672548

Powerplus POWXG90400 Handleiding

8
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
POWXG90400 EN
Copyright © 2018 VARO P a g e | 1 www.varo.com
1 APPLIANCE ..................................................................................... 2
2 DESCRIPTION (FIG. A) ................................................................... 2
3 PACKAGE CONTENT LIST ............................................................. 2
4 ADDITIONAL SAFETY INSTRUCTIONS FOR HIGH-PRESSURE
CLEANERS ...................................................................................... 2
4.1 Mains power connection ........................................................................................ 3
4.2 Water connection .................................................................................................... 4
4.3 Safety devices ......................................................................................................... 4
5 ASSEMBLY ...................................................................................... 4
5.1 Assembly of storage hook ..................................................................................... 4
5.2 Assembly of the gun (Fig. 1) .................................................................................. 4
6 OPERATION ..................................................................................... 4
6.1 Connection of garden hose (Fig. 2) ....................................................................... 4
6.2 Mounting of high pressure hose (Fig. 3) ............................................................... 5
6.3 Mounting of lance and nozzle ................................................................................ 5
6.4 Water connection .................................................................................................... 5
6.5 Start/stop of the machine ....................................................................................... 5
6.6 Adjustable nozzle (Fig. 5) ....................................................................................... 6
7 PARAMETRY TECHNICZNE ........................................................... 6
8 EMISJA DŹWIĘKU ........................................................................... 6
9 MAINTENANCE AND CLEANING ................................................... 6
9.1 Cleaning of inlet filter ............................................................................................. 6
9.2 Cleaning of air vents ............................................................................................... 7
9.3 Greasing of couplings ............................................................................................ 7
10 STORAGE ........................................................................................ 7
11 TROUBLE SHOOTING .................................................................... 7
POWXG90400 EN
Copyright © 2018 VARO P a g e | 2 www.varo.com
HIGH PRESSURE WASHER 1200W
POWXG90400
1 APPLIANCE
Your high pressure cleaner has been designed for outdoors cleaning. Cleaning of: machines,
vehicles, structures, tools, facades, terraces, gardening tools,…
UWAGA! Proszę dla własnego bezpieczeństwa przeczytać ten podręcznik
oraz ogólną instrukcję zasad bezpiecznego użytkowania przed
zastosowaniem urządzenia. Elektronarzędzie należy przekazywać innym
osobom wyłącznie z niniejszym podręcznikiem.
2 DESCRIPTION (FIG. A)
1. Water inlet coupling
2. Storage hook
3. Water outlet
4. Switch
5. Trolley handle
6. Gun holder
7. High pressure hose
8. Trigger gun
9. Trigger lock
10. Lance
11. Adjustable Nozzle
12. Hose lock button Gun
13. Hose lock button Machine
3 PACKAGE CONTENT LIST
▪ Remove all packing materials
▪ Remove remaining packaging and transit supports (if existing)
▪ Check the completeness of the packing content
▪ Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
▪ Keep the packaging materials as far as possible till the end of the warranty period. Dispose
it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1x high pressure washer
1x trigger
1x extended lance for gun
1x adjustable nozzle
1x water inlet connector
1x 3m pressure hose
1x manual
1 x cleaning needle
When parts are missing or damaged, please contact your dealer.
4 ADDITIONAL SAFETY INSTRUCTIONS FOR HIGH-PRESSURE
CLEANERS
▪ The appliance is designed solely for outdoor private use and NOT for commercial use.
Please keep it away from heat, direct sunlight, moisture and rain, frost and sharp edges.
▪ Do not let people who have not been trained in the use of a high pressure washer nor read
the instruction manual operate the machine!
▪ High pressure cleaners shall not be used by children or untrained personnel.
▪ Children should be supervised to ensure that they do not play with the appliance.
POWXG90400 EN
Copyright © 2018 VARO P a g e | 3 www.varo.com
▪ Before starting up your machine please check it carefully for any defects. If you find any,
do not start up your machine and contact your local distributor.
