Handleiding Powerplus POWXG7216 (pagina 5 van 15) (Engels)

725398

Verklein

Vergroot

Pagina terug

1/15

Pagina verder

POWXG7216 EN

1 APPLICATION .................................................................................. 3

2 DESCRIPTION ................................................................................. 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 4

5 ADDITIONAL SAFETY RULES FOR CULTIVATORS .................... 4

5.1 To ensure safe operation ........................................................................................ 5

5.1.1 Operator responsibility .............................................................................................. 5

5.1.2 Child safety ............................................................................................................... 5

5.1.3 Thrown object hazard ................................................................................................ 5

5.1.4 Fire and burn hazard ................................................................................................. 5

5.1.5 Carbon monoxide poisoning hazard .......................................................................... 6

5.1.6 Operation on slope .................................................................................................... 6

6 PETROL SAFETY WARNINGS ....................................................... 6

7 VIBRATION AND NOISE REDUCTION........................................... 6

8 EMERGENCY ................................................................................... 7

9 RESIDUAL RISKS............................................................................ 7

10 ASSEMBLY INSTRUCTIONS .......................................................... 7

10.1 Handle bar bracket assembly (FIG.2-3) .................................................................. 7

10.2 Cable assembly (Fig. 4) .......................................................................................... 7

10.3 Reverse cable assembly (FIG. 5)) ........................................................................... 7

10.4 Wheel assembly (FIG. 6-7) ...................................................................................... 7

10.5 Assembly of the bumper (FIG.8), fender (19) and the handle bar cover .............. 8

11 CONTROLS ...................................................................................... 8

11.1 Fuel valve lever (FIG. 9) .......................................................................................... 8

11.2 Choke throttle lever (FIG. 10) ................................................................................. 8

11.3 Engine switch (FIG. 11) ........................................................................................... 8

11.4 Throttle lever handle bar ........................................................................................ 8

11.5 Forward lever (FIG. 13) .......................................................................................... 8

11.6 Reverse lever........................................................................................................... 8

11.7 Tilling depth adjustment (FIG. 14) .......................................................................... 8

POWXG7216 EN

12 BEFORE OPERATION .................................................................... 9

12.1 Add or check engine oil level ................................................................................. 9

12.2 Add or check transmission oil level ...................................................................... 9

12.3 Add fuel to fuel tank ................................................................................................ 9

13 OPERATING INSTRUCTIONS ........................................................ 9

13.1 Pre- First - Start Inspection .................................................................................... 9

13.2 Adjusting the handle height (FIG. 15) .................................................................... 9

13.3 Starting the engine ................................................................................................ 10

13.4 Tilling ..................................................................................................................... 10

13.5 Stopping the engine .............................................................................................. 10

14 MAINTENANCE ............................................................................. 11

14.1 Maintenance schedule .......................................................................................... 11

15 STORAGE ...................................................................................... 11

15.1 Prepare for storage ............................................................................................... 11

16 TROUBLESHOOTING AND REPAIR ............................................ 12

17 TECHNICAL DATA ........................................................................ 13

18 NOISE ............................................................................................. 13

19 SERVICE DEPARTMENT .............................................................. 13

20 WARRANTY ................................................................................... 14

21 ENVIRONMENT ............................................................................. 14

22 DECLARATION OF CONFORMITY .............................................. 15

POWXG7216 EN

CULTIVATOR 196CC

POWXG7216

1 APPLICATION

The petrol cultivator is suitable for cultivating the sandy and clayey soil of a canopied

vegetables base and dry land. For weedy and deep plots, remove the weeds before using

the cultivator to cultivate the land. It is not designed for commercial use.

WARNING! For your own safety, read this manual and the general safety

instructions carefully before using the appliance. Your power tool should

only be given to other users together with these instructions.

