554135
3
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
CAUTION
Read all precautions and instruc
-
tions in this manual before using
this equipment. Keep this manual
for future reference.
M
odel No. PFEVEX61040
Serial No.
Serial Number
Decal
USER’S MANUAL
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you have
questions, or if there are missing
or parts, please call:
Or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
email: csuk@iconeurope.com
08457 089 009
IMPORTANT PRECAUTIONS
TABLE OF CONTENTS
IMPORTANTPRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
HOW TO USE THE RECUMBENTCYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
R
ECUMBENT CYCLE EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
WEIGHT BENCH EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
2
WARNING:To reduce the risk of serious injury, read the following important precau-
tions before using the crosstrainer.
1. Read all instructions in this manual before
using the crosstrainer.
2. It is the responsibility of the owner to ensure
that all users of the crosstrainer are ade-
quately informed of all precautions.
3. Thecrosstrainer is intended for home use
only. Do not use the crosstrainer in a com-
mercial, rental, or institutional setting.
4. Place the crosstrainer on a level surface,
with a mat beneath it to protect the floor or
carpet. Keep the crosstrainer indoors, away
from moisture and dust.
5. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
6. Keep children under age 12 and pets away
from the crosstrainer at all times.
7. The crosstrainer should not be used by per-
sons weighing more than 115 kg (250 lbs.).
8. Wear appropriate exercise clothing when
using the crosstrainer; do not wear clothing
that could become caught on the crosstrain-
er. Always wear shoes for foot protection.
9. Before using the weight bench, always
adjust the seat to the farthest forward posi-
tion. Never sit on the backrest or the head-
rest; doing so could cause the crosstrainer
to tip, resulting in injury.
10.Keep your back straight when using the
crosstrainer;do not arch your back.
11. The crosstrainer includes three pairs of
hand weights. Do not use other weights with
the crosstrainer.
12.When you stop pedalling, allow the pedals to
slowly come to a stop.
13.The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin-
ing heart rate trends in general.
14.If you feel pain or dizziness whilst exercis-
ing, stop immediately and cool down.
WARNING:Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health prob-
lems. Read all instructions before using. ICON assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.
3
BEFORE YOU BEGIN
Congratulations for selecting the new PROFORM
®
764 HR crosstrainer. The unique 764 HR crosstrainer
combines a comfortable recumbent cycle with a con-
venient weight bench to let you enjoy both aerobic
exercise and strength training exercise in the conve-
nience of your home.
For your benefit, read this manual carefully before
you use the crosstrainer. If you have questions after
reading this manual, please call our Customer Service
Department at
08457 089 009. To help us assist you,
please note the product model number and serial
number before calling. The model number is
PFEVEX61040. The serial number can be found on a
decal attached to the crosstrainer (see the front cover
of this manual for the location of the decal).
Before reading further, please familiarise yourself with
the parts that are labelled in the drawing below.
Handgrip Pulse Sensor
Adjustment Knob
Wheel
Pedal/Strap
Console
Water Bottle Holder (no water bottle is included)
Adjustment Pin
Backrest
Decal 1
Decal 2
Handlebar
Seat
Fan
Foot
Adjustment Knob
Hand Weight
CAUTION: The decals shown at the
right are found on the crosstrainer
in the locations indicated above. If
a decal is missing or illegible, call
08457 089 009 and order a free
replacement decal. Apply the decal
in the location shown. Note: The
decals are not
shown actual
size.
Prt # 210124
ATTENTION
Decal 1
Decal 2
4
ASSEMBLY
A
ssembly requires two persons.
P
lace all parts of the crosstrainer in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed. In addition to the included hex
k
eys, assembly requires a phillips screwdriver , an adjustable spanner , and a
rubber mallet .
As you assemble the crosstrainer, use the drawings below to identify the small parts used in assembly. The
number in parentheses below each drawing is the key number of the part, from the PART LIST on page 22. The
second number is the quantity used in assembly.
Note: Some small parts may have been preassembled for
shipping. If a part is not in the parts bag, check to see if it has been preassembled.
M10 x 112mm Carriage Bolt (65)–2
M10 Zinc Nylon
Locknut (66)–2
M10 Black Nylon
Locknut (63)–2
M10 Zinc Split
Washer (93)–2
1/2” Nylon
Locknut (52)–1
M4 x 16mm
Screw (73)–5
M6 Flat
Washer (71)–1
M6 x 25.4mm Button
Screw (79)–1
M6 Nylon
Locknut (45)–4
M6 x 16mm
Screw (64)–5
M6 x 50mm Screw (69)–1
M10 x 45mm Button
Screw (74)–2
M4 x 22mm
Screw (91)–2
M10 x 52mm Zinc Button Bolt (68)–2
1/2” x 70mm Button Bolt (51)–1
M6 x 32mm Button
Screw (83)–4
M10 Zinc
Washer (85)–2
M8 x 12mm Button
Screw (94)–4
5
1. Whilst another person lifts the front of the Frame (1),
attach the Front Stabiliser (2) to the Frame with two
M
10 x 112mm Carriage Bolts (65) and two M10 Black
Nylon Locknuts (63).
Make sure that the Front
S
tabiliser is turned so the Wheels (30) are not
touching the floor.
2
63
30
3
0
6
5
1
1
2. Orient the Frame Rail (3) as shown, with the hexago-
nal holes in the indicated position. Insert the end of the
Frame Rail into the Stabiliser Covers (7, 8) as shown.
Attach the Stabiliser Covers with two M10 x 45mm
Button Screws (74).
3
3
7, 8
7, 8
74
3. Orient the Seat Carriage (4) as shown. Locate the
Knob (not shown) on the Seat Carriage, and turn the
Knob counterclockwise until it is loose. Next, pull the
Knob, slide the Seat Carriage onto the Frame Rail (3),
and then release the Knob. Move the Seat Carriage
back and forth slightly until it locks into position.
