675011
10
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
POWX07551T EN
Copyright © 2016 VARO P a g e | 10 www.varo.com
8.10 Mounting mitre saw stand (FIG. B)
1. Big flat washer Ø8
2. Nut M6
3. Foot stand (down)
4. Foot stand (upper)
5. Side plate of foot stand (down)
6. Side plate (long) of foot stand (upper)
7. Side plate (short) of foot stand
(upper)
8. Cross arm of foot stand (down)
9. Blot M6x10
10. Screw M8x50
11. Foot pad
12. Nut M8
8.11 Removing and installing the blade (Fig. 11, 12, 13)
WARNING! Only use a 7-1/4 in. diameter blade. To avoid injury from an
accidental start, make sure the switch is in the OFF position and the plug is
not connected to the power source outlet.
8.11.1 Removing blade
Unplug the saw from the outlet.
Allow the mitre saw cutting head to rise to the upright position. Raise the lower blade
guard (1) to the up position.
Loosen the cover plate screw (2) with a Phillips screwdriver.
NOTE: Do not remove this screw.
Rotate the cover plate (3) upward to expose the arbor bolt (4).
Place the blade wrench over the arbor bolt.
Locate the arbor lock button (5) on the back of the motor, below the mitre saw switch
handle. (Fig. 12)
Press the arbor lock button, holding it in firmly while turning the blade wrench clockwise.
The arbor lock will engage after turning the wrench. Continue to hold the arbor lock button
to keep it engaged, while turning the wrench clockwise to loosen the arbor bolt.
Remove the arbor bolt (4), the blade collar (6) and the blade (7). Do not remove the inner
blade collar. (Fig. 13)
NOTE: Pay attention to the pieces removed, noting their position and
direction they face. Wipe the blade collar clean of any sawdust before
installing a new blade.
8.11.2 Installing blade
Unplug the mitre saw before changing/installing the blade.
Install a 7-1/4 in. blade with a 5/8 in. arbor, making sure the rotation arrow on the blade
matches the clockwise rotation arrow on the upper guard.
Place the blade collar (6) against the blade and on the arbor. Thread the arbor bolt (4)
onto the arbor (Fig. 13) in a counterclockwise direction.
IMPORTANT: Make sure the flats of the blade collars are engaged with the
flats on the arbor shaft. Also, the flat side of the blade collar must be placed
against the blade.
Place the blade wrench on the arbor bolt.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX07551T bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX07551T in de taal/talen: Engels als bijlage per email.

De handleiding is 0,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Powerplus POWX07551T

Powerplus POWX07551T Gebruiksaanwijzing - Nederlands - 21 pagina's

Powerplus POWX07551T Gebruiksaanwijzing - Deutsch - 21 pagina's

Powerplus POWX07551T Gebruiksaanwijzing - Français - 21 pagina's

Powerplus POWX07551T Aanvulling / aanpassing - Alle talen - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info