2 DESCRIPTION

1. Fuel valve lever

2. Choke lever

3. On/off switch

4. Throttle lever

5. Forward lever

6. Handle bar

7. Reverse lever

8. Depth regulator

9. Oil fill cap engine

10. Oil fill cap transmission

11. Fuel cap

12. Air filter

13. Spark plug

14. Recoil starter

15. Handle height adjuster

16. Blades

17. Silencer

18. Fuel tank

19. Fender

20. Wheels

21. Bumper

22. Handle bar bracket

23. Throttle lever handle bar

a. Handle bar bracket

b. Locking bolts

c. Locking nuts

d. Clutch cable head

e. Cable guide

f. Locking nuts

g. Free wheel position

h. Clevis pin

i. Locking ring

j. Tilling position

k. Locking screws

l. Fuel valve lever

m. Choke throttle lever

n. Engine switch

o. Throttle lever

p. Main clutch lever

q. Engaged

r. Disengaged

s. Drag bar

t. Height adjusting bolt

u. Starter grip

v. Lock button

3 PACKAGE CONTENT LIST

 Remove all packaging materials.

 Remove remaining packaging and packing inserts (if included).

 Check that the package contents are complete.

 Check the appliance, the power cord, the power plug and all accessories for transportation

damage.

 Keep the packaging materials as far as possible until the end of the warranty period. Then

take it to your local waste disposal system.

POWXG7216 EN

WARNING Packaging materials are not toys! Children must not play with

plastic bags! There is a danger of suffocation!

1 x Cultivator

1 x Spark plug wrench

1 x Screw driver

1 x Wrench 8-10mm

1 x Wrench 12-14mm

1 x Instruction Manual

If any parts are missing or damaged, please contact your dealer.

4 SYMBOLS

The following symbols are used in this manual and/or on the machine:

Denotes risk of personal

injury or damage to the tool.

Wear gloves

Read manual before use

In accordance with essential safety

standards of applicable European

directives

Wear noise protection

No naked flame

Wear eye protection

No smoking

Wearing of protective shoes

advised

Cutting danger

Keep bystanders away

Warning! Flying objects

5 ADDITIONAL SAFETY RULES FOR CULTIVATORS

For your safety and the safety of others, please pay special attention to these precautions

 This cultivator is designed to give safe and dependable service if operated according to

instructions.

 Read and understand the owner's manual before operating the cultivator. Failure to do so

could result in personal injury or equipment damage.

 Exhaust gas contains poisonous carbon monoxide.

 Never run the cultivator in an enclosed area.

 Be sure to provide adequate ventilation.

 If a ventilation system is installed, ensure you follow the applicable safety rules.

 The rotating parts are sharp and they turn at high speed. Accidental contact can cause

serious injury.

 Keep your hands and feet away from the parts while engine is running.

 Stop the engine and disengage the tines clutch before inspection or maintenance of tines.

POWXG7216 EN

 Disconnect the spark plug cap to prevent any possibility of accidental starting. Wear heavy

gloves to protect your hands when clearing the tines or when inspecting or replacing the

tines.

5.1 To ensure safe operation

5.1.1 Operator responsibility

 Keep the cultivator in good operating condition. Operating a cultivator in poor or

questionable condition could result in serious injury.

 Be sure all safety devices are in working order and warning labels are in place. These

items are installed for your safety.

 Be sure the safety covers (fan cover, recoil starter cover) are in place.

 Know how to stop the engine and tines quickly in case of emergency. Understand the use

of all controls.

 Keep a firm hold on the handlebars. They may tend to lift during clutch engagement

 Allowing anyone to operate this cultivator without proper training may result in injury.

 Wear sturdy, full-coverage footwear, operating this cultivator barefoot or with open toe

shoes or sandals increases your risk of injury.

 Dress sensibly. Loose clothing may get caught in moving parts, increasing your risk of

injury.

 Be alert! Operating this cultivator when you are tired, ill or under the influence of alcohol or

drugs may result in serious injury.

 Keep all persons and pets away from the tilling area.

 Be sure drag bar is in place and properly adjusted.

5.1.2 Child safety

 Keep children indoors and supervised at all times while any outdoor power equipment is

being used nearby. Young children move quickly and are attracted especially by the tines

and tilling activity.

 Never assume children will remain where you last saw them, be alert and turn the

cultivator off if children enter the area.

 Children should never be allowed to operate the cultivator, even under adult supervision.