▪ Check especially the insulation of the electric cable should be faultless and without any
cracks. If the electric cable is damaged, an authorized local service centre should replace
it.
WARNING: High pressure jets can be dangerous if subject to misuse. The
jet must not be directed at persons, live electrical equipment or the
appliance itself.
WARNING: Do not use the appliance within range of persons unless they
wear protective clothing.
▪ Do not direct the jet against yourself or others in order to clean clothes or foot-wear.
▪ Hold the spray lance firmly with both hands.
▪ The operator and anyone in the immediate vicinity of the site of cleaning should take
action to protect them from being struck by debris dislodged during operation.
▪ Wear goggles and protection clothes during operation.
▪ Disconnect from electrical power supply before carrying out user maintenance.
▪ To ensure appliance safety, use only original spare parts from the manufacturer or
approved by the manufacturer.
▪ Do not use the appliance if a supply cord or important parts of appliance are damaged,
e.g. safety device, high pressure hose and trigger gun.
▪ Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it
immediately. Do not put it in water.
▪ Tires and tire valves may be damaged by the high-pressure jet and then burst.
▪ Never use the machine in an environment where there could be a danger of explosion.
▪ It is not allowed to clean asbestos- containing surfaces with high pressure.
▪ This high pressure washer must not be used at temperatures below 0°C
WARNING: High pressure hoses, fittings and couplings are important for
the safety of the appliance. Use only hoses, fittings and couplings
recommended by the manufacturer.
WARNING: Inadequate extension cables can be dangerous. Cables on reels
should always be completely unwinded to prevent the cable from
overheating.
▪ If an extension cable is used, the plug and the socket must be waterproof and comply with
the below-mentioned requirements for length and cable dimensions.
1.0 mm² max. 12.5 m
1.5 mm² max. 20 m
▪ If the electric cable is damaged, it must be replaced by the manufacturer or his service
agent or similarly qualified person in order to avoid a hazard.
4.1 Mains power connection
The following should be observed when connecting the high pressure washer to the electric
installation:
▪ The electric supply connection shall be made by a qualified electrician and comply with
IEC 60364-1
POWXG90400 EN
Copyright © 2018 VARO P a g e | 4 www.varo.com
▪ It is recommended that the electric supply to this appliance should include either a residual
current device that will interrupt the supply if the leakage current to earth exceeds 30 mA
for 30 ms.
4.2 Water connection
▪ Connection to the public mains according to regulations.
▪ Inlet hose can be connected to the water mains with a max. inlet pressure of 12 bars.
This high pressure washer is in Europe only allowed to be connected with the
drinking water mains, when an appropriate mains backflow preventer has been
installed, Type BA according to EN 1717. The length of the hose between the
backflow preventer and the high pressure washer must be at least 10 metres to
absorb possible pressure peaks (min diameter ½ inch).
▪ Operation by suction (for example from a rainwater vessel) is carried out without backflow
preventer.
▪ As soon as water has flown through the BA valve, this water is not considered to be
drinking water any more.
IMPORTANT! Only use water without any impurities. If there is a risk of
sand particles in the inlet water (i.e. from your own well), an additional filter
should be mounted.
4.3 Safety devices
▪ The unloader valve can reduce pressure if it exceeds pre-set values.
▪ Locking device on trigger gun (9): The trigger gun (8) features a locking device (9). When
the knob is activated, the trigger gun (8) cannot be operated.
▪ A thermal sensor protects the motor against overloading. The machine will restart after a
few minutes when the thermal sensor has cooled.
5 ASSEMBLY
This section will explain in details how to make you high pressure washer ready for use.
5.1 Assembly of storage hook
Slide the storage hook into the holder.
5.2 Assembly of the gun (Fig. 1)
▪ Insert the extended lance into the gun. Push and turn the extended lance clockwise onto
the gun. When the pieces are joined properly, you cannot separate the two components
by pulling straight out on the gun.