Then, tighten the Knob.
Slide the Frame Rail (3) onto the indicated round tubes
on the Frame (1). Attach the Frame Rail with two M10
x 52mm Zinc Button Bolts (68), two M10 Zinc Split
Washers (93), two M10 Zinc Washers (85), and two
M10 Zinc Nylon Locknuts (66).
Set the six Hand W
eights (not shown) on the Stabiliser
Covers (7, 8) as shown on page 3.
4. With the help of a second person, slide the Backrest
Frame (5) onto the top of the Seat Carriage (4). Next,
slide the bracket on the Seat Frame (6) over the
rounded brackets on the Backrest Frame. Align the
indicated holes in the Seat Frame, the Backrest
Frame, and the Seat Carriage, and insert the 1/2” x
70mm Button Bolt (51) into the holes.
Then, tighten the
1/2” Nylon Locknut (52) onto the Bolt.
Pivot the Backrest Frame (5) up until it is nearly vertical.
Insert the Adjustment Pin (29) into the lowest hole in
the rounded brackets on the Backrest Frame and
through the corresponding hole in the Seat Carriage (4).
6
5
51
4
29
4
2
68
85
93
Align
these
holes
52
3
1
66
Knob
Hexagonal
Holes
4
6
6. Attach the Backrest (10) to the Backrest Frame (5)
with two M6 x 16mm Screws (64), an M6 x 50mm
Screw (69), and an M6 Flat Washer (71).
7
35
13
Slot
36
Knob
5. Attach the Seat (12) to the Seat Frame (6) with three
M6 x 16mm Screws (64).
5
6
7. Whilst another person holds the Upright (13) in the
position shown, connect the Upper Wire Harness (35)
to the Lower Wire Harness (36). Carefully pull the
upper end of the Upper Wire Harness to remove
any slack from the Wire Harnesses.
Turn the Knob (not shown) on the right side of the
Frame (1) counterclockwise until it is loose. Next, pull
the Knob, insert the Upright (13) into the Frame, and
then release the Knob.
Move the Upright up and
down slightly until it locks into position. Be careful
to avoid pinching the W
ire Harnesses (35, 36).
Tighten the indicated M6 x 25.4mm Button Screw (79)
into the slot in Upright.
79
12
6
64
64
10
5
71
69
64
1
8. Whilst another person holds the Console (16) in the
position shown, connect the wire harness on the
Console to the Upper W
ire Harness (35). Insert the
excess wire harness into the Upright (13).
Attach the Console (16) to the Upright (13) with four
M4 x 16mm Screws (73).
Be careful to avoid pinch-
ing the wire harnesses.
Attach the Water Bottle Holder (89) to the Upright (13)
with two M4 x 22mm Screws (91).
16
35
73
91
Wire
Harness
8
13
89
7
12.Make sure that all parts of the crosstrainer are properly tightened.Note: Some hardware may be left
over after assembly is completed.
T
o protect the floor or carpet from damage, place a mat under the
crosstrainer.
10.The Console (16) requires four 1.5V “D” batteries;
alkaline batteries are recommended. Remove the indi-
cated screw from the battery drawer. Pull the battery
drawer open and insert four batteries.
Make sure that
the batteries are oriented as shown by the mark-
ings inside of the battery drawer.
Close the battery
drawer and reattach the screw. Note: When the batter-
ies are installed correctly,the fan will turn on for a
moment.
See step 9. Tighten the M6 Nylon Locknuts (45).
11. Identify the Left Pedal (24), which is marked with an
“L.” Using an adjustable wrench, firmly tighten the
Left Pedal
counterclockwise
into the Left Crank Arm
(42). Tighten the Right Pedal (not shown)
clockwise
into the Right Crank Arm (not shown) in the same
way. Important: Tighten both Pedals as firmly as
possible. After using the crosstrainer for one
week, retighten the Pedals. For the best perfor-
mance, the Pedals must be kept properly tightened.
Adjust the Left Pedal Strap (25) to the desired position
and press the end of the Strap onto the tab on the Left
Pedal (24). Adjust the Right Pedal Strap (not shown)
in the same way
.
16
Batteries
Battery
Drawer
10
11
24
Tab
42
25
15
9. Attach the Left Handlebar Bracket (88) to the Upright
(13) with two M6 x 32mm Button Screws (83) and two
M
6 Nylon Locknuts (45). Attach the Right Handlebar
Bracket (95) to the Upright (13) in the same way. Do
n
ot tighten the Nylon Locknuts yet.
Slide the Handlebar Collar (77) onto the Left
Handlebar (11). Insert the Right Handlebar (15) into
the Handlebar Collar. Connect the Handlebar Collar,
the Left Handlebar, and the Right Handlebar with an
M4 x 16mm Screw (73).
Attach the Left Handlebar (11) to the Left Handlebar
Bracket (88) with two M8 x 12mm Button Screws (94).
Attach the Right Handlebar (15) to the Right
Handlebar Bracket (95) in the same way.
9
13
77
73
88
11
45
83
94
95
94
9
4
45
83
Screw
8
HOW TO USE THE RECUMBENT CYCLE
HOW TO ADJUST THE BACKREST
W
hen the recum-
bent cycle is used,
the backrest should
be in the upright
position. To adjust
the backrest, first
pull out the adjust-
ment pin. Raise the
backrest until it is
nearly vertical, and
then insert the
adjustment pin into
the indicated hole
in the rounded
brackets and the
corresponding hole
in the seat carriage.