5.1.3 Thrown object hazard

 Objects hit by the rotating tines can be thrown from the cultivator with great force, and may

cause severe injury.

 Before tilling, clear the tilling area of sticks, large stones, wire, glass, etc. Till only in

daylight.

 Pieces thrown from worn or damaged tines can cause serious injury. Always inspect the

tines before using the cultivator.

5.1.4 Fire and burn hazard

 Petrol is extremely inflammable, and petrol vapour can explode.

 Use extreme care when handling petrol. Keep petrol out of reach of children.

 Refuel in a well-ventilated area with the engine stopped.

 Allow the engine to cool before refuelling. Fuel vapour or spilled fuel may be ignited.

 The engine and exhaust system become very hot during operation and remain hot for a

while after stopping. Contact with hot engine components can cause burn injuries and can

ignite some materials.

 Avoid touching a hot engine or exhaust system.

POWXG7216 EN

 Allow the engine to cool before performing maintenance or storing the cultivator indoors.

5.1.5 Carbon monoxide poisoning hazard

 Exhaust fumes contain poisonous carbon monoxide, a colourless and odourless gas.

Breathing in exhaust fumes can cause loss of consciousness and may lead to death

 If you run the engine in an area that is confined or even partially enclosed, the air you

breathe could contain a dangerous amount of exhaust gas. To keep exhaust gas from

building up, provide adequate ventilation.

5.1.6 Operation on slope

 When tilling on slopes, keep the fuel tank less than half full to minimize fuel spillage.

 Till across the slope (at equally spaced intervals) rather than up and down it.

 Be very careful when changing the direction of the cultivator on a slope.

 Do not use the cultivator on a slope of more than 10°. The maximum angle for safe

working (as shown) is for reference purposes only and should be determined according to

the type of tool.

 Before starting the engine, check that the cultivator is not damaged and is in good

condition. For your safety and the safety of others, exercise extreme care when using the

cultivator up or down a hill.

6 PETROL SAFETY WARNINGS

WARNING: Use extra care in handling fuels. They are inflammable and the

vapours are explosive. The following points must be observed.

 Use only an approved container.

 Never remove the fuel cap or add fuel with the power source running. Allow engine

exhaust components to cool before refueling.

 Do not smoke.

 Never refuel the machine indoors.

 Never store the machine or fuel containers inside where there is an open flame, such as a

water heater.

 If fuel is spilled, do not attempt to start the power source, but move the machine away

from the area of spillage before starting.

 Always replace and securely tighten the fuel cap after refueling.

 If the tank is drained, this should be done outdoors.

7 VIBRATION AND NOISE REDUCTION

 To reduce the influence of vibration and noise, limit the working time, use the settings for

lower vibration and noise emission and wear personal protective equipment.

 To minimise the vibration and noise load, observe the following points:

1. Use the product only for the intended purpose in accordance with the design and the

instructions.

2. Make sure that the product is in perfect condition and well maintained.

3. Use the right accessories and make sure that they are in good condition.

4. Hold the product firmly, but not too tightly, by the handles provided.

5. Service the product according to these instructions and keep it well lubricated.

6. Plan your working time according to these instructions in order to spread a higher load

over a longer period of time.

POWXG7216 EN

8 EMERGENCY

Familiarise yourself with the use of the product by reading the operating instructions

completely. Note the safety instructions and follow them very carefully. This will help you

prevent risks and hazards.

 Be always alert when using the product, so that you can recognise hazards early and

respond to them. Prompt intervention can prevent serious injuries and material damage.

 Switch off the motor in the event of a problem or unusual noises or vibrations. If

necessary, have the product repaired by a qualified specialist before using the product

again.

9 RESIDUAL RISKS

Even if you operate this power tool according to instructions, some residual risks always

remain. The following hazards may occur in connection with the type and design of this

power tool:

1. Injuries and material damage caused by flying debris.

2. Damage to health resulting from hand-arm vibrations if the power tool is used over a long

period of time or is not properly handled and maintained.

3. Hearing damage if no appropriate hearing protection is worn.

4. Damage and injuries caused by running the product over installed water and power lines.

10 ASSEMBLY INSTRUCTIONS

 Open the packing and remove all loose parts.