▪ Insert the spray adjustable nozzle into the extension wand, as quick-connect type, you just
need push it onto extension wand directly and powerful until hand tight to lock it in place.
When the pieces are joined properly (cam adjustable nozzle must fit into slot from
extension wand), you cannot separate the two components by pulling straight out on the
extension wand
6 OPERATION
6.1 Connection of garden hose (Fig. 2)
▪ Before attaching the water inlet connector to the pressure washer remove the plastic cap.
▪ Attach the hose connector (with built-in filter) to pressure washer.
▪ Connect the garden hose with a standard quick coupling
POWXG90400 EN
Copyright © 2018 VARO P a g e | 5 www.varo.com
6.2 Mounting of high pressure hose (Fig. 3)
1. Attach the high pressure hose to the trigger gun and machine.
2. Detach the high pressure hose by pressing the pawl (A) or button (B)
6.3 Mounting of lance and nozzle
1. Push the lance into the trigger gun
2. When inserted turn it. Caution: Make sure the lance is properly fixed to the gun
3. Attach the nozzles. Push it powerful onto the lance. Check before activating the trigger
that the nozzle is properly fixed.
6.4 Water connection
An ordinary 1/2" garden hose of min. 10 m and max. 25 m will be suitable.
IMPORTANT! Only use water without any impurities. If there is a risk of
sand particles in the inlet water (i.e. from your own well), an additional filter
should be mounted.
1. Let the water run through the water hose before connecting it to the machine to prevent
sand and dirt from penetrating the machine. Note: Check that the filter is fitted in the
water inlet pipe and that it is not clogged up.
2. Connect the water hose to the water supply by means of the quick connector (inlet water,
max. pressure: 12 bar, max. temperature: 50°C).
3. Turn on the water.
6.5 Start/stop of the machine
The trigger gun and lance is affected by a thrust during operation - therefore always hold it
firmly with both hands.
IMPORTANT: Point the nozzle at the ground.
This high pressure cleaner is equiped with an automatically sart/stop
system, based on waterpressure.
1. Check that the machine is in upright position. NOTE: Do not place the machine in high
grass!
2. Release the trigger lock
3. Activate the trigger of the trigger gun and let the water run until all air has escaped from
the water hose.
4. Turn the Start/stop switch to the right
5. Activate the trigger of the trigger gun.
6. Always adjust the distance and thus the pressure of the nozzle to the surface, which is to
be cleaned.
Do not cover the machine during operation or use it in a room without adequate ventilation!
NOTE: If the machine is left or not used for 5 minutes, it must be switched off on the start/stop
switch (4) "O":
1. Turn the start/stop switch to the left "O".
2. Disconnect the electrical plug from the socket.
3. Shut off the water supply and activate the trigger of the trigger gun to relieve the machine
of pressure.
4. Lock the trigger gun. (Fig. 4)
When releasing the trigger of the trigger gun, the machine automatically stops. The machine
will start again when you re- activate the trigger gun.
POWXG90400 EN
Copyright © 2018 VARO P a g e | 6 www.varo.com
6.6 Adjustable nozzle (Fig. 5)
The pressure can for the adjustable nozzle be adjusted by tuning it.
WARNING: Do not do this under operation to avoid that the hand hits the
jet.
7 PARAMETRY TECHNICZNE
POWXG90400
Motor TYPE
Brush motor
Pressure (Mpa)
7
Max. Pressure (Mpa)
10
Voltage
220-240V / 50Hz
Power
1200W
Flow
6,5 L/min
Water temperature
Max 50°C
Weight
5 kg
8 EMISJA DŹWIĘKU
Wartości emisji hałasu, zmierzone zgodnie z odpowiednią normą. (K=1,5 m/s²)
Poziom ciśnienia akustycznego LpA
75 dB(A)
Poziom mocy akustycznej LwA
92 dB(A)
UWAGA! Moc akustyczna dźwięku może przekraczać 85 dB(A), w takim
wypadku należy zastosować środki indywidualnej ochrony słuchu.
aw (vibration level):
< 2,5 m/s²
9 MAINTENANCE AND CLEANING
WARNING! Always disconnect the electrical plug from the socket prior to
maintenance or cleaning.
