Handleiding Proficare GKH 3118 (pagina 18 van 90) (Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools)

814770

Verklein

Vergroot

Pagina terug

1/90

Pagina verder

PC-GKH3118_IM 01.09.23

Weekly Timer

• To use the weekly timer, you must rst set the current

time. The current time must be set when the appliance

is rst put into operation and every time the appliance is

disconnected from the mains.

• The days of the week are indicated by the following digits

in the display:

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Sunday

Set the Current Time:

1. Select the weekly mode with the button . The display

shows

2. Press the button . The starts ashing.

3. Select the current day of the week with the or but-

ton. Conrm your entry with the button . When the

time is displayed, the hours ( ) start ashing.

4. Set the current hour with the or button. Conrm

your entry with the button . When the time is dis-

played, the minutes ( ) start ashing.

5. Set the current minutes with the button or .

6. Wait until the minutes stop ashing. The settings are

accepted. In the hour bar, the upper and lower bars of

the current hour ash.

Program the Weekly Timer

• The operating modes determine when the appliance is to

operate in which operating mode.

• Each line of the hour bar ( 8

012 16 20 ) represents one hour.

The appliance is activated for the selected full hour.

• The upper bar represents the full power of the appliance,

the lower bar represents half the power. If the bars of

the hour bar are not lit, the appliance is working in the

anti-frost function.

• The appliance must remain switched on in the “Weekly

Timer” operating mode for the function to work. To avoid

being disturbed by the display illumination, it can be

switched off as described above.

• If the appliance is in the activated hour, the set temper-

ature can be displayed or changed with the or

button.

• Make sure that you do not maintain too long between

programming steps. The programming mode is automati-

cally terminated after 5 seconds!

1. If not already done, set the time and temperature as

described on page 17.

- Individual temperatures cannot be set during pro-

gramming. The temperature from the default settings

(page 17) are adopted.

2. Select the weekly timer mode with the button . In the

hour bar, the upper and lower bars of the current hour

ash.

3. Press the button . The current day

of the week starts

ashing in the display.

4. Select the day of the week to be programmed (

–

) with the button .

5. Select the anti-frost function ( ) with the button .

6. Go to the desired start time with the button or .

7. Use the button to select whether the appliance should

operate with full power ( ) or half power ( )

8. Move to the desired stop time with the or button.

The bars become visible accordingly.

9. Wait until the

stops ashing. The settings are ac-

cepted. In the hour bar, the upper and lower bars of the

current hour ash.

- Do you want to set more than one heating period per

day, e. g. heating period 1 from 10 – 12 hrs, heating period

2 from 16 – 18 hrs. Program heating period 1 (points 1 – 8)

as described above. Immediately after point 8, start

again with point 5 to set heating period 2.

Deleting a Weekly Timer Programming

1. Select the weekly timer mode with the button . In the

hour bar, the upper and lower bars of the current hour

ash.

2. Press the button . The current day

of the week

starts ashing in the display.

3. With the button , select the day of the week on which

previously programmed times are to be changed.

4. Select the anti-frost function ( ) with the button .

5. Go forward or backward in time with the button or .

As soon as you reach the programmed time, it is deleted.

Open Window Detection

The appliance causes a temperature check at regular

intervals and switches off if the temperature drops by 5 °C

within 20 minutes.

1. Press the button to switch on the function. The sym-

bol appears in the display.

2. Press the button again to switch the function off. The

symbol goes out.

- You can also activate and deactivate the function on the

appliance. To do this, press and hold the button for

approx. 3 seconds.

Ending Operation

1. Press the button to switch off the appliance.

2. Then pull the mains plug out of the socket.

Restore Factory Settings

Press and hold the and buttons on the appliance for

approx. 3 seconds. An acknowledgement tone sounds and

the appliance switches off. The factory settings are restored.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Proficare GKH 3118 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info