582079
7
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
POWXQG4060 EN
Copyright © 2014 VARO P a g e | 7 www.varo.com
7.2 Assembly requirements
Warning: do not start saw engine until unit is properly prepared.
Your new chain saw will require adjustment of chain, filling the fuel tank with correct fuel
mixture and filling the oil tank with chain lubricating oil before the unit is ready for operation.
Read the entire user manual before attempting to operate your unit. Pay particular attention to
all safety precautions.
Your user manual is both a reference guide and handbook provided to furnish you with
general information to assemble, operate and maintain your saw.
7.3 Guide bar / saw chain / clutch cover installation
Warning: always wear protective gloves when handling chain.
7.3.1 To install the guide bar
To ensure the bar and chain receive oil, only use the original style bar with the oil passage
hole (A) as illustrated above. (fig. 3a)
Make sure the chain brake lever is pulled back into the disengaged position(fig. 3a)
Remove the bar retaining nut(s) (B). Remove the chain brake cover (C) by pulling straight
out, some force may be required. (fig. 3c).Remove yellow spacer before mounting the bar.
Place the slotted end of the guide bar over the bar bolt (F). Slide guide bar behind clutch
drum (G) until the guide bar stops (fig. 3d).
7.3.2 To install saw chain:
Always wear heavy duty gloves when handling saw chain or making saw chain adjustments.
Spread chain out in a loop with cutting edges (1) pointing clockwise (fig. 4a).
Slip the chain around the sprocket (B) behind the clutch (C). Make sure the links fit
between the sprocket teeth (fig. 4b).
Guide the drive links into the groove (D) and around the end of the bar (fig. 4b).
Note: the saw chain may droop slightly on the lower part of bar. This is
normal.
Pull guide bar forward until chain is snug. Ensure all drive links are in the bar groove.
Install the clutch cover making sure the tang is positioned in the lower hole in the guide
bar. Make sure the chain does not slip off of the bar. Install the bar retaining nut hand tight
and follow tension adjustment instructions in section saw chain tension adjustment.
Note: the guide bar retaining nuts are installed only hand tight at this point
because saw chain adjustment is required. Follow instructions in section
saw chain tension adjustment.
7.3.3 Saw chain tension adjustment
Proper tension of saw chain is extremely important and must be checked before starting, as
well as during any cutting operation.
Taking the time to make needed adjustments to the saw chain will result in improved cutting
performance and prolonged chain life.
Warning: always wear heavy duty gloves when handling saw chain or
making saw chain adjustments.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWXQG4060 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWXQG4060 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWXQG4060

Powerplus POWXQG4060 Gebruiksaanwijzing - Nederlands - 22 pagina's

Powerplus POWXQG4060 Gebruiksaanwijzing - Deutsch - 23 pagina's

Powerplus POWXQG4060 Gebruiksaanwijzing - Français - 22 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info