676147
1
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
POWP2050 EN
Copyright © 2018 VARO P a g e | 1 www.varo.com
1 APPLICATION ...................................................................................... 2
2 DESCRIPTION (FIG. A) ....................................................................... 2
3 PACKAGE CONTENT LIST ................................................................. 2
4 SYMBOLS ............................................................................................ 2
5 GENERAL POWER TOOL SAFETY WARNINGS .............................. 2
5.1 Work area ................................................................................................................ 3
5.2 Electrical safety ....................................................................................................... 3
5.3 Personal safety ....................................................................................................... 3
5.4 Power tool use and care ......................................................................................... 3
5.5 Service ..................................................................................................................... 4
6 ADDITIONAL SAFETY-HINTS FOR IMPACT-DRILL: ........................ 4
7 OPERATION ......................................................................................... 5
7.1 Switching on/off (Fig. 1) .......................................................................................... 5
7.2 Forward/reverse lever (Fig. 2) ................................................................................ 5
7.3 Variable speed (Fig. 3) ............................................................................................ 5
7.4 Two-speed selector (Fig. 4) .................................................................................... 5
7.5 Drill or impact mode selector (Fig. 5)..................................................................... 5
7.6 For proper operations ............................................................................................. 5
8 MAINTENANCE ................................................................................... 6
9 TECHNICAL DATA .............................................................................. 6
10 NOISE ................................................................................................... 6
11 ENVIRONMENT ................................................................................... 6
12 DECLARATION OF CONFORMITY .................................................... 7
POWP2050 EN
Copyright © 2018 VARO P a g e | 2 www.varo.com
IMPACT DRILL 1050W
POWP2050
1 APPLICATION
The power tool is intended for driving and drilling through wood, metal, plastics and masonry.
It is not designed for commercial use.
WARNING! Please read and understand this operating manual before use
and keep it for your future reference. Your power tool should only be passed
on with these instructions.
2 DESCRIPTION (FIG. A)
1. Metal keyless chuck with auto lock
2. Depth stop
3. Additional handle
4. Selector button; drill/hammer
5. 1st gear / 2nd gear selector switch
6. Selector button: Clockwise/anti-
clockwise
7. Speed control
8. Locking button
9. On/Off switch
3 PACKAGE CONTENT LIST
Remove all packing materials.
Remove remaining packaging and transit supports (if existing).
Check the completeness of the packing content.
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with plastic
bags! Danger of suffocation!
1 x impact drill
1 x depth stop
1 x additional handle
1 x manual
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Denotes risk of personal injury or
damage to the tool.
In accordance with essential
requirements of the European
directive(s).
Read manual before use.
"Class II - The machine is
double insulated; Earthing
wire is therefore not
necessary.
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to follow all warnings and instructions
may result in electric shock, fire and/or serious injury. Save all warnings and instructions for
future reference. The term "power tool" in the warnings refers to your mains operated (corded)
power tool or battery operated (cordless) power tool.
POWP2050 EN
Copyright © 2018 VARO P a g e | 3 www.varo.com
5.1 Work area
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
5.2 Electrical safety
Always check that the power supply corresponds to the voltage on the rating
plate.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
5.3 Personal safety
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious
personal injury.
Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used whenever conditions require
will reduce personal injuries.
Avoid accidental starting. Ensure the switch is in the off position before plugging in.
Carrying power tools with your finger on the switch or plugging in power tools that have
the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust related
hazards.
5.4 Power tool use and care
Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
POWP2050 EN
Copyright © 2018 VARO P a g e | 4 www.varo.com
Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
Maintain power tools. Check for misalignment or sticking of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.
5.5 Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
6 ADDITIONAL SAFETY-HINTS FOR IMPACT-DRILL:
Do not use near steams or inflammable liquids.
Only use sharp bits and suitable screwing bits.
Remove the plug from the socket for all adjusting and cleaning work.
Protect the mains cable against any damage. Oil and acids can damage the cable.
Do not carry the device by the mains cable.
Do not remove the plug from the socket by puffing the mains cable.
Make sure before inserting the plug that the operating switch is not locked.
When using a cable drum uncoil the cable completely. Cross-section of wire at least 1,5
mm2.
Do not overload machine.
Secure all work pieces to be processed sufficiently.
Do not allow children to have access,
Make sure you have a secure stand on ladders or scaffolding when using the drill
freehand.
Localize lines with a line detector in walls where power, water or gas lines are laid
invisibly.
Wear protection goggles and use a dust mask for dust-producing work.