HOW TO ADJUST THE SEAT
For effective exer-
cise, the seat
should be in the
proper position. As
you pedal, there
should be a slight
bend in your knees
when the pedals
are in the farthest
position. To adjust
the seat, first turn
the indicated
adjustment knob
counterclockwise
two or three turns
to loosen it (if the knob is not loosened enough, it may
scratch the rail). Next, pull the knob, slide the seat car
-
riage to the desired position, and then release the
knob.
Move the seat carriage back and forth slightly
until it locks into position. Then, turn the knob clock
-
wise until it is tight.
HOW TO ADJUST THE UPRIGHT
T
he upright can be
adjusted to the
height that is the
most comfortable for
you. To adjust the
upright, first turn the
indicated adjust-
ment knob counter-
clockwise two or
three turns to
loosen it (if the knob
is not loosened enough, it may scratch the upright).
Next, pull the knob, slide the upright to the desired
height, and then release the knob.
Move the upright
up and down slightly until it locks into position.
Then, turn the knob clockwise until it is tight. IMPOR-
TANT: After you adjust the upright, make sure that
your knees will not touch the handgrip pulse sen-
sor when you pedal.
HOW TO ADJUST THE PEDAL STRAPS
Toadjust the pedal
straps, first pull the
ends of the straps
off the tabs on the
pedals. Adjust the
straps to the
desired positions,
and then press the
ends of the straps
back onto the tabs.
HOW TO USE THE HAND WEIGHTS
The included hand weights can be used for a variety
of strength training exercises with the weight bench
(see page 20). In addition, the hand weights can be
used with the recumbent cycle. As you pedal, press
the hand weights over your head, raise the hand
weights out to your sides until your hands are level
with your shoulders, or do arm curls with the hand
weights.
Strap
Tab
Backrest
Pin
Brackets
Seat
Carriage
Rail
Knob
Upright
Knob
The crosstrainer features a recumbent cycle for aerobic exercise, and a convenient weight bench for strength
training exercise. To use the recumbent cycle, see pages 8 to 19. To use the weight bench, see page 20.
Seat
Carriage
9
FEATURES OF THE CONSOLE
The advanced console offers a selection of features
designed to make your workouts more enjoyable and
effective. When the manual mode of the console is
selected, the resistance of the pedals can be changed
with the touch of a button. As you pedal, the console
will provide continuous exercise feedback. You can
even measure your heart rate using the built-in hand-
grip pulse sensor.
The console also offers six Smart programs. Each pro-
gram automatically changes the resistance of the ped
-
als and prompts you to increase or decrease your pace
as it guides you through an effective workout.
In addition, the console features two Heart Rate pro-
grams that change the resistance of the pedals and
prompt you to vary your pace to keep your heart rate
near a target heart rate as you exercise.
The console also features iFIT.com interactive technol-
ogy. Having iFIT.com technology is like having a per-
sonal trainer in your home. Using an audio cable, you
can connect the crosstrainer to your home stereo,
portable stereo, computer, or VCR and play special
iFIT.com CD and video programs (iFIT.com CDs and
videocassettes are available separately). iFIT.com CD
and video programs automatically control the resis-
tance of the pedals and prompt you to vary your pace
as a personal trainer coaches you through every step
of your workout. High-energy music provides added
motivation. To purchase iFIT.com CDs and video-
cassettes, visit our Web site at
www.iconeurope.com.
W
ith the crosstrainer connected to your computer, you
can also go to our Web site at www.iFIT.com and
access programs directly from the internet. Explore
www.iFIT.com for more information.
To use the manual mode of the console,
see page
10. To use a Smart program, see page 12. To use a
Heart Rate program, see page 13. T
ouse an
iFIT.com CD or video program, see page 17. To use
a program directly from our Web site, see page 18.
Display Buttons
F
an Button
On/Reset Button
Resistance Buttons
10
Turn on the console.
Note: The console requires four 1.5V “D” batter-
ies (see assembly step 10 on page 7).
To turn on the console, press the On/Reset but-
ton or begin pedalling. (See the drawing on page
9 to identify the On/Reset button.)
Select the manual mode.
Each time the console is
turned on, the manual
mode will be selected. If a
program has been select-
ed, select the manual
mode by pressing the
Program button repeatedly
until the letters RPM
appear in the small display.
Begin pedalling and change the resistance of
the pedals as desired.
As you pedal, change the resistance of the ped-
als by pressing the + and – buttons below the
large display.There are ten resistance levels—
level 10 is the most challenging. Note: After the
buttons are pressed, it will take a few seconds for
the resistance to reach the selected setting.
Follow your progress with small display and
the large display.
The small display will
show your pedalling pace,
in revolutions per minute
(RPM).
The indicator bar in
the small display will
increase or decrease in
length as you increase or
decrease your pedalling
pace.
The upper sec-
tion of the large
display will show
the distance you
have pedalled
and the numbers
of
calories
and
fat calories
you have burned (see
FATBURNING on page 19 for an explanation of
fat calories).
The display will change from one
number to the next every few seconds. If you use
the handgrip pulse sensor, the display will also
s
how your heart rate (see step 5 on page 11).
T
o view only the distance
you have pedalled or the
number of calories or fat
calories you have burned,
press the upper button on
the left side of the large
display until only the word
DISTANCE, CALORIES, or
FATCALORIES appears in the upper section of
the large display. Make sure that the word SCAN
does not appear. To again view the distance you
have pedalled and the numbers of calories and
fat calories you have burned, press the upper
button until the word SCAN reappears.
The centre of
the large display
will show the
elapsed time and
your current pace
(pace is shown in
minutes per mile). The display will change from
one number to the other every few seconds.
Note: When a program is selected (except for the
Self Select program), the display will show the
time
remaining
in the program instead of the
elapsed time.
To view only the elapsed time or your pace, press
the centre button on the left side of the large dis-
play until only the word TIME or PACE appears.
