POWX1704 EN
Copyright © 2018 VARO P a g e | 9 www.varo.com
This application allows for a simple and accurate inflation of tires. The manometer (6) is used to
check the tire pressure. Thanks to the integrated release valve (7) it is possible to reduce the
tire pressure if it is too high.
ATTENTION! Please note, the manometer (6) is not calibrated! After
inflation, always check the tire pressure immediately, for example, at a
petrol station.
Not suitable for inflating automotive tires
▪ Ensure that the ON/OFF switch (1) is set to "O".
▪ Press the lever quick coupler (9) downwards to attach it.
▪ Place the lever quick coupler (9) onto the valve and then release the lever.
▪ Insert the mains plug (4) of the compressor into a mains power socket.
▪ Switch the ON/OFF switch (1) to "I". The integrated control lamp lights up.
▪ Read the air pressure from the manometer (6).
▪ Switch the ON/OFF switchto (1) "O" as soon as the correct or permissible air pressure has
been reached. The integrated control lamp goes out.
▪ Press down the lever quick coupler (9) and pull it off the valve.
▪ Remove the mains plug (4) from the mains power socket.
6.3.2 Using the valve adapter (13)
Sclaverand valve, race valve
Dunlop valve, bicycle valve
Area of use:
The valve adapter (13) facilitates easy inflation of bicycle tires.
▪ Use the valve adapter (13) to pump to the valves shown above.
▪ Connect the valve adapter (13) into the lever quick coupler (9) and then release it.
▪ Start by pressing the valve adapter (13) onto the valve.
▪ Inflate as described above.
