582285
1
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
POWX0030LI EN
Copyright © 2014 VARO P a g e | 1 www.varo.com
1 APPLICATION ................................................................................ 2
2 DESCRIPTION (FIG A) ................................................................... 2
3 PACKAGE CONTENT LIST ............................................................ 2
4 SYMBOLS ....................................................................................... 2
5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 3
5.1 Working area .......................................................................................................... 3
5.2 Electrical safety ..................................................................................................... 3
5.3 Personal safety ...................................................................................................... 3
5.4 Power tool use and care ........................................................................................ 4
5.5 Service .................................................................................................................... 4
6 MACHINE-SPECIFIC SAFETY WARNINGS .................................. 4
7 OPERATION.................................................................................... 5
7.1 Charging procedure............................................................................................... 5
7.2 Inserting and extracting bits ................................................................................. 5
7.3 On/Off trigger ......................................................................................................... 5
7.4 Changing the angle of the tool .............................................................................. 5
7.5 LED work-light ....................................................................................................... 6
7.6 The torch ................................................................................................................ 6
7.7 Screw insertion ...................................................................................................... 6
7.8 Screw removal ....................................................................................................... 6
8 CLEANING AND MAINTENANCE ................................................. 6
8.1 Cleaning ................................................................................................................. 6
8.2 Maintenance ........................................................................................................... 6
9 TECHNICAL DETAILS .................................................................... 6
10 NOISE .............................................................................................. 7
11 WARRANTY .................................................................................... 7
12 ENVIRONMENT .............................................................................. 7
13 DECLARATION OF CONFORMITY ............................................... 8
POWX0030LI EN
Copyright © 2014 VARO P a g e | 2 www.varo.com
CORDLESS SCREW DRIVER 3.6V
POWX0030LI
1 APPLICATION
The power tool is intended for driving and drilling through wood and plastics
It is not designed for professional use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG A)
1. Bit holder (chuck)
2. Charging indicator
3. Charging socket
4. Forward/reverse button
5. Operating switch
6. Working light
7. Release button for change tool’s
angle
8. Adapter
9. Charger plug
10. Torch
11. Torch switch
3 PACKAGE CONTENT LIST
Remove all packaging materials.
Remove remaining packing and package inserts (if included).
Check that the package contents are complete.
Check the appliance, the power cord, the power plug and all accessories for
transportation damage.
Keep the packing materials as far as possible till the end of the warranty period. Dispose
it into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
1 x Cordless screw driver
1 x Charger
1 x Manual
1 x magnetic bit holder 60mm
54 x 25mm bits (PZ/PH/SL/Hex/Torx)
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal
injury or damage to the
tool.
In accordance with essential
requirements of the European
directive(s)
Read manual before use
POWX0030LI EN
Copyright © 2014 VARO P a g e | 3 www.varo.com
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
for future reference. The term "power tool" in the safety warnings refers to your mains-
operated (corded) power tool or battery- operated (cordless) power tool.
5.1 Working area
Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
Keep children and bystanders at a distance when operating a power tool. Distractions can
cause you to lose control of it.
5.2 Electrical safety
Always check that the power supply corresponds to the voltage on the rating plate.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
adapter plugs with earthed power tools. Unmodified plugs and matching outlets will
reduce the risk of an electric shock.
Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and
refrigerators. There is an increased risk of an electric shock if your body is earthed.
Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it