Make sure that the word SCAN does not appear.
To view both the elapsed time and your pace,
press the centre button until the word SCAN
reappears.
The lower sec-
tion of the large
display
will show
your pedalling
speed and the
resistance level.
The display will change from one number to the
other every few seconds.
T
o view only your pedalling speed or the resis
-
tance level, press the lower button on the left
side of the large display until only the word
SPEED or RESISTANCE appears. Make sure
that the word SCAN does not appear
.
T
o view
both your pedalling speed and the resistance
level, press the lower button until the word SCAN
reappears.
4
3
2
1
H
OW TO USE THE MANUALMODE
Indicator Bar
Upper Button
11
To reset the displays, press the On/Reset button.
N
ote: The con-
sole can show
s
peed and dis-
tance in either
miles or kilome-
tres.
The letters
MPH or KM/H will appear in the lower section of
the large display to show which system of mea-
surement is selected. To change the system of
measurement, hold down the On/Reset button for
about six seconds. Note: When the button is held
down, the fan will turn on for a moment. When
the batteries are replaced, it may be necessary to
reselect the desired system of measurement.
Measure your heart rate if desired.
If there are thin
sheets of plas-
tic on the
metal contacts
on the hand-
grips, peel off
the plastic.
To
use the hand-
grip pulse sen-
sor, hold the handgrips with your palms resting
against the metal contacts. Avoid moving your
hands.When your pulse is detected, the heart-
shaped indicator in the large display will flash
each time your heart beats. After a moment, two
dashes (– –) will appear and then your heart rate
will be shown.
For the most accurate heart rate reading, contin-
ue to hold the handgrips for about 30 seconds.
N
ote: When you first hold the handgrips, the
large display will show your heart rate continu-
o
usly for 30 seconds. The display will then show
your heart rate along with other feedback modes.
Turn on the fan if desired.
To turn on the
fan at low speed,
press the fan
button. To turn
on the fan at
high speed,
press the fan
button a second
time. To turn off
the fan, press the fan button a third time. Note: If
the fan is turned on but the pedals are not moved
for thirty seconds, the fan will automatically turn
off to conserve the batteries.
Rotate the thumb wheel on the right side of the
console to pivot the fan to the desired angle.
When you are finished exercising, the console
will automatically turn off.
If the pedals are not moved for a few seconds,
the displays will pause and the time will flash in
the large display.
If the pedals are not moved and the console but-
tons are not pressed for a few minutes, the con-
sole will turn off to conserve the batteries.
7
6
5
Thumb
Wheel
Fan
Button
Metal
Contacts
12
Each Smart program will automatically change the
resistance of the pedals and prompt you to increase or
decrease your pace as it guides you through an effec-
tive workout. Programs 3 and 4 are weight loss pro-
grams, programs 5 and 6 are aerobic programs, and
programs 7 and 8 are high-performance programs.
Follow the steps below to use a Smart program.
Turn on the console.
See step 1 on page 10.
Select one of the Smart programs.
Each time the console is
turned on, the manual
mode will be selected. To
select a Smart program,
press the Programbutton
repeatedly until the number
3, 4, 5, 6, 7, or 8 appears
in the small display.
Begin pedalling to start the program.
Tostart the program, simply begin pedalling. Each
Smart program consists of 20 or 30 one-minute
periods. One resistance level and one target pace
are programmed for each period. (The same
resistance level and/or target pace may be pro-
grammed for two or more consecutive periods.)
At the end of each period of the program, the
resistance of the pedals will automatically change
if a different resistance level is programmed for
the next period. Note: If the resistance level is too
high or too low
, you can change it by pressing the
+ and – buttons below the large display
. However,
when the current period is completed, the resis-
tance of the pedals will automatically change if a
different resistance level is programmed for the
next period.
The target pace
for the current
p
eriod will be
shown by the
a
rrows in the
small display. To
pedal at the target
pace, simply
increase or decrease your pace until there is one
arrow pointing to each segment of the indicator
bar (see the drawing above). At the end of each
period, the number of arrows will change if a dif-
ferent target pace is programmed for the next
period. When the number of arrows changes,
change your pace until there is one arrow pointing
to each segment of the indicator bar.
Important:
The target pace is intended only to provide a
goal. Your actual pace may be slower than the
target pace, especially during the first few
months of your exercise program. Make sure
to pedal at a pace that is comfortable for you.
During the program, the centre of the large dis-
play will show the time remaining in the program.
If you stop pedalling for a few seconds, the dis-
plays will pause and the time will flash. If you con-
tinue pedalling after the program is completed, the
displays will continue to show exercise feedback.
Follow your progress with the large display.
See step 4 on page 10.
Measure your heart rate if desired.
See step 5 on page 11.
Turn on the fan if desired.
See step 6 on page 1
1.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 11.
7
6
5
4
3
2
1
H
OW TO USE ASMART PROGRAM
Arrows
I
ndicator
B
ar
13
Heart Rate program 1 is designed to keep your heart
rate between 65% and 85% of your
maximum heart
rate
during your workout. (Your maximum heart rate is
estimated by subtracting your age from 220. For
example, if you are 25 years old, your maximum heart
rate is 195 beats per minute.) Heart Rate program 2 is
designed to keep your heart rate near a target heart
rate that you select.
Follow the steps below to use a Heart Rate program.
Turn on the console.
See step 1 on page 10.
Select one of the Heart Rate programs.
Each time the console is
turned on, the manual
mode will be selected. To
select a Heart Rate pro-
gram, press the Program
button repeatedly until the
number 1 or 2 appears in
the small display.
Enter your age or a target heart rate.
If program 1 is selected, the word AGE will
appear in the large display and the current age
setting will flash. If you have already entered your
age, press the Enter button. If you have not
entered your age, press the small + and – buttons
to enter your age, and then press the Enter but-
ton. Once you have entered your age, it will be
saved in memory until the batteries are replaced.