 Remove the upper part of the packing.

 Remove the assembly screws (6pcs.) from the metal frame.

 Remove the upper part of the metal frame.

 Remove the protecting foil form the machine.

 Assemble the depth regulator.

10.1 Handle bar bracket assembly (FIG.2-3)

 Fix the handle bar bracket (a) and tighten the bolts (b) and locking nuts (c).

10.2 Cable assembly (Fig. 4)

 Assemble the handle bar.

 Pull the cables through the cable guides (e) on the handle bar.

 Ply the cable guides to close them and use the included straps to keep the cables together

right before the lower and upper cable guide. The cable should not be strained!

10.3 Reverse cable assembly (FIG. 5))

 Pull the cable through the cable guides (e) on the handle bar.

 Fix the cable with the locking nuts (f).

 Fix the reverse lever to the handle bar bracket.

10.4 Wheel assembly (FIG. 6-7)

 Install the wheels.

 The wheels have two positions for different purposes:

 A free wheel position for transportation of the cultivator.

 A tilling position for tilling.

 For the free wheel position (g):

 Pull the clevis pins (h) out of the wheels.

 Put the wheels as close as possible to the middle of the axis; push until you feel resistance.

 Insert the clevis pins in the axis.

POWXG7216 EN

 For the tilling position (j):

 Pull the clevis pins (h) out of the axis.

 Put the wheels at the ends of the axis, the sides of the wheels should align with the ends of

the axis.

 Insert the clevis pins in the wheels.

10.5 Assembly of the bumper (FIG.8), fender (19) and the handle bar cover

 Install the bumper on the front of the cultivator with the screws (k).

 Install the fender (19).

 Install the handle bar cover.

11 CONTROLS

11.1 Fuel valve lever (FIG. 9)

 The fuel valve lever (1) must be in the ON position when starting the engine. Make sure

the fuel drain screw is tightened securely.

 To stop the supply of fuel, turn the fuel valve lever to the OFF position.

11.2 Choke throttle lever (FIG. 10)

 When starting cool engine, turn throttle choke lever (2) to CLOSED position.

 When starting warm engine and operating, turn throttle choke lever to OPEN position.

11.3 Engine switch (FIG. 11)

 Turn the engine switch (3) to the ON position to be able to start the engine.

 To stop the engine, turn the engine switch to the OFF position.

11.4 Throttle lever handle bar

 Adjust the motor speed by moving the throttle lever.

11.5 Forward lever (FIG. 13)

 When the main clutch lever (5) is pressed down, the clutch is engaged and power is

transmitted to the transmission.

 When the main clutch lever is released, the clutch is disengaged and power is not

transmitted.

11.6 Reverse lever

 Raise the handle bar (6) slightly and press down the reverse lever (7) to engage the clutch

and transmit power for a backward movement.

 Use the reverse lever only when necessary to move the cultivator away from an obstacle.

Always check the area behind you and make sure it is clear of any obstacles.

11.7 Tilling depth adjustment (FIG. 14)

 The drag bar of the depth adjustment (8) is used to control the tilling depth.

 The tilling depth can be adjusted by holding the drag bar (s) backward to release it and

sliding the drag bar up and down as necessary.

POWXG7216 EN

12 BEFORE OPERATION

12.1 Add or check engine oil level

Remove the oil filler cap/dipstick (9) and wipe it clean.

Insert the oil filler cap/dipstick into the oil filler neck, but do not screw it in, then remove it to

check the oil level.

If the oil level is near or below the lower limit mark on the dipstick, fill with 4-stroke

automotive detergent oil SAE10W-30 to the upper limit mark. Do not overfill.

Reinstall the oil filler cap/dipstick.

12.2 Add or check transmission oil level

Fill the transmission oil tank before use.

Remove the oil filler cap and check the oil level. The oil level should be about 3cm below the

top of the filler, fill with 80W-90 oil if necessary as described above. Wait 15 minutes after

every fill, check the oil level again and fill more oil if necessary. Repeat until the desired oil

level is reached. Do not overfill the tank.

Reinstall the oil filler cap.

