POWX0479 EN
Copyright © 2019 VARO P a g e | 9 www.varo.com
NOTE: Ensure that the sandpaper you are using is suited to the task, Overly
coarse grit paper may remove material too quickly to control. While overly
fine grit paper may clog too often and not shape down the surface.
CAUTION: Take care to avoid sharp projections and nails, etc. This will wipe
out the sandpaper and probably damage the sponge pad as well.
10 CLEANING AND MAINTENANCE
10.1 Keep tool clean
Periodically blow out all air passages with dry compressed air. All plastic parts should be
cleaned with a soft damp cloth. NEVER use solvents to clean plastic pats. They could possibly
dissolve or otherwise damage the material.
Wear safety glasses while using compressed air.
Clean the vacuum swivel connector as too much dust will keep it from turning freely.
11 TECHNICAL DETAILS