If program 2 is selected, the letters PLS (pulse)
will appear in the large display and the current tar
-
get heart rate will flash. If you do not wish to
change the target heart rate, press the Enter but
-
ton. If you wish to change the target heart rate,
press the small + and – buttons.
Then, press the
Enter button.
The target heart rate can be from 70
to 170 beats per minute.
Hold the handgrip pulse sensor.
It is not necessary to hold the handgrips continu-
ously during a Heart Rate program; however
, you
must hold the handgrips frequently for the pro
-
gram to operate properly.
Each time you hold
the handgrips, keep your hands on the metal
c
ontacts for at least 30 seconds. N
ote: When
you are not holding the handgrips, the letters PLS
w
ill appear in the large display instead of your
heart rate.
Begin pedalling to start the program.
To start the program, simply begin pedalling.
Program 1 consists of 20 one-minute periods.
One resistance level and one target heart rate are
programmed for each period. (The same resis-
tance level and/or target heart rate may be pro-
grammed for two or more consecutive periods.)
Program 2 is sixty minutes long (you may choose
to use only part of the program). The same resis-
tance level and target heart rate are programmed
for the entire program.
If program 1 is selected, the resistance of the
pedals will periodically change. (Note: If the resis-
tance level is too high or too low, you can change
it by pressing the + and – buttons below the large
display. However, when the current period is com-
pleted, the resistance of the pedals may automati-
cally change.)
If program 2 is selected, the
resistance of the pedals will not change. Note:
You can change the resistance level for the entire
program by pressing the + and – buttons below
the large display if desired.
During programs
1 and 2, the
arrows in the
small display will
help you to keep
your heart rate
near the current
target heart rate.
When you hold the handgrip pulse sensor, the
console will compare your heart rate to the cur-
rent target heart rate. If your heart rate is too far
above or below the target heart rate, the number
of arrows in the small display will change to
prompt you to increase or decrease your pace.
When the number of arrows changes, change
your pace until there is one arrow pointing to each
segment of the indicator bar. Important: The tar-
get pace is intended only to provide a goal.
Your actual pace may be slower than the tar-
get pace, especially during the first few
months of your exercise program. Make sure
to pedal at a pace that is comfortable for you.
5
4
3
2
1
H
OW TO USE AHEART RATE PROGRAM
Arrows
Indicator
Bar
14
Note: If you stop pedalling for a few seconds, the
program will end. To use the program again, rese-
l
ect it and start it at the beginning.
Follow your progress with the large display.
See step 4 on page 10.
Turn on the fan if desired.
See step 6 on page 11.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 11.
To use iFIT.com CDs,the crosstrainer must be connect-
ed to your portable CD player, portable stereo, home
stereo, or computer with CD player. See pages 14 to 16
f
or connecting instructions.
T
ouse iFIT.com videocas-
settes,the crosstrainer must be connected to your VCR.
See page 16 for connecting instructions. To use
iFIT.com programs directly from our Web site,the
crosstrainer must be connected to your computer. See
page 16.
HOW TO CONNECT YOUR PORTABLE CD PLAYER
Note: If your CD player has separate LINE OUT and
PHONES jacks, see instruction A below. If your CD
player has only one jack, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the LINE OUT jack on your CD
player. Plug your headphones into the PHONES
jack.
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the splitter. Plug the splitter into the
PHONES jack on your CD player. Plug your head-
phones into the other side of the splitter
.
8
7
6
H
OW TO CONNECT YOUR CD PLAYER, VCR,
OR COMPUTER
A
LINE OUT
P
HONES
LINE OUT
PHONES
B
PHONES
PHONES
Audio
Cable
Head-
phones
A
A
LINE OUT
PHONES
L
INE OUT
PHONES
B
PHONES
PHONES
Audio
Cable
Splitter
Headphones
B
15
HOW TO CONNECT YOUR PORTABLE STEREO
N
ote: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
3
.5mm LINE OUT jack, see instruction B. If your
stereo has only a PHONES jack, see instruction C.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the Adaptor. Plug the Adaptor into
an AUDIO OUT jack on your stereo.
B.See the drawing above. Plug one end of the audio
cable into the jack beneath the console. Plug the
other end of the audio cable into the LINE OUT
jack on your stereo. Do not use the adaptor.
C. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the splitter. Plug the splitter into the
PHONES jack on your stereo. Plug your head-
phones into the other side of the splitter.
HOW TO CONNECT YOUR HOME STEREO
N
ote: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
b
eing used, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the Adaptor. Plug the Adaptor into
the LINE OUT jack on your stereo.
B.Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the Adaptor. Plug the Adaptor into
an RCAY-Adaptor (available at electronics stores).
Next, remove the wire that is currently plugged into
the LINE OUT jack on your stereo and plug the
wire into the unused side of the Y-Adaptor. Plug the
Y-Adaptor into the LINE OUT jack on your stereo.
B
A
CD
VCR
Amp
LINE OUT
LINE OUT
CD
VCR
Amp
LINE OUT
Audio
Cable
A
B
A
CD
VCR
Amp
L
INE OUT
LINE OUT
CD
VCR
Amp
LINE OUT
Audio Cable
RCAY-adaptor
Adaptor
Wire removed from
LINE OUT jack
B
Adaptor
A
C
PHONES
LINE OUT
AUDIO OUT
RIGHT
LEFT
B
Audio
Cable
Adaptor
A/B
A
C
PHONES
L
INE OUT
A
UDIO OUT
RIGHT
LEFT
B
Audio
Cable
C
Splitter
Headphones
16
HOW TO CONNECT YOUR COMPUTER
N
ote: If your computer has a 3.5mm LINE OUT
jack, see instruction A. If your computer has only a
P
HONES jack, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the LINE OUT jack on your com-
puter.