12.3 Add fuel to fuel tank

Remove the fuel tank cap (11)

Use unleaded gasoline with a pump octane rating of 86 or higher or use E10 fuel

Use a suitable funnel to fill in the fuel to the engines fuel tank . Do not spill any fuel or overfill

the tank.

13 OPERATING INSTRUCTIONS

13.1 Pre- First - Start Inspection

IMPORTANT! Engine is shipped from factory without oil. Engine oil must be

added before starting engine. SAE10W-30.

IMPORTANT! Transmission is shipped from factory without oil. Transmission

oil must be added before starting cultivator. 80W-90.

 Make sure all safety guards are in place and all nuts and bolts are secure.

 Check oil level in engine crankcase.

 Inspect air filter (12) for cleanliness.

 Check the fuel supply. Do not fill petrol tank completely, allow space for fuel to expand.

 Be sure spark plug (13) wire is attached and spark plug is tightened securely.

 Check depth regulator lever position.

 Examine underneath and around engine for signs of oil or fuel leaks.

 Inspect fuel hoses for tightness and fuel.

 Look for signs of engine damage.

 Remove excessive debris from silencer (7) area and recoil starter (14).

13.2 Adjusting the handle height (FIG. 15)

 Loosen the height adjusting bolts (t), adjust the height of the handle bar and tighten the

bolts. For normal tilling, the most comfortable position for the operator is if the handle bars

are at waist height.

POWXG7216 EN

13.3 Starting the engine

 Turn the fuel valve lever to the ON position. Check that the fuel drain screw is tightened

securely.

 Move the choke lever to the CLOSED position to start a cold engine.

 Leave the choke lever in the OPEN position to restart a warm engine.

 Turn the engine switch (3) to the ON position.

 Move the throttle lever (4) away from the SLOW position, about 1/3 of the way toward the

FAST position.

 Standing behind the unit, pull the starter rope (14) (FIG. 16) lightly until you feel resistance

then pull briskly.

 Return the starter rope gently.

 If the choke lever was moved to the CLOSED position to start the engine, gradually move

it to the OPEN position as the engine warms.

13.4 Tilling

 Start the engine as above. Let the engine run a few minutes to warm before use.

 Press the lock button and meanwhile press down the main clutch lever (5) and keep it in

grasp, the tines (16) will start rotating and the machine will move forward.

 Release the clutch lever to stop the machine.

 Raise the handle bar (6) slightly, press the lock button and meanwhile press down the

reverse lever (7) and keep it in grasp, the tines will start reverse rotating and the machine

will reverse automatically. Carefully walk the tiller backwards.

 Release the reverse lever to stop the machine. Lower the handle bar.

Do not operate both “forward” and “reverse” clutch levers at the same time.

Move the throttle to the SLOW position before using the reverse lever.

Always check the area behind you and make sure it is clear of any obstacles.

Only use the reverse lever to mover the cultivator away from an obstacle.

13.5 Stopping the engine

 To stop the engine in an emergency, simply turn the engine switch to the OFF position.

 Under normal conditions, use the following procedure:

 Release the main clutch lever to disengage.

 Turn the engine switch to the OFF position.

 Turn the fuel valve lever to the OFF position.

POWXG7216 EN

14 MAINTENANCE

Engine should be off before adjusting any controls.

14.1 Maintenance schedule

Keeping your cultivator in top running condition will prolong its life, and help you obtain

optimum performance.

Please read this normal care schedule, and note the recommended care operating intervals

to extend the life of your unit.

Maintenance Operation

Each

Use

First

month or

20 hours

Every 3

months or

50 hours

Every 6

months or

100 hours

Every year

or 300

hours

Engine oil

Check level

√

Change

√

Transmission oil

Check level

√

Air filter

Check

√

Clean

√ (1)

Replace

√

Clutch cable

Adjust

√

Belt Tension

Adjust

√ (2)

Sediment cup

Clean

√

Reverse cable

Adjust

√

Idle speed

Check-

adjust

√

Valve clearance

Check-

adjust

√

Combustion

chamber

Clean

After every 1000 hours

Fuel tank & filter

Clean

√

Spark plug

Check

√

Replace

√

All fasteners (for

tightness)

Check-

tighten

Initial 10 hours

Fuel tube

Check

Every 2 years (Replace if necessary)

(1) Service more frequently when used in dusty areas.

