582051
8
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
POWXG2061 EN
Copyright © 2015 VARO P a g e | 8 www.varo.com
10 OPERATING INSTRUCTIONS
10.1 Prepare the machine
10.1.1 Assembling the Front handle
Fit the front handle absorber (A) on the rear tube (C). While aligning the hole (B) on the front
handle absorberthe position pin (F) on the barrier (E) and one position hole (D) of three on
the rear handle, fit the barrier on the rear handle and insert the position pin into the position
hole on the rear handle. Make sure the barrier is on the left side of the machine. (Fig. 8)
Push down the front handle (G), and then turn four screws (H) clockwise to tighten the front
handle securely. (Fig. 9)
10.1.2 Connecting the tube (Fig. 10)
Align the hole (A1) on the front tube (A) and the lock pin (B). Then, Pull out the Lock pin, and
while inserting the front tube in the connector (D) to the end. After loosened the lock pin, it will
return to its original position automatically, and insert into the hole on the front tube.
Make sure the front tube can’t be rotated after the lock pin came back to its original position.
Turn the lock knob (C) clockwise to tighten the front tube securely.
10.1.3 Fitting blades
When fitting the cutting attachment it is extremely important that the raised
section on the top clamping plate/support flange engages correctly in the
centre hole of the cutting attachment. If the cutting attachment is fitted
incorrectly it can result in serious and/or fatal personal injury.
Never use a cutting attachment without an approved guard. See the chapter
on Technical data. If an incorrect or faulty guard is fitted this can cause
serious personal injury.
If a grass blade are to be used the machine must be equipped with the correct handlebar,
blade guard and harness.
10.1.4 Fitting cutting head (Hedge trimmer)
Fit the cutting head (B) on the shaft tube (A) so that the screw hole on the cutting head is
aligned with the position hole (A1) on the shaft tube as shown. Then, tighten the lock screw (D)
and the position screw (C) securely. (Fig. 11)
Changing the hedge trimmer angle
Press the safety lever (E). Then press the lock lever (F), at the same time hold the grip (G)
and turn the cutting head to a desired angle (α). (Fig. 12)
10.1.5 Adjusting the harness (Fig. 13)
WARNING! When using the machine it must always be hooked securely to
the harness. Otherwise you will be unable to control the brush cutter safely
and this can result in injury to yourself or others. Never use a harness with
a defective quick release.
Single shoulder harness: Put on the harness. Hook the machine onto the harness support
hook. Adjust the length of the harness so that the support hook is roughly level with your right
hip.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWXG2061 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWXG2061 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Powerplus POWXG2061

Powerplus POWXG2061 Gebruiksaanwijzing - Nederlands - 17 pagina's

Powerplus POWXG2061 Gebruiksaanwijzing - Deutsch - 17 pagina's

Powerplus POWXG2061 Gebruiksaanwijzing - Français - 17 pagina's

Powerplus POWXG2061 Aanvulling / aanpassing - Alle talen - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info