will increase the risk of an electric shock.
Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of an electric shock.
When operating a power tool outdoors, use an extension cable suitable for outdoor use.
Using a cord suitable for outdoor use reduces the risk of an electric shock.
If operating a power tool in a damp location is unavoidable, use a power supply protected
by a residual current device (RCD). Using an RCD reduces the risk of an electric shock.
5.3 Personal safety
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention when operating a power tool may result in serious
personal injury.
Use safety equipment. Always wear eye protection. Using safety equipment such as a
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed
will reduce the risk of personal injury.
Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
Remove any adjusting keys or spanners before turning on the power tool. A spanner or
key left attached to a rotating part of the power tool may result in personal injury.
Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable
you retain control over the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
POWX0030LI EN
Copyright © 2014 VARO P a g e | 4 www.varo.com
5.4 Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A power tool with a
broken switch is dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or jammed moving parts, breakages or any
other feature that might affect the operation of the power tool. If it is damaged, the power
tool must be repaired. Many accidents are caused by using poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 MACHINE-SPECIFIC SAFETY WARNINGS
Hold power tool by insulated gripping surfaces, when performing an operation where the
fastener may contact hidden wiring. Fasteners contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the operator an electric shock.
Protect the battery charger from rain and moisture. The penetration of water in a battery
charger increases the risk of electric shock.
Recharge only with the charger specified by the manufacturer. A charger that is suitable
for one type of battery, it may create a risk of fire when used with another battery.
Do not charge other batteries. The battery charger is suitable only for charging our lithium
ion batteries within the listed voltage range. Otherwise there is danger of fire and
explosion.
Keep the battery charger clean. Contamination may cause the danger of electric shock.
Check the battery charger, cable and plug each time before using. Do not use the battery
charger when defects are detected. Do not open the battery charger yourself and have it
repaired only by qualified personnel using original spare parts. Damaged battery chargers,
cables and plugs increase the risk of electric shock.
Do not operate the battery charger on easily inflammable surfaces (e. g. paper, textiles,
etc.) or in combustible environments. There is danger of fire due to the heating of the
battery charger during charging.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or burns.
Do not open the battery yourself. There is danger of a short circuit.
Protect the battery against heat, e.g., including against continuous sun irradiation and fire.
There is a danger of explosion.
Do not short-circuit the battery. There is a danger of explosion.
POWX0030LI EN
Copyright © 2014 VARO P a g e | 5 www.varo.com
In case of damage and improper use of the battery, vapors may be emitted. In case of
complaints, provide for fresh air and consult a physician. The vapors can irritate the
respiratory system.
7 OPERATION
7.1 Charging procedure
The battery charger supplied matches to the battery installed in the machine. Do not use other
battery chargers.
The Li-ion battery is protected against deep discharging. When the battery is empty, the
machine is switched off by means of a protective circuit: The bit holder no longer moves.
If the On/Off switch is subject to continued use, the battery can be
damaged.
The charging process starts as soon as the mains plug of the battery charger is inserted in the
socket and the machine is then connected to the battery charger.
The battery charge indicator lights up red to indicate the charging procedure. When the battery
is fully charged, the red light will switch off. Unplug the charger plug from the main socket, the
screwdriver is ready to use.
During the charging procedure, the handle of the machine warms up. This
is normal.
Do not use the machine during the charging procedure.
7.2 Inserting and extracting bits
Important! Always turn off the switch before you change the screw bit to avoid unintentional
starting of the machine. When the machine is completely stopped, insert or extract the screw
bit.
Only use tool bits which can be securely fastened in the chuck and for
which the bits has been designed.
Before using the machine check whether the screw-bit is inserted correctly.
Avoid over-tightening screws, otherwise the screw head may be damaged
or stripping of the threads may occur.
7.3 On/Off trigger
Use the On/Off trigger to start the machine and keep holding it for continuous operation.
The rotation speed can be varied by depressing the On/Off trigger. The more the trigger is
depressed, the faster the rotation speed is.
To switch the machine off, release the On/Off trigger