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the splitter. Plug the splitter into the
PHONES jack on your computer. Plug your head-
phones or speakers into the other side of the splitter.
HOW TO CONNECT YOUR VCR
N
ote: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
b
eing used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 15.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the Adaptor. Plug the Adaptor into
the AUDIO OUT jack on your VCR.
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the Adaptor. Plug the Adaptor into
an RCAY-adaptor (available at electronics stores).
Next, remove the wire that is currently plugged into
the AUDIO OUT jack on your VCR and plug the
wire into the unused side of the Y-adaptor. Plug the
Y-adaptor into the AUDIO OUT jack on your VCR.
B
VIDEO AUDIO
ANT. IN
RF OUT
IN
O
UT
CH
3
4
A
AUDIO OUT
R
IGHT
LEFT
V
IDEO AUDIO
ANT. IN
R
F OUT
I
N
OUT
C
H
34
C
AUDIO OUT
RIGHT
LEFT
Audio Cable
Adaptor
A
B
V
IDEO AUDIO
A
NT. IN
R
F OUT
IN
O
UT
CH
3
4
A
AUDIO OUT
RIGHT
LEFT
V
IDEO AUDIO
ANT. IN
RF OUT
IN
O
UT
C
H
3
4
AUDIO OUT
RIGHT
L
Audio Cable
Adaptor
B
Wire removed from
AUDIO OUT jack
RCA
Y-adaptor
A
PHONES
LINE OUT
B
Audio
Cable
A
A
PHONES
LINE OUT
B
Audio
Cable
B
Splitter
Headphones/Speakers
17
To use iFIT.com CDs or videocassettes, the crosstrain-
er must be connected to your portable CD player,
p
ortable stereo, home stereo, computer with CD play-
e
r, or VCR. See HOW TO CONNECTYOUR CD
PLAYER, VCR, OR COMPUTER on page 14.
To pur-
chase iFIT.com CDs and videocassettes, visit our
Web site at www.iconeurope.com.
Follow the steps below to use an iFIT.com CD or
video program.
Turn on the console.
See step 1 on page 10.
Select the iFIT.com mode.
Each time the console is
turned on, the manual
mode will be selected. To
select the iFIT.com mode,
press the iFIT.com button.
The indicator near the but-
ton will light and the letters
IF will appear in the small
display.
Insert the iFIT.com CD or videocassette.
If you are using an iFIT.com CD, insert the CD
into your CD player. If you are using an iFIT.com
videocassette, insert the videocassette into your
VCR.
Press the play button on your CD player or
VCR.
Amoment after the play button is pressed, your
personal trainer will begin guiding you through
your workout. Simply follow your personal train-
er’s instructions.
The program will function in almost the same way
a
s a Smart program (see step 3 on page 12).
However, an electronic “chirping” sound will alert
y
ou when the resistance level and/or the target
pace is about to change.
Note: If the resistance of the pedals and/or the
t
arget pace does not change when a “chirp” is
h
eard:
Make sure that the indicator near the
iFIT.com button is lit.
Adjust the volume of your CD player or VCR.
If the volume is too high or too low, the con-
sole may not detect the program signals.
• Make sure that the audio cable is properly
connected and that it is fully plugged in.
Follow your progress with the large display.
See step 4 on page 10.
Measure your heart rate if desired.
See step 5 on page 11.
Turn on the fan if desired.
See step 6 on page 11.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 11.
8
7
6
5
4
3
2
1
HOW TO USE IFIT.COM CD AND VIDEO
PROGRAMS
18
Our Web site at www.iFIT.com allows you to play
i
FIT.com programs directly from the internet. To use
programs from our Web site, the crosstrainer must be
connected to your computer. See HOW TO CON-
NECTYOUR COMPUTER on page 16. In addition,
you must have an internet connection and an internet
service provider. Alist of specific system requirements
is found on our Web site.
Follow the steps below to use a program from our
Web site.
Turn on the console.
See step 1 on page 10.
Select the iFIT.com mode.
Each time the console is
turned on, the manual
mode will be selected. To
select the iFIT.com mode,
press the iFIT.com button.
The indicator near the but-
ton will light and the letters
IF will appear in the small
display.
Go to your computer and start an internet
connection.
Start your Web browser, if necessary, and go
to our Web site at www.iFIT.com.
Follow the desired links on our Web site to
select a program.
F
ollow the on-line instructions to start the
p
rogram.
When you start the program, an on-screen count-
down will begin.
Return to the crosstrainer and begin
pedalling.
When the on-screen countdown ends, the pro-
gram will begin. The program will function in
almost the same way as a Smart program (see
step 3 on page 12). However
, an electronic “chirp-
ing” sound will alert you when the resistance level
and/or the target pace is about to change.
Follow your progress with the large display.
See step 4 on page 10.
Measure your heart rate if desired.
See step 5 on page 11.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 11.
10
9
8
7
6
5
4
3
2
1
HOW TO USE PROGRAMS DIRECTLY FROM
OUR WEB SITE
19
RECUMBENT CYCLE EXERCISE GUIDELINES
The following guidelines will help you to plan your
workouts using the recumbent cycle. Remember that
proper nutrition and adequate rest are essential for
successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning, maximum fat
burning, and cardiovascular (aerobic) exercise.
To find the proper heart rate for you, first find your age
at the bottom of the chart (ages are rounded off to the
nearest ten years). Next, find the three numbers above
your age. The three numbers are your “training zone.”
The lower two numbers are recommended heart rates
for fat burning; the highest number is the recommend-
ed heart rate for aerobic exercise.