Always arrange for a qualified electrician to carry out repairs
Use only original replacement parts
The level of noise at the workplace may exceed 85 dB (A). In this case you will need to
introduce noise protection measures for the user. The noise generated by this electric tool
was measured in accordance with EN 50114-1.
Always use ear-protection, when machine is in use!
Recommended nominal operating-time: approx. 20 minutes under
permanent load.
Rest after permanent operation: approx. 5-10 minutes.
POWP2050 EN
Copyright © 2018 VARO P a g e | 5 www.varo.com
7 OPERATION
WARNING: Prior to assembly and adjustment always pull out the power plug
from the mains socket.
7.1 Switching on/off (Fig. 1)
Plug the cord set into power socket.
Start the tool by squeezing the ON/OFF switch (9).
Release the ON/OFF switch to stop the tool.
If you press the lock-on button (8) while the ON/OFF switch is depressed, the ON/OFF
switch is kept in the operating position.
To release the ON/OFF switch (9) and turn the tool off.
7.2 Forward/reverse lever (Fig. 2)
The forward/reverse lever (6) is to determine the rotation direction of the chuck.
To select forward rotation, release the ON/OFF switch (9) and push the forward/reverse
lever to right (R) side of the tool. To select reverse rotation, push the lever to left (L) side
of the tool.
NOTE: When changing the position of the lever, be sure the ON/OFF switch
is released and the motor is stationary.
7.3 Variable speed (Fig. 3)
This tool has a speed control dial (7) that delivers higher speed by turning to the “+” direction,
and delivers lower speed by turning to “-”direction.
7.4 Two-speed selector (Fig. 4)
Mark “1”is Low speed position
Mark “2” is High speed position.
The drill has a two-speed gear train designed for drilling at (1) or (2) speed. A gear selector is
located on the left of the drill to select either low or high speed. When you select low speed
range, the speed will decrease but will provide more power and torque. When using drill in the
high speed range, speed will increase but will provide less power and torque. Use low speed
for high power and torque application and high speed for fast drilling applications.
NEVER adjust this two-speed selector (5) whilst the drill is running. Always
let it come to a complete stop first.
7.5 Drill or impact mode selector (Fig. 5)
The drill and impact mode selector is on the top of this impact drill.
Push the button of drill /impact mode selector (4) to the to select the impact mode of
action.
Push the button of drill/impact mode selector to the drill position to select the drill mode
of action.
7.6 For proper operations
Hold the drill with your first two fingers on the ON/OFF switch (9).
Use the auxiliary handle subassembly (3) where possible to gain extra control and to
prevent fatigue.
For wood, use twist drill bits, spade bits power auger bits, or hole saw.
For metal use high seed steel twist drill bits or hole saws.
POWP2050 EN
Copyright © 2018 VARO P a g e | 6 www.varo.com
For masonry, such as brick, cinder block, cemetery, etc, use carbide tipped drill bits.
Use enough pressure to keep the bit biting but do not push so hard that do not stall the
motor or damage the bit.
Always apply pressure in a straight line with the bit.
Hold the drill firmly to control the twisting of the drill.
WarningIf the drill stalls, release the trigger immediately, remove the drill
from the work and determine the cause of the stalling. Do not click the switch
on and off as this can damage the motor.
To minimize the chance of stalling and breaking through the material, reduce the pressure
on the drill and ease the bit through the last part of the hole.
Keep the motor running when pulling the bit back out of a drilled hole. This will help
prevent jamming.
8 MAINTENANCE
Do not attempt to make any adjustments while the tool is in operation.
Clean out any accumulated dust with a brush or dry cloth.
Do not allow petroleum-based products to come into contact with plastic parts as they contain
chemicals, which could damage, weaken or destroy plastic.
9 TECHNICAL DATA
Mains voltage
Power input
No load speed
Chuck capacity
Double isolation
Impact rate
Max. drill capacity
Wood
Steel
Concrete
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
95 dB(A)
Acoustic power level LwA
106 dB(A)
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).
aw (Vibration)
9 m/s²
K = 1,5 m/s²
11 ENVIRONMENT
Should your appliance need replacement after extended use, do not discard it with
the household rubbish but dispose of it in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal
household rubbish. Please recycle where recycle facilities exist. Check with your
Local Authority or retailer for recycling advice.
POWP2050 EN
Copyright © 2018 VARO P a g e | 7 www.varo.com
12 DECLARATION OF CONFORMITY
VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,
Product: Impact Drill
Trade mark: PowerPlus
Model: POWP20500
is in conformity with the essential requirements and other relevant provisions of the applicable
European Directives, based on the application of European harmonized standards. Any
unauthorized modification of the apparatus voids this declaration.
European Directives (including, if applicable, their amendments up to the date of signature);
2011/65/EU
2014/30/EC
2006/42/EC
European harmonized standards (including, if applicable, their amendments up to the date of
signature);
EN60745-1: 2009
EN60745-2-1: 2010
EN55014-1: 2006
EN55014-2: 2015
EN61000-3-2: 2014
EN61000-3-3: 2013
Keeper of the Technical Documentation : Philippe Vankerkhove, VARO Vic. Van Rompuy
N.V.
The undersigned acts on behalf of the company CEO,,
Philippe Vankerkhove
Regulatory Affairs Compliance Manager
Date: 14/09/17
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Powerplus-POWP2050

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWP2050 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWP2050 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Powerplus POWP2050

Powerplus POWP2050 Gebruiksaanwijzing - Nederlands - 8 pagina's

Powerplus POWP2050 Gebruiksaanwijzing - Deutsch - 8 pagina's

Powerplus POWP2050 Gebruiksaanwijzing - Français - 8 pagina's

Powerplus POWP2050 Aanvulling / aanpassing - Alle talen - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info