722046
3
Verklein
Vergroot
Pagina terug
1/58
Pagina verder
www.pro-user.com
DIGITAL WIRELESS SOLAR
BACK-UP CAMERA SYSTEM
WITH 10,9CM / 4.3” MONITOR
DIGITALES KABELLOSES SOLAR
RÜCKFAHR-KAMERA-SYSTEM
MIT 10,9CM / 4,3MONITOR
DIGITALE DRAADLOOS SOLAR CAMERASYSTEEM
MET 10,9CM / 4,3” MONITOR
SYSTÈME DE CAMERA DE RECUL SOLAIRE
SANS FIL NUMERIQUE
AVEC ÉCRAN 10,9CM / 4,3
DRC4310Solar
DIGITAL WIRELESS
SOLAR-POWERED
BACK-UP CAMERA SYSTEM
OPERATING MANUAL p.03
BEDIENUNGSANLEITUNG p.15
GEBRUIKSAANWIJZING p.29
MODE D'EMPLOI p.42
2
3
The Pro-User DRC4310Solar is a member of the family of advanced car back-up camera systems
manufactured by Pro User.
The Pro-User DRC4310Solar Digital Wireless Back-up Camera System will improve your ability to see
behind your car, camper, trailer, or mini-van. The Pro-User DRC4310Solar can be operated at a high
voltage range (10-30V) and can therefore be used with 12V and 24V electrical systems. The built-in
LiPo battery of the camera-unit can be charged via USB and also charges itself with sunlight with the
help of the integrated solar-cells. The solar camera-unit can be easily installed without any modifications
at the car´s electrical system.
We have taken numerous measures in quality control to ensure that your product arrives in top condition,
and will perform to your satisfaction.
Please carefully read and follow the following safety and operating instructions.
CAUTION: Please read this instruction manual carefully before installing and starting
up the device. Do not operate the device unless you have fully read and understood
all the provided information. If you are not confident working with 12V/24V DC
voltage or are unsure of what you are doing, consider to seek for help by a
professional installation service or your vehicle´s manufacturer. Failure to observe
these instructions may cause an electrical shock, fatal or serious injury, material
damage or impair the function of the device.
Pro-User accepts no liability for direct or indirect damage caused by faulty assembly or connection, a
usage of damaged or altered products, a usage for purposes other than described and especially caused
by failure to follow these instructions.
General:
Electrical devices are not toys. Keep the product away from children.
Only use the product as intended and for purposes described in the manual.
After opening the package, examine all parts for visible damage. If you have found any damage,
please contact the company you purchased this unit from.
Always disconnect the battery when working on electrical system of your vehicle.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they are supervised or have been
instructed on how to use the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Installing the device, maintenance and repair work may only be carried out by qualified personnel
who are familiar with the risks involved, the relevant regulations and with the guidelines and safety
precautions to be applied.
Do not disassemble the device. Attempting to repair or modify the unit yourself may result in electric
shock or fire and will void the unit warranty.
Always keep metal objects or other materials that can short circuit the terminals of the battery
securely away. A resulting spark or short-circuit may not only damage the device, but also cause an
explosion and potentially produce a current high enough to weld a ring or the like to metal. Remove
personal metal items such as rings, bracelets, necklaces, and watches when working on the device or
the battery.
INTRODUCTION
IMPORTANT SAFETY INSTRUCTIONS
4
Working with Batteries
Batteries can store large amounts of energy and improper handling can be dangerous
Keep children away from batteries and acid.
Avoid getting electrolyte on your skin or clothes. It is acidic and can cause burns. If battery acid
contacts skin or clothing, wash immediately with water. Baking soda neutralizes lead acid battery
electrolyte. If electrolyte gets into your eyes, immediately flood your eyes with running cold water
for at least 20 minutes and get medical attention immediately. Eye protection is therefore
recommended.
Always keep metal objects or other materials that can short circuit the terminals of the battery
securely away.
Power-off the device before making or breaking the connections to the battery.
Observe technical instructions of the seller or the manufacturer of your battery
Check if all connections are tight and clean. Loose or dirty connections could result in overheating,
electrical sparks and fire. Use terminal grease where required.
Never smoke or allow a spark or flame in vicinity of the battery.
Never try to charge a damaged or frozen battery.
Read your car´s owner's manual. Some vehicle manufacturers may have special requirements before
disconnecting the vehicle´s battery (e.g. fuses that have to be removed or certain security demands).
Electrical Cables
If cables have to be fed through metal holes or other walls with sharp edges, use ducts or cable
bushings to prevent damage.
Do not lay cables which are loose or bent next to electrically conductive material (metal).
Do not pull on the cables.
Interference
This device is free from interferences coming from Bluetooth, cell phones, Wi-Fi routers, power lines and
other various electrical equipment.
Caution: Risk of Explosion.
Do not replace any internal batteries. There is a risk of explosion especially if a
battery is replaced by an incorrect type.