Fat Burning
To burn fat effectively, you must exercise at a relative-
ly low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible
carbohydrate
calories for ener-
gy. Only after the first few minutes of exercise does
your body begin to use stored
fat
calories for energy.
If your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is near the lowest num-
ber in your training zone as you exercise. For maxi-
m
um fat burning, adjust the intensity of your exercise
until your heart rate is near the middle number in your
training zone as you exercise.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be “aerobic.” Aerobic exer-
cise is activity that requires large amounts of oxygen
for prolonged periods of time. This increases the
demand on the heart to pump blood to the muscles,
and on the lungs to oxygenate the blood. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone as you exercise.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. Aproper warm-up increases your
body temperature, heart rate, and circulation in prepa-
ration for exercise.
Training zone exercise, consisting of 20 to 30 min-
utes of exercising with your heart rate in your training
zone. (During the first few weeks of your exercise
program, do not keep your heart rate in your training
zone for longer than 20 minutes.)
A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three
workouts on the recumbent cycle each week. After a
few months of regular exercise, you may complete up
to five workouts each week if desired. Note: You may
wish to use the recumbent cycle and the weight
bench on alternating days. For example, plan aerobic
workouts on Monday
, Wednesday, and Friday, and
plan weight training workouts on Tuesday, Thursday,
and Saturday. Make sure to rest for at least one full
day each week to give your body time to regenerate.
CAUTION
:It is very important to avoid overdoing
it during the first few months of your exercise pro
-
gram, and to progress at your own pace.
WARNING:
Before beginning this or any exercise pro-
g
ram, consult your physician. This is espe-
cially important for persons over the age of 35
or persons with pre-existing health problems.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin-
ing heart rate trends in general.
20
WEIGHT BENCH EXERCISE GUIDELINES
HOW TO ADJUST THE BACKREST
The backrest can be adjusted to any of four positions:
the inclined (upright) position, the semi-inclined posi-
tion, the flat position, and the declined position.
To adjust the backrest, first adjust the seat to the
farthest forward position
(see HOW TO ADJUST
THE SEATon page 8). Next, pull out the adjustment
pin. Pivot the backrest to the desired position, and
then insert the pin into one of the holes in the rounded
brackets and the corresponding hole in the seat car-
riage (see the inset drawing). Note:When the backrest
is in the declined position, the seat will also be declined.
CAUTION: Never sit on the backrest; doing so
could cause the crosstrainer to tip, resulting in
injury.
STRENGTH TRAINING GUIDELINES
The weight bench can be used for a variety of exercis-
es designed to trim, tone, and strengthen the body.
Please read these guidelines before using the weight
bench.
It is recommended that your strength training program
include 3 workouts each week. Note:
You may wish to
use the weight bench and the recumbent cycle on
alternating days. For example, plan weight training
workouts on Tuesday, Thursday, and Saturday, and
p
lan aerobic workouts on Monday, Wednesday, and
Friday. Make sure to rest for at least one full day each
week to give your body time to regenerate. CAUTION:
It is very important to avoid overdoing it during the
first few months of your exercise program, and to
progress at your own pace.
Begin each workout with five to eight minutes of
stretching and light exercise to warm up. Aproper
warm-up increases your body temperature, heart rate,
and circulation in preparation for exercise.
After warming up, perform a selection of weight train-
ing exercises. The chart on the backrest shows four
exercises that can be performed. Consult a reputable
book to find other exercises that can be performed
using hand weights and a weight bench. To give bal-
ance to your workouts, vary the exercises from work-
out to workout. Begin with 1 set of 12 repetitions for
each exercise. (A“repetition” is one complete cycle of
an exercise, such as one sit-up. A“set” is a series of
repetitions performed without a pause.) As your fitness
level increases, perform 2 or 3 sets for each exercise.
Always rest for at least 1 minute after each set. When
you can complete 3 sets of 12 repetitions without diffi-
culty, you may choose to use heavier weights.
CAUTION: The crosstrainer includes three pairs of
hand weights. Do not use other weights with the
crosstrainer.
Finish each workout with five to eight minutes of
stretching to cool down. This will increase your flexibility
and will help to prevent soreness.
EXERCISE FORM
For the best results, correct form is important.
Maintaining proper form means moving through the full
range of motion for each exercise, and moving only
the appropriate parts of the body. Make sure to per-
form each exercise with a smooth, steady motion.
Exhale as you exert yourself, and inhale as you return
to the starting position; never hold your breath.
STA
YING MOTIV
A
TED
For motivation, try listening to music or watching tele
-
vision whilst you exercise. Use a calendar to keep a
record of your workouts, and record key body mea
-
surements at the end of every month. Remember, the
key to lasting results is to make exercise a regular and
enjoyable part of your daily life.
WARNING:Before beginning any
exercise program, consult your physician.
This is especially important for persons over
the age of 35 or persons with pre-existing
health problems.
Backrest
Seat
Decline
Flat
Semi-inclined
Brackets
Inclined
Pin
21
Inspect and tighten all parts of the crosstrainer regu-
larly. Replace any worn parts immediately.
To clean the crosstrainer, use a damp cloth and a
small amount of mild soap. Important: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
BATTERY REPLACEMENT
If the console display becomes dim, the batteries
should be replaced; most console problems are the
result of low batteries. See assembly step 10 on page
7 for replacement instructions. Note: The console
requires four 1.5V “D” batteries.
HOW TO LEVELTHE CROSSTRAINER
After the
crosstrainer has
been moved to
the location
where it will be
used, make sure
that both ends of
front stabiliser
are touching the
floor. If the
crosstrainer
rocks slightly during use, turn one or both of the feet
under the front stabiliser until the rocking motion is
eliminated.
HANDGRIP PULSE SENSOR TROUBLESHOOTING
Avoid moving your hands whilst using the handgrip
pulse sensor. Excessive movement may interfere
with heart rate readings.
