6
The 'operating' indicator light (5) will come on whenever either the "WARM AIR" or "HOT AIR" setting
is selected and when the desired temperature has been preset with switch 2.
The heating element will continue heating until the room temperature has reached the temperature preset
with the thermostat. The element will then switch off automatically and only the 'standby' indicator light
(5) will stay on. The room temperature will remain above the set temperature for a time before gradually
dropping back. As the room temperature falls below the preset temperature, the heater will switch back on
automatically. This process will keep repeating itself.
While the heater is in use, it is possible to make it rotate, spreading the (hot) air more evenly throughout
the room. The rotation mechanism can be activated using the rotation button (3). When the set temperature
has been reached, the heater will also stop rotating and will continue again when the heater switches back
on automatically.
CLEANING
Do not forget that cleaning can only be performed after the plug has been removed from the socket.
The heater should be cleaned as follows:
* Switch off the appliance.
* Remove the plug from the socket.
* Wait until the heater has cooled down sufficiently.
* Use a damp cloth to wipe the outside of the appliance. Do not use abrasive or aggressive cleaning
agents, including scouring powder and scourers.
* The appliance should be cleaned at least twice a year (with average usage).
NEVER IMMERSE THE APPLIANCE IN WATER OR ANY OTHER LIQUID.
PRINCESS TIPS
- This fan heater is suitable for household use only.
- Make sure the cord or extension cord is carefully positioned so as to prevent anyone tripping over it.
- If the heater or cord is damaged, we advise you not to use the appliance but to take it to the retailer
for repair. Damaged cords can only be replaced by our service department.
- Never use the heater outdoors.
- Keep out of reach of children.
- Place the fan heater on a sturdy table or cupboard or other stable surface. Do not place the fan heater
at or near an open window. Ensure there are no objects in the direct vicinity of the appliance.
- Do not use the fan heater in damp rooms such as bathrooms and do not use it near a washbasin or any
other water container.
- Make sure there are no curtains or clothing hanging near the heater.
- Do not move the heater when it is switched on.
U.K. WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the following code:
BLUE = neutral, BROWN = LIVE, GREEN-YELLOW = EARTH
As the colours of the wire in the mains lead of this appliance may not correspond with the colour
markings identifying the terminals on your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the
letter N or coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked
with the letter L or coloured red.
The wire which is coloured GREEN-YELLOW must be connected to the earth terminal
which is marked with the letter E or or coloured green and yellow.
With this appliance, if a 13 amp plug is used a 13 amp fuse should be fitted. If any other
type of plug is used a 15 amp fuse must be fitted either in the plug or at the distribution
board.
