POWXB20030 EN
Copyright © 2021 VARO P a g e | 10 www.varo.com
12 USE
12.1 Grinding Hold the handle (3) and auxiliary handle (6) firmly and
switch on. Avoid blocking the ventilation slots with your
hand, as this may cause the grinder to overheat. Let the
disc reach full speed. Apply the grinder to the item.
Maximum effect is achieved when the grinder is held at
an angle of 15-30° in relation to the item. Move the
grinder gently along the item. Give the grinder time to
work. It is rarely necessary to press the disc hard against
the surface to be worked. Sparks can occur in the motor compartment during use. This is
normal and does not mean the grinder is defective. Switch off the grinder after use.
13 CLEANING AND MAINTENANCE
13.1 Cleaning
▪ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪ Regularly clean the machine housing with a soft cloth, preferably after each use.
▪ Keep the ventilation slots free from dust and dirt.
▪ If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
14 TECHNICAL DETAILS