Intended use
The Pro-User Digital Wireless Solar Back-up Camera System is intended to be used as a back-up camera
to improve the ability to see behind a car, camper, trailer, or mini-van.
Maintenance
The unit itself is maintenance-free. From time to time, make sure all cable connections are clean and
tight. If necessary, clean the unit with care, using a dry cloth. Don’t try to open the body casing. There
are no user-serviceable parts inside. Damage due to improper use, modifications or attempted repairs
lead to the exclusion of liability and the loss of warranty. If the unit is damaged, the appliance must be
discarded. Cleaning and user maintenance shall not be made by children.
Packaging materials
To avoid danger of suffocation, do not let children play with foils or other packaging materials. Remove
all protective coverings before putting the device in operation.
Storage
When not in use at the car, store the device in a dry environment. Store the device in a safe place out of
the reach of children. Protect the unit from direct sunlight, heat and moisture. Turn off the camera unit
(switch 8 on the backside of the camera unit), in order to not deep-discharge the battery.
GENERAL INSTRUCTIONS
5
1. Monitor with suction cup 2. Camera with mounting plate
3. USB Cable 4. Monitor Power Cable
5. Needle
SCOPE OF DELIVERY
6
FRONT:
Description
Wake-up / Sleep
Menu
Up p / Cam 1 / Split-Screen
Power / Enter
Down q / Cam 2 / Split-Screen
TECHNICAL DESCRIPTION
7
BACK-UP-CAMERA:
Description
USB-charging socket & Pairing-Button (underneath a rubber cover)
Fixation-screws
On/Off Slide-Switch (Note: no button, no rocker switch)
®
8
These instructions do not apply to all vehicles. They are only meant as a general guide due to the
number of different makes & models. For vehicle-specific questions contact your vehicle’s
manufacturer.
Backup-Camera Installation
There are several ways to mount the camera on the back of your car. But the most convenient is to
mount it above or under the license plate.
The camera itself is mounted on the mounting plate. The camera is tiltable: the camera angle can be
adjusted manually in the vertical direction. Make sure that its field of view is not obstructed.
With some type of cars, it is not possible to mount the camera near the license plate. You may have to
find another spot at the back of your car to mount it.
1. The camera is powered by an internal battery, that can be charged by USB or the integrated solar
cells. Before installation, it is highly recommended to use the delivered micro-USB cable to fully
charge the internal battery of the camera-unit via USB (please charge for at least 5 hours with a
mobile phone adapter or a USB-powerbank). Please also make use of the USB charging socket, if your
car is parked without sunlight for a longer period of time and the internal battery is empty.
2. Make sure the slide switch on the back of the camera unit is turned to ON-position. This switch is
only used for storage purposes in order to prevent a deep discharge of the battery. While the camera
is installed at the number plate there is no use of the switch and it can be hidden behind the plate.
Note: This switch is under a rubber cover. It is a slide-switch (no button or rocker switch).
INSTALLATION
9
3. Adjust the camera angle
Depending if you like to put the camera on top or on bottom of the number plate you can change the
whole camera + solar panel upside down to get the right angle of the camera (camera only rotates
in one direction)
Loosen all the fixation screws and turn camera + solar upside down. Tighten the screws again when
finished.
Loosen the two fixation screws and adjust the camera angle to the desired position. Check the angel
of the camera by holding the camera to the planned fixation spot on the number plate. Tighten the
screws again when finished.
180°
10
4. Fixation on top of the number plate:
Remove the rear license plate, and then loosen the license plate bolts/screws.
Position the supplied mounting plates (with camera together) behind the license plate bracket.
Secure both license plate bracket and mounting plates with the license plate bracket bolts/screws.
5. Fixation on bottom of the number plate:
Mount the license plate on the license plate bracket.
11
Monitor Installation
When choosing a location to mount the monitor, make sure the monitor is in an
area that will not obstruct your vision while driving.
1. Before mounting the monitor, clean the mounting surface well.
2. Position the suction mount to the smooth surface which suits your
requirement.
3. Press the suction cap against the smooth surface and press the lock down to attach and fix the
mount to the surface.
4. Snap in the monitor to the suction mount.
5. Adjust the mounting arms to suit your view angle to the monitor and tighten the screws on the
mount to fix the position.
6. Route the power cable to the vehicle’s cigarette lighter socket 12V/24V power outlet. The cable
must not interfere with the safe operation of the vehicle.
7. Insert the small 12V/24V DC plug of the power cable into the right side of the monitor.
8. Plug the 12V/24V cigarette lighter plug into the vehicle’s cigarette lighter socket.
To maximize the effectiveness of the suction mount, it is recommended that the application be
performed under the following conditions:
Surface temperature should be between 21 and 38 degrees Celsius.
Application below 10 degrees should be avoided.
Application should not occur in direct sunlight.
Mounting should be protected from exposure to direct sunlight for a period of 24 hours.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pro-User DRC4310Solar bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pro-User DRC4310Solar in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 12,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info