(2) Replace the belt if it is cracked or shows abnormal wear.

15 STORAGE

15.1 Prepare for storage

Follow the steps below to prepare your cultivator for storage.

 Protect wheels and axles from rust:

 Drain fuel system completely, start the engine and let it run until it stops due to lack of fuel,

or add fuel stabilizer to prevent fuel from becoming unusable during extended storage

period.

 While engine is still warm, drain the oil from the engine. Refill with fresh oil of the

recommended grade.

 Clean external surfaces, engine and cooling fan.

 Remove sparking plug, pour ca. 30ml of SAE 30 oil into sparking plug hole.

 Pull starter cord slowly a couple of times to distribute oil evenly in cylinder head area.

POWXG7216 EN

 Reinstall sparking plug.

 Transport unit to a suitable storage location. If you have chosen to use a fuel stabilizer and

have not drained the fuel system, follow all safety instructions and storage precautions in

this manual to prevent the possibility of fire due to the ignition of petrol fumes. Remember,

petrol fumes can travel to distant sources of ignition and ignite, causing explosions and

fire.

 If there is any possibility of unauthorized use or tampering, remove the sparking plug and

store it in a safe place before storing the cultivator unit. Be sure to plug the sparking plug

hole to prevent foreign material from entering.

16 TROUBLESHOOTING AND REPAIR

While normal care and routine maintenance will extend the life of your cultivator, prolonged

or constant use may eventually require it to be serviced in order to allow it to continue to

operate properly. The troubleshooting guide below lists the most common problems, causes

and remedies.

PROBLEM

REMEDY/ACTION

Engine will not start or

hard to start

Add fuel to fuel tank.

Place throttle control 1/3 away from SLOW

If engine is flooded, wait several minutes before starting again

Connect sparking plug wire to sparking plug

Throttle must be positioned at choke for a cold start

Clean or replace air filter

Drain old fuel and replace with fresh. Use fuel stabilizer at end of

season

Make sure sparking plug wire is securely attached to sparking plug

Incorrect carburetor adjustment, take to authorized engine service

center

Engine misses or

lacks power

Raise the tines for shallow tilling by lowering the depth regulator

lever

Clean or replace air filter

Incorrect carburetor adjustment, take to authorized engine service

center

Replace sparking plug and adjust gap

Drain and refill petrol tank and carburetor

Engine overheats

Clean or replace air filter

Clean cylinder fins, air filter, muffler

Incorrect carburetor adjustment, take to authorized engine service

center

Cultivator is difficult to

control when tilling

(machine jumps or

lurches forward)

Lock wheels in tilling position

Raise the tines for shallower tilling by lowering the depth regulator

lever

Tines turn, cultivator

does not move

Lower the tines for deeper tilling by raising the depth regulator lever

Excessive heat builds

up in transmission/tine

area during tilling

Remove vegetation by following instructions in Clean Tine Axle Shaft

of Normal Care section. FOLLOW ALL SAFETY INSTRUCTIONS

Check transmission fluid and fill if needed

POWXG7216 EN

17 TECHNICAL DATA

Engine displacement

196cc

Weight

79 kg

Max. rotational speed

max3600 min-1

Cutting width

500mm

Tilling depth

175-350mm

Motor Power

4.8kW

Oil Tank Capacity

600ml

Fuel tank capacity

3600ml

18 NOISE

Noise emission values measured according to relevant standard. (K=3)

Acoustic pressure level LpA

83 dB(A)

Acoustic power level LwA

100 dB(A)

ATTENTION! Wear hearing protection when sound pressure is

over 85 dB(A).

aw (Vibration)

4,3 m/s²

K = 1,5 m/s²

19 SERVICE DEPARTMENT

Damaged switches must be replaced by our after-sales service department.

If the connecting cable (or mains plug) is damaged, it must be replaced by a special

connecting cable which is available from our service department. Replacement of the

connecting cable should be carried out only by our service department (see last page) or by

a qualified specialist (qualified electrician).

POWXG7216 EN

20 WARRANTY

 This product is warranted for a 36-month period effective from the date of purchase by the

first user.

 This warranty covers all material or production flaws excluding : batteries, chargers,

defective parts subject to normal wear & tear such as bearings, brushes, cables, and

plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects

resulting from maltreatment, accidents or alterations; nor the cost of transportation.

 Damage and/or defects resulting from inappropriate use also do not fall under the

warranty provisions.

 We also disclaim all liability for any bodily injury resulting from inappropriate use of the

tool.

 Repairs may only be carried out by an authorised customer service centre for Powerplus

tools.

 You can always obtain more information at the number 00 32 3 292 92 90.

 Any transportation costs shall always be borne by the customer, unless agreed otherwise

in writing.

 At the same time, no claim can be made on the warranty if the damage of the device is the

result of negligent maintenance or overload.

 Definitely excluded from the warranty is damage resulting from fluid permeation, excessive

dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate

usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not

following the instructions given in the manual), inexpert assembly, lightning strike,

erroneus net voltage. This list is not exhaustive.

 Acceptance of claims under warranty can never lead to the prolongation of the warranty

period nor commencement of a new warranty period in case of a device replacement.

 Devices or parts which are replaced under the warranty therefore remain the property of

Varo NV.

 We reserve the right to reject a claim whenever the purchase cannot be verified or when it

is clear that the product has not been properly maintained. (Clean ventilation slots, carbon

brushes serviced regularly, etc.).

 Your purchase receipt must be kept as proof of date of purchase.

 Your appliance must be returned undismantled to your dealer in an acceptably clean state,

(in its original blow-moulded case if applicable to the unit), accompanied by proof of

purchase.

21 ENVIRONMENT

Should your appliance need replacement after extended use, do not dispose of it with the

household refuse, but in an environmentally safe way.

Please dispose of used motor oil in a manner that protects the environment. We suggest you

take it in a sealed container to your local service station for recycling. Do not throw it into the

refuse or pour it on the ground.

POWXG7216 EN

22 DECLARATION OF CONFORMITY

VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that

product: Cultivator

rade mark: POWERplus

model: POWXG7216

is in conformity with the essential requirements and other relevant provisions of the applicable

European Directives, based on the application of European harmonized standards. Any

unauthorized modification of the apparatus voids this declaration.

European Directives (including, if applicable, their amendments up to the date of signature);

2006/42/EC

2004/108/EC

2000/14/EC Annex V LwA 96dB(A) / 100dB(A)

European harmonized standards (including, if applicable, their amendments up to the date of

signature);

EN 709 : 1997 - A4 : 2009

EN ISO 14982 : 2009

Keeper of the Technical Documentation : Philippe Vankerkhove, VARO – Vic. Van Rompuy

N.V.

The undersigned acts on behalf of the company CEO,

Philippe Vankerkhove

Certification Manager

09/03/2015

Kan men met deze cultivator rijden ZONDER dat de messen draaien ? ( gevaar ) Gesteld op 16-9-2021 om 10:27
Reageer op deze vraag Misbruik melden
- Neen de messen draaien altijd wanneer de motor de wielen aandrijft Geantwoord op 8-10-2023 om 15:57
  Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWXG7216 bij:

nieuwe vragen en antwoorden
nieuwe handleidingen

U ontvangt een email met instructies om u voor één of beide opties in te schrijven.

Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWXG7216 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,46 mb groot.

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Powerplus POWXG7216

Powerplus POWXG7216 Gebruiksaanwijzing - Nederlands - 15 pagina's

Powerplus POWXG7216 Gebruiksaanwijzing - Deutsch - 16 pagina's

Powerplus POWXG7216 Gebruiksaanwijzing - Français - 16 pagina's

Powerplus POWXG7216 Aanvulling / aanpassing - Alle talen - 7 pagina's

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.

Powerplus POWXG7216 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Powerplus POWXG7216

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info

Powerplus POWXG7216 Handleiding

Hulp nodig? Stel uw vraag in het forum

Forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Powerplus POWXG7216

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info