676331
8
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
POWE40010 EN
Copyright © 2017 VARO P a g e | 1 www.varo.com
1 APPLICATION ................................................................................... 2
2 DESCRIPTION (FIG. A) ..................................................................... 2
3 PACKAGE CONTENT LIST .............................................................. 2
4 SYMBOLS .......................................................................................... 3
5 GENERAL POWER TOOL SAFETY WARNINGS ............................ 3
5.1 Working area ............................................................................................................. 3
5.2 Electrical safety ......................................................................................................... 3
5.3 Personal safety ......................................................................................................... 3
5.4 Power tool use and care ........................................................................................... 4
5.5 Service ....................................................................................................................... 4
6 MACHINE-SPECIFIC SAFETY WARNINGS ..................................... 4
7 ASSEMBLY ........................................................................................ 5
7.1 Fitting the sanding sheets ........................................................................................ 5
7.1.1 Hook-and-loop system (Fig. 1) .................................................................................... 5
7.1.2 With paper clamps (4) ................................................................................................. 5
8 OPERATION ...................................................................................... 5
8.1 Switch on and off (Fig. 3) .......................................................................................... 5
8.2 Guide handle ............................................................................................................. 5
8.3 Using the dust bag (Fig. 4) ....................................................................................... 6
8.3.1 To install ..................................................................................................................... 6
8.3.2 To remove ................................................................................................................... 6
9 CLEANING AND MAINTENANCE .................................................... 6
9.1 Cleaning ..................................................................................................................... 6
10 TECHNICAL DETAILS ...................................................................... 6
11 NOISE ................................................................................................. 6
12 WARRANTY ....................................................................................... 7
13 ENVIRONMENT ................................................................................. 7
14 DECLARATION OF CONFORMITY .................................................. 8
POWE40010 EN
Copyright © 2017 VARO P a g e | 2 www.varo.com
FINISHING SANDER 180W
POWE40010
1 APPLICATION
The sander is used to sand and buff wood, plastic and similar materials. It is very important to
use the correct sandpaper! Not suitable for professional use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1. Guide handle
2. ON/OFF Switch button
3. Dust bag
4. Paper clamp
5. Hook and loop sanding plate
6. Power on LED light
7. Sanding paper
8. Dust extraction port
3 PACKAGE CONTENT LIST
Remove all packaging materials.
Remove remaining packing and package inserts (if included).
Check that the package contents are complete.
Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
Keep the packing materials as far as possible till the end of the warranty period. Dispose it
into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
1 x machine
1 x manual
5 x sandpaper (2x 80gr, 2x 120gr, 1x 240gr)
1 x dust bag
If any parts are missing or damaged, please contact your dealer.
POWE40010 EN
Copyright © 2017 VARO P a g e | 4 www.varo.com
Use safety equipment. Always wear eye protection. Using safety equipment such as a
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed
will reduce the risk of personal injury.
Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
Remove any adjusting keys or spanners before turning on the power tool. A spanner or
key left attached to a rotating part of the power tool may result in personal injury.
Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable
you retain control over the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
5.4 Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or jammed moving parts, breakages or any
other feature that might affect the operation of the power tool. If it is damaged, the power
tool must be repaired. Many accidents are caused by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 MACHINE-SPECIFIC SAFETY WARNINGS
Always wear safety-goggles and a dust-mask during your work with the finishing-sander.
Always secure the workpiece by clamps to avoid slipping away.
Always keep the holes in the baseplate clean from dust.
Observe the applicable regulations when sanding painted surfaces.
Whenever possible, use a vacuum extractor for dust collection.
Remove dust and other waste matter in an environmentally safe way.
Take special care when sanding lead based paint:
All persons entering the work area must wear a mask specially designed for protection
against lead paint dust and fumes.
Children and pregnant women must not enter the work area.
POWE40010 EN
Copyright © 2017 VARO P a g e | 6 www.varo.com
8.3 Using the dust bag (Fig. 4)
8.3.1 To install
Insert the dust bag (3) into dust extraction port, rotate the dust bag anti-clockwise by hand and
lock on the correct position, make sure the dust bag is tightly fastened.
8.3.2 To remove
When removing the dust bag, follow the above procedure in reverse order.
9 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10 TECHNICAL DETAILS
Rated Voltage
Rated Frequency
Rated Power
Rotation speed
Cable length
Sanding surface
Oscillation speed
Soft grip
Hook & loop system
Self-dust function
Power on LED light
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
73dB(A)
Acoustic power level LwA
84 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
6.5m/s²
K = 1,5 m/s²
POWE40010 EN
Copyright © 2017 VARO P a g e | 8 www.varo.com
14 DECLARATION OF CONFORMITY
VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,
Product: Finishing sander 180W
Trade mark: POWERplus
Model: POWE40010
is in conformity with the essential requirements and other relevant provisions of the applicable
European Directives, based on the application of European harmonized standards. Any
unauthorized modification of the apparatus voids this declaration.
European Directives (including, if applicable, their amendments up to the date of signature):
2011/65/EU
2006/42/EC
2014/30/EU
European harmonized standards (including, if applicable, their amendments up to the date of
signature):
EN60745-1 : 2009
EN60745-2-4 : 2009
EN55014-1 : 2006
EN55014-2 : 2015
EN61000-3-2 : 2014
EN61000-3-3 : 2013
Keeper of the Technical Documentation: Philippe Vankerkhove, VARO Vic. Van Rompuy
N.V.
The undersigned acts on behalf of the company CEO,
Philippe Vankerkhove
Regulatory Affairs Compliance Manager
23/11/16
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWE40010 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWE40010 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Powerplus POWE40010

Powerplus POWE40010 Gebruiksaanwijzing - Nederlands - 9 pagina's

Powerplus POWE40010 Gebruiksaanwijzing - Deutsch - 9 pagina's

Powerplus POWE40010 Gebruiksaanwijzing - Français - 9 pagina's

Powerplus POWE40010 Aanvulling / aanpassing - Alle talen - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info