Clean the accessories:•
- Clean the removable pan, the extender
ring and the stirring paddle in soapy
water. Rinse the removable pan, the
extender ring and the stirring paddle
under running water. Thoroughly dry
the removable pan, the extender ring
and the stirring paddle with a clean, dry
cloth.
- Clean the low rack, the dual rack and
the tongs in soapy water or in the
dishwasher. Rinse the low rack, the dual
rack and the tongs under running water.
Thoroughly dry the low rack, the dual
rack and the tongs with a clean, dry
cloth.
Description (fig. A & B)
Your 182010 Princess multi fryer been
designed for use preparing food using hot air
(dry roasting). The appliance can be used as a
regular oven and a stir-fry oven. The appliance
is suitable for preparing solid food (e.g. fish,
meat, poultry, vegetables, fruit). The appliance
is not suitable for preparing liquid food (e.g.
soups, sauces or curries). The appliance is
suitable for indoor use only. The appliance is
suitable for domestic use only.
1. Control panel
2. Power indicator
3. Time control knob
4. Heating indicator
5. Temperature control knob
6. Lid
7. Extender button
8. Removable pan
9. Stirring paddle
10. Low rack
11. Dual rack
12. Extender ring
13. Tongs
Initial use (fig. A)
Before you proceed, we need you to pay
attention to the following notes:
- Make sure that there is sufficient space
around the appliance to allow heat to
escape and provide sufficient ventilation.
Place the appliance on a stable and flat •
surface.
Open the lid (6).•
Clean the appliance. Refer to the section •
"Cleaning and maintenance".
Place the removable pan (8) into the •
appliance.
Close the lid (6).•
Insert the mains plug into the wall socket. •
The power indicator (2) comes on.
Turn the temperature control knob (5) to •
the maximum temperature (220 °C).
Turn the time control knob (3) to 5 •
minutes. The heating indicator (4) comes
on. The appliance starts heating.
If the process is completed, the appliance •
stops heating. The heating indicator (4)
goes off.
Remove the mains plug from the wall •
socket. The power indicator (2) goes off.
Allow the appliance to cool down •
completely.
Note: If you switch on the appliance for the
first time, the appliance may emit a little
smoke and a characteristic smell for a short
period. This is normal operation.
Assembly (fig. A)
Before you proceed, we need you to pay
attention to the following notes:
- Before assembly or disassembly, remove
the mains plug from the wall socket and
wait until the appliance has cooled down.
Regular oven (fig. C)
Without extender ring (fig. C1)
Open the lid (6).•
Place the removable pan (8) into the •
appliance.
Place the low rack (10) or the dual rack •
(11) into the removable pan (8).
Close the lid (6).•
With extender ring (fig. C2)
Open the lid (6).•
Keep the extender button (7) pressed and •
raise the lid (6).
Place the removable pan (8) into the •
appliance.
