splashproof.

Assembly instructions

1. If there is not yet any wiring:

 The position of the internal unit is determined as

follows: the height amounts to approximately 165

cm, and is max. 150 cm from a plug socket where

the adapter will be plugged in. The connecting

cable between the internal unit and external unit

must therefore come out of the wall behind the

 internal unit. Provide a tube so the cable can move

freely. If possible also provide a tube with a

sufficiently large diameter (20-25mm).

 Determine the position of the external unit

outside at the door

. The ideal installation height

is 155 to 165 cm.

 Insert the cable from the external unit to the

internal unit from outside to inside; the cable is

moulded.

 Connect the wiring according to the diagram

below. We again emphasise that the power supply

wiring may not be extended or cut through: this

causes the appliance to work poorly and

invalidates the guarantee.

 Cut off the cables with 2 cores without door lock.

 If a door lock is to be connected, its connection

must be from the outside unit as shown on the

diagram above. The lock may consume no more

than 300 mA and must have a memory function

(the lock remains free until just before the door is

pushed open). The 2 wires are already provided in

a moulded cable (4m)

2. If there is already wiring present (max. 25m):

 The wire diameter must be between 0.6 and 0.8

mm². Only 3 wires have to be connected. The

yellow video connection is not used so does not

have to be connected.

 Shorten the moulded cables to the desired length

and strip the wires approximately 1cm. If an

electrical door lock is used: also strip the 2-core

cable over a length of 1cm.

The door lock is connected from the external unit

with the moulded cable with two wires. The lock

may consume no more than 300 mA and must

have a memory function (the lock remains in a free

position as long as the door is not pushed open).

 Provide a recess behind the external unit in the

wall or door frames, connect the wiring using the

connecting blocks and push this into the recess. If

you cannot do this the wires must be twisted

together and insulated with insulation tape.

Use:

A. Having a normal conversation

1. Ringing on the external unit

2. Take the receiver and speak to the visitor.

Outdoor

unit

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Profile PAC-206 Classic Parlofoon Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Profile PAC-206 Classic Parlofoon

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info