795690

Powerplus POWE20011 Handleiding

1
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
POWE20011 EN
Copyright © 2022 VARO p a g e | 1 www.varo.com
1 INTENDED USE ............................................................................... 3
2 DESCRIPTION (FIG. A) ................................................................... 3
3 PACKAGE CONTENT LIST ............................................................. 3
4 SYMBOLS ........................................................................................ 4
5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4
5.1 Working area ........................................................................................................... 4
5.2 Electrical safety ....................................................................................................... 4
5.3 Personal safety ....................................................................................................... 5
5.4 Power tool use and care ......................................................................................... 5
5.5 Service ..................................................................................................................... 5
6 SPECIFIC SAFETY INSTRUCTIONS FOR ANGLE GRINDERS ... 6
7 OPERATION ..................................................................................... 6
7.1 Fitting the auxiliary handle (Fig. B) ........................................................................ 6
7.2 Assembly of the protective guard (Fig. A & C) ...................................................... 7
7.3 Installing / replacing the grinding wheel (Fig. A, B & D) ....................................... 7
7.4 Special attention when starting the machine ........................................................ 7
7.4.1 Switching On (Fig. E) ................................................................................................ 8
7.4.2 Switching Off (Fig. E) ................................................................................................ 8
8 OPERATION MODES ...................................................................... 8
8.1 Grinding ................................................................................................................... 8
9 FLANGE ARRANGEMENTS WHEN USING GRINDING WHEELS8
9.1 Flange arrangements when using a depressed centre or straight grinding
wheel 8
10 CLEANING AND MAINTENANCE ................................................... 9
10.1 Cleaning................................................................................................................... 9
10.2 Lubrication .............................................................................................................. 9
11 TECHNICAL DATA .......................................................................... 9
12 NOISE ............................................................................................... 9
13 SERVICE DEPARTMENT ................................................................ 9
14 STORAGE ........................................................................................ 9
15 ENVIRONMENT ............................................................................. 10
POWE20011 EN
Copyright © 2022 VARO p a g e | 2 www.varo.com
16 WARRANTY ................................................................................... 10
17 DECLARATION OF CONFORMITY .............................................. 11
POWE20011 EN
Copyright © 2022 VARO p a g e | 3 www.varo.com
ANGLE GRINDER 800 W 115 MM
POWE20011
1 INTENDED USE
This machine is developed for grinding and roughing of metal and stone. With help of the
correct accessories the machine can also be used for brushing and sanding. Not suitable for
professional use.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
2 DESCRIPTION (FIG. A)
1. Lock lever for protection guard
2. Spindle lock button
3. Main handle
4. On/Off switch
5. Air vents
6. Auxiliary handle
7. Protective guard
8. Grinding disc (not included)
9. Power On LED light
10. Direction of rotation marking
3 PACKAGE CONTENT LIST
▪ Remove all packaging materials.
▪ Remove remaining packaging and packing inserts (if included).
▪ Check that the package contents are complete.
▪ Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
▪ Keep the packaging materials as far as possible until the end of the warranty period. Then
take it to your local waste disposal system.
WARNING! Packaging materials are not toys! Children must not play with
plastic bags! There is a danger of suffocation!
1 x angle grinder
1 x auxiliary handle
1 x pin spanner
1 x instruction manual
1 x protective guard
If any parts are missing or damaged, please contact your dealer.
POWE20011 EN
Copyright © 2022 VARO p a g e | 4 www.varo.com
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal
injury or damage to the
tool.
Read manual before use.
In accordance with
essential safety standards
of applicable European
directives.
Class II - The machine is
double insulated; Earthing
wire is therefore not
necessary.
Mandatory use of eye
protection.
Wear gloves.
Important information.
Electrical products must not
be disposed with the domestic
waste.
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
for future reference. The term "power tool" in the safety warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) power tool.
5.1 Working area
▪ Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
▪ Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
▪ Keep children and bystanders at a distance when operating a power tool. Distractions can
cause you to lose control of it.
5.2 Electrical safety
Always check that the power supply corresponds to the voltage on the rating
plate.
▪ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
adapter plugs with earthed power tools. Unmodified plugs and matching outlets will
reduce the risk of a lethal electric shock.
▪ Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and
refrigerators. There is an increased risk of a lethal electric shock if your body is earthed.
▪ Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will
increase the risk of a lethal electric shock.
▪ Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of a lethal electric shock.
▪ When operating a power tool outdoors, use an extension cable suitable for outdoor use.
Using a cord suitable for outdoor use reduces the risk of a lethal electric shock.
POWE20011 EN
Copyright © 2022 VARO p a g e | 8 www.varo.com
7.4.1 Switching On (Fig. E)
▪ Connect the plug to the power supply. The power-on indicator (9) is illumed until the tool
disconnects from the power mains.
▪ Press the end of the ON/OFF switch down then slide it forwards until it locks.
▪ The machine will start.
7.4.2 Switching Off (Fig. E)
▪ Unlock the ON/OFF switch, the machine will be switched OFF. The disc will gradually
slow down and eventually stop after a few seconds.
Do not put the machine down when the disc is still turning.
In case of interruption of the mains supply the on/off switch of the tool needs
to be released and reactuated.
8 OPERATION MODES
8.1 Grinding Hold the handle (3) and auxiliary handle (6) firmly and
switch on. Avoid blocking the ventilation slots with your
hand, as this may cause the grinder to overheat. Let the
disc reach full speed. Apply the grinder to the item.
Maximum effect is achieved when the grinder is held at
an angle of 15-30° in relation to the item. Move the
grinder gently along the item. Give the grinder time to
work. It is rarely necessary to press the disc hard against
the surface to be worked. Sparks can occur in the motor compartment during use. This is
normal and does not mean the grinder is defective. Switch off the grinder after use.
9 FLANGE ARRANGEMENTS WHEN USING GRINDING WHEELS
9.1 Flange arrangements when using a depressed centre or straight grinding wheel
1 Backing flange
2 Flange nut
POWE20011 EN
Copyright © 2022 VARO p a g e | 9 www.varo.com
10 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
10.1 Cleaning
▪ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪ Regularly clean the machine housing with a soft cloth, preferably after each use.
▪ Keep the ventilation slots free from dust and dirt.
▪ If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10.2 Lubrication
The machine does not require any specific lubrication.
11 TECHNICAL DATA
230-240 V / 50 Hz
800 W
11000 min-1
Ø 115 mm
12 NOISE
Noise values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
89 dB(A)
Acoustic power level LwA
100 dB(A)
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).
aw (Vibration)
11.8 m/s²
K = 1.5 m/s²
13 SERVICE DEPARTMENT
▪ Damaged switches must be replaced by our after-sales service department.
▪ If the connecting cable (or mains plug) is damaged, it must be replaced by a special
connecting cable which is available from