To ensure a long and problem free working life, please take the following advice:
▪ Wash out water hose, high pressure hose, spray lance and accessories before mounting
▪ Clean the connectors of dust and sand.
▪ Rinse the detergent spraying attachment after use.
▪ Clean the nozzles.
Any repair should always be made in an authorized workshop with original spare parts
9.1 Cleaning of inlet filter
▪ Clean the water inlet filter regularly Flush with water to remove dirt and debris.
CAUTION: Failure to fit the filter will invalidate the warranty
POWXG90400 EN
Copyright © 2018 VARO P a g e | 7 www.varo.com
9.2 Cleaning of air vents
The machine should be kept clean so as to let cooling air pass freely through the machine
vents.
9.3 Greasing of couplings
To ensure an easy connection and that o-rings do not dry up; the couplings should be greased
regularly.
10 STORAGE
The machine should be stored in a frost-free room!
Pump, hose and accessories should always be emptied of water prior to storing as follows:
1. Stop the machine (turn the start/stop switch “O” and detach water hose and nozzle.
2. Restart the machine and activate the trigger of the trigger gun. Let the machine run until
no more water runs through the trigger gun
3. Stop the machine, unplug and wind up hose and cable.
4. Place trigger gun, lance, nozzles and other accessories in the holders of the machine.
The hook can be used for storage of the hose and cord
Should the machine by mistake be frozen, it will be necessary to check it for damage.
WARNING: Never start up a frozen machine. Frost damages are not covered
by the guarantee!
11 TROUBLE SHOOTING
SYMPTOM
CAUSE
RECOMMENDED ACTION
Machine refuses to
start
Machine not plugged in
Plug in machine.
Defective socket
Try another socket.
Defective extension cable
Try without the extension cable.
Fluctuating pressure
Pump is sucking air
Check that hoses and connections
are airtight.
Valves dirty, worn out or stuck
Contact your nearest service centre
Water supply not sufficient
Increase water pressure, check for
blockage of garden hose and/or
change to bigger hose.
Pump seals worn
Contact your nearest service centre
Machine stops
Incorrect mains voltage
Check that the mains voltage
corresponds to specification on the
name plate
Thermal sensor activated
Leave the machine for 5 minutes to
cool down
Nozzle partially blocked
Clean the nozzle with a needle and
by spraying water backwards
through the nozzle
Amperage increase
Try without the extension cable.
Machine pulsating
Air in inlet hose/pump
Allow machine to run with open
trigger until regular working pressure
resumes.
Inadequate supply of mains
water
Increase water pressure, check for
blockage of garden hose and/or
POWXG90400 EN
Copyright © 2018 VARO P a g e | 8 www.varo.com
change to bigger hose.
Nozzle partially blocked
Clean the nozzle with a needle and
by spraying water backwards
through the nozzle
Water filter blocked
Clean the filter
Hose kinked
Straighten out hose.
Machine often starts
and stops by itself
Pump and/or trigger gun is
leaking
Contact your nearest service centre
No water supply
Connect inlet water.
Machine starts but
no water comes out
Water filter blocked
Clean the filter
Nozzle blocked
Clean the nozzle with a needle and
by spraying water backwards
through the nozzle
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWXG90400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWXG90400 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Powerplus POWXG90400

Powerplus POWXG90400 Gebruiksaanwijzing - Nederlands - 8 pagina's

Powerplus POWXG90400 Gebruiksaanwijzing - Deutsch - 8 pagina's

Powerplus POWXG90400 Gebruiksaanwijzing - Français - 8 pagina's

Powerplus POWXG90400 Aanvulling / aanpassing - Alle talen - 5 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info