Do not hold the metal contacts too tightly; doing so
may interfere with heart rate readings.
For the most accurate heart rate reading, hold the
metal contacts for about 15 seconds.
For optimal performance of the handgrip pulse sen-
sor, keep the metal contacts clean. The contacts
can be cleaned with a soft cloth—
never use alco-
hol, abrasives, or chemicals.
HOW TO MOVE THE CROSSTRAINER
Before moving the crosstrainer, remove the hand
weights and adjust the seat to the position shown in
the drawing below. Then, stand behind the crosstrain-
er, hold the rail in the indicated location, and lift the
rail until the crosstrainer can be moved on the front
wheels. Carefully move the crosstrainer to the desired
location and then lower it.
CAUTION:To decrease
the possibility of injury,bend your legs and keep
your back straight as you lift the rail and move the
crosstrainer; make sure to lift with your legs
rather than your back.
MAINTENANCE AND TROUBLESHOOTING
Wheel
Lift
Here
Foot
22
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
1 1 Frame
2 1 Front Stabiliser
3 1 Frame Rail
4
1 Seat Carriage
5 1 Backrest Frame
6 1 Seat Frame
7 1 Rear Stabiliser Cover
8 1 Front Stabiliser Cover
9 1 Rear Stabiliser
10 1 Backrest
11 1 Left Handlebar
12 1 Seat
13 1 Upright
14 1 Upright Bushing
15 1 Right Handlebar
16 1 Console
17 1 Left Side Shield
18 1 Right Side Shield
19 1 Side Shield Cover
20 2 Seat Carriage Bushing
21 2 Small Hand Weight
22 2 Medium Hand Weight
23 2 Large Hand Weight
24 1 Left Pedal
25 1 Left Pedal Strap
26 1 Right Pedal
27 1 Right Pedal Strap
28 2 Adjustment Knob
29 1 Adjustment Pin
30 2 Wheel
31 1 Left Front Endcap
32 1 Right Front Endcap
33 2 Foot
34 1 Adjustment Motor
35
1
Upper W
ire Harness
36 1 Lower Wire Harness
37 1 Flywheel
38
1
Magnet
39 2 Snap Ring
40 4 M6 x 13mm Button Screw
41
1 “C” Magnet
42 1 Left Crank Arm
43 1 Reed Switch/Wire
44 2 Crank Bearing
45
4
M6 Nylon Locknut
46 1 Adjustment Cable
47 1 Return Spring
48 2 Bushing Bracket
49 2 Seat Bushing
50 1 Backrest Frame Endcap
51 1 1/2” x 70mm Button Bolt
52 1 1/2” Nylon Locknut
53 1 Belt
5
4 1 Pulley/Crank
55 1 M6 x 38mm Bolt
56 2 Flange Screw
57 1 Right Crank Arm
58 1 8.5mm Spacer
59 1 7.5mm Spacer
60 2 M6 Nut
61 1 M8 Nylon Locknut
62 1 Flywheel Washer
63 2 M10 Black Nylon Locknut
64 5 M6 x 16mm Screw
65 2 M10 x 112mm Carriage Bolt
66 2 M10 Zinc Nylon Locknut
67 1 Small Pulley
68 2 M10 x 52mm Zinc Button Bolt
69 1 M6 x 50mm Screw
70 8 M5 x 7mm Screw
71 1 M6 Flat Washer
72 5 M4 x 25mm Screw
73 11 M4 x 16mm Screw
74 2 M10 x 45mm Button Screw
75 4 M4 x 38mm Round Head Screw
76 2 Handlebar Endcap
77 1 Handlebar Collar
78 2 M5 Nut
79 1 M6 x 25.4mm Button Screw
80 2 M6 x 72mm Button Screw
81 4 M4 x 16mm Flange Screw
82 1 Reed Switch Clamp
83 4 M6 x 32mm Button Screw
84 2 M4 x 12mm Round Head Screw
85
2
M10 Zinc W
asher
86 2 Foam Grip
87 1 Idler
88
1
Left Handlebar Bracket
89 1 Water Bottle Holder
90 2 Handlebar Foam
91
2 M4 x 22mm Screw
92 2 M4 x 8mm Screw
93 2 M10 Zinc Split Washer
94 4 M8 x 12mm Button Screw
95
1
Right Handlebar Bracket
96 1 Idler Bracket
97 1 M8 x 35mm Button Screw
98
1 M6 x 8mm Button Screw
# 1 User’s Manual
# 3 Hex Key
Key No. Qty. Description Key No. Qty. Description
PART LIST—Model No. PFEVEX61040 R1004A
EXPLODED DRAWING—Model No. PFEVEX61040 R1004A
23
Part No. 212026 R1004A Printed in China © 2004 ICON IP, Inc.
ORDERING REPLACEMENT PARTS
To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4, Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
Tel:
Outside the UK: 0 (044) 113 387 7133
Fax: 0 (044) 113 387 7125
To help us assist you, please be prepared to give the following information:
the MODELNUMBER of the product (PFEVEX61040)
the NAME of the product (PROFORM 764 HR crosstrainer)
the SERIALNUMBER of the product (see the front cover of this manual)
the KEY NUMBER and DESCRIPTION of the part(s) (see page 22)
08457 089 009
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pro-form 764HR - PFEVEX6104 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pro-form 764HR - PFEVEX6104 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Pro-form 764HR - PFEVEX6104

Pro-form 764HR - PFEVEX6104 Gebruiksaanwijzing - Nederlands - 24 pagina's

Pro-form 764HR - PFEVEX6104 Gebruiksaanwijzing - Deutsch - 24 pagina's

Pro-form 764HR - PFEVEX6104 Gebruiksaanwijzing - Français - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info