676333
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
POWE40030 EN
Copyright © 2017 VARO P a g e | 5 www.varo.com
Turn and loosen the adjustment knob (7) with clockwise direction.
Place the auxiliary handle in the desired position and tighten the adjustment knob firmly.
7.2 Switch action (Fig. 2)
Connect the plug to the power supply, the power-on indicator is illumed until the tool
disconnect from the power mains.
Switch the power tool on: push the ON/OFF switch button (2) forwards into the “I” position.
Switch the power tool off: push the ON/OFF switch button backwards to the “O” position.
7.3 Speed adjusting dial (Fig. 3)
This tool has a speed control dial (1) at the front.
The speed can be adjusted between 6000 rpm and 13000 rpm.
Higher speed is obtained when the speed control dial is turned into the MAX direction.
7.4 Attaching the sandpaper (Fig. 4)
To attach sanding paper, first remove all dirt or foreign matter from the sanding base plate.
Then attach the sanding paper to the sanding base plate, using the hook-and-loop system
of the sanding paper and the sanding base plate.
Make sure the perforations in the paper coincide with those on the sanding base plate, to
ensure optimal dust collection.
The sandpaper should rest flush on the base plate and must not come loose.
Select sandpaper with the correct grain size.
You can be sure to find the right sandpaper among our product range (see accessories).
WARNING: When removing the sanding paper, follow the above procedure
in reverse order.
WARNING: The sand paper must be stick firmly on sanding plate and
should not come loose.
Never use the machine for sanding magnesium work piece.
7.5 Using the dust bag (Fig. 5)
7.5.1 To install:
Insert the dust bag (4) into dust extraction port (a), rotate the dust bag anti-clockwise by hand
and lock on the correct position, make sure the dust bag is tightly fastened.
7.5.2 To remove:
When removing the dust bag, follow the above procedure in reverse order.
WARNING: Never use the machine for sanding magnesium work piece.
8 GENERAL OPERATING INSTRUCTIONS
Turn on the sander using the ON/OFF switch trigger (2).
Run the sander for a few seconds before contacting the workpiece.
Contact the workpiece with minimal pressure. If the sander is not removing enough
material, try a grittier piece of sandpaper. If you want to remove a lot of material fast, use a
belt sander.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWE40030 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWE40030 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Powerplus POWE40030

Powerplus POWE40030 Gebruiksaanwijzing - Nederlands - 9 pagina's

Powerplus POWE40030 Gebruiksaanwijzing - Deutsch - 9 pagina's

Powerplus POWE40030 Gebruiksaanwijzing - Français - 9 pagina's

Powerplus POWE40030 Aanvulling / aanpassing - Alle talen - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info