POWX13700 EN
Copyright © 2020 VARO P a g e | 4 www.varo.com
▪ If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
5.4 Power tool use and care
▪ Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
▪ Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
▪ Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
▪ Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
▪ Maintenance. Check for misalignment or jammed moving parts, breakages or any other
feature that might affect the operation of the power tool. If it is damaged, the power tool
must be repaired. Many accidents are caused by using poorly maintained power tools.
▪ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
▪ Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
▪ Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 SPECIAL SAFETY INSTRUCTIONS FOR ELECTRIC STAPLERS
▪ Before inserting staples or nails the power plug should always be removed from the
socket.
▪ Never point the machine at persons or animals.
▪ Only use staples or nails which are suitable for the machine.
▪ Before using the machine, ensure that the safety device is operating properly.
▪ Never block the safety device.
▪ Switch the machine off when you take a break and when the work is completed.
▪ Wear ear protectors.
▪ Do not activate the tool unless the tool is placed firmly against the workpiece. If the tool is
not in contact with the workpiece, the fastener may be deflected away from your target.
▪ Do not use the tacker for fastening electrical cables. It is not designed for electric cable
installation and may damage the insulation of electric cables thereby causing electric
shock or fire hazard.
7 ASSEMBLY
Warning: This nailer/stapler is NOT suited for nailing or stapling into
concrete, masonry, bricks or metal.
Warning: Do not fire if brad nails or staples are jammed in the nose (4)
section.