7.4 Changing the angle of the tool
The tool’s angle can be changed by pressing/pushing the release button and turn the handle
clockwise or counter-clockwise.
To change the tool’s angle, stop the machine and using the button.
Do not change the angle of the tool, when it is operating!
POWX0030LI EN
Copyright © 2014 VARO P a g e | 6 www.varo.com
7.5 LED work-light
Pushing the operating button will turn on the LED work-light.
Leaving the operating button will switch off the LED work-light.
7.6 The torch
There is a torch in the end of the machine. The torch produces a light beam that emerges
from the lamp head (10).
To start the torch, push the switch (11) to “ON” position
To turn off, push the switch (11) to “OFF” position)
7.7 Screw insertion
Set the direction of rotation of the screwdriver to the clockwise direction. Insert the screw-bit
into the slot in the head of the screw. Hold the screw bit perpendicular to the head of the
screw, otherwise the screw or the screw head may be damaged. Press the screw bit against
the screw with a constant pressure while driving in the screw.
When the screw is completely screwed in, hold the machine firmly and
release the On/Off trigger, otherwise the screw or the screw head may be
damaged. If the On/Off trigger is not released immediately a high torque
could also damage the screw-bit or the screwdriver.
7.8 Screw removal
Set the direction of rotation of the screwdriver to the anticlockwise direction. Insert the screw-
bit into the slot in the head of the screw. Hold the screw-bit perpendicular to the head of the
screw, otherwise the screw or the screw head may be damaged. Press the screw bit against
the screw with a constant pressure while removing the screw.
8 CLEANING AND MAINTENANCE
8.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
8.2 Maintenance
Attention! Always switch off the screwdriver and lock the switch in the OFF position before
carrying out any work on the machine.
9 TECHNICAL DETAILS
Model nr.
Rated voltage
No load speed
Battery capacity
Charging time
POWX0030LI EN
Copyright © 2014 VARO P a g e | 7 www.varo.com
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
61 dB(A)
Acoustic power level LwA
72 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
0,22 m/s²
K =1,5 m/s²
11 WARRANTY
This product is warranted for a 36-month period effective from the date of purchase by the
first user.
This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
Repairs may only be carried out by an authorized customer service centre for Powerplus
tools.
You can always obtain more information at the number 00 32 3 292 92 90.
Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneous net voltage. This list is not exhaustive.
Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.
Devices or parts which are replaced under the warranty therefore remain the property of
Varo NV.
We reserve the right to reject a claim whenever the purchase cannot be verified or when it
is clear that the product has not been properly maintained. (Clean ventilation slots, carbon
brushes serviced regularly, etc.).
Your purchase receipt must be kept as proof of date of purchase.
Your appliance must be returned undismantled to your dealer in an acceptably clean state,
(in its original blow-molded case if applicable to the unit), accompanied by proof of
purchase.
Your tool must be charged at least 1x per month to ensure optimal operation of this tool.
12 ENVIRONMENT
Should your appliance need replacement after extended use, do not dispose of it
with the household refuse, but in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal
household rubbish. Please recycle where recycle facilities exist. Check with your
Local Authority or retailer for recycling advice.
POWX0030LI EN
Copyright © 2014 VARO P a g e | 8 www.varo.com
13 DECLARATION OF CONFORMITY
VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,
Product: Cordless screw driver
Trade mark: POWERplus
Model: POWX0030LI
is in conformity with the essential requirements and other relevant provisions of the applicable
European Directives, based on the application of European harmonized standards. Any
unauthorized modification of the apparatus voids this declaration.
European Directives (including, if applicable, their amendments up to the date of signature);
2011/65/EU
2004/108/EC
2006/42/EC
European harmonized standards (including, if applicable, their amendments up to the date of
signature);
EN60745-1 : 2009
EN60745-2-2 : 2010
EN55014-1 : 2006
EN55014-2 : 1997
Keeper of the Technical Documentation : Philippe Vankerkhove, VARO Vic. Van Rompuy
N.V.
The undersigned acts on behalf of the company CEO,
Hugo Cuypers
Regulatory Affairs Compliance Manager
Date: 17/12/2013
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX0030LI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX0030LI in de taal/talen: Engels als bijlage per email.

De handleiding is 0,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Powerplus POWX0030LI

Powerplus POWX0030LI Gebruiksaanwijzing - Nederlands - 9 pagina's

Powerplus POWX0030LI Gebruiksaanwijzing - Deutsch - 9 pagina's

Powerplus POWX0030LI Gebruiksaanwijzing - Français - 9 pagina's

Powerplus POWX0030LI Aanvulling / aanpassing - Alle talen - 48 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info