POWXG72010 EN
Copyright © 2023 VARO P a g e | 6 www.varo.com
▪ If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust related
hazards.
5.4 Power tool use and care
▪ Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
▪ Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
▪ Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
▪ Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
▪ Maintain power tools. Check for misalignment or sticking of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
▪ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
▪ Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.
5.5 Service
▪ Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
6 ADDITIONAL SAFETY WARNINGS FOR TILLERS
6.1 Before operation
▪ Before use, all foreign bodies must be removed from the lawn, also pay attention to
foreign bodies during the operation.
▪ Only work in daylight or sufficiently good artificial light.
▪ Wear eye protection and face or dust mask if operating in dusty conditions.
▪ Dress properly. Wear the following clothing while using the application:
− Use of rubber gloves and substantial footwear is recommended.
− Wear protective hair covering to contain long hair.
− Avoid wearing loose clothing or jewellery that could get caught in the rotating tines.
6.2 Proper use
The user is responsible for third parties while working with the appliance.
▪ Do not operate the application near underground electric cables, telephone lines, pipes or
hoses.
▪ Before inserting the plug in the mains socket, make sure that the socket ratings are correct
and correspond to those indicated on the rating label on the appliance.
▪ The use of the appliance is only permitted if the safety distance provided by the guide bar
is complied with.
▪ Do not operate the application on a slope that is too steep for safe operation. When on
slopes, slow down and make sure you have good footing.
▪ Before starting the application, make sure tines are not touching foreign objects and must
be completely free to move.
▪ Grip guide bar firmly with both hands. Never operate the application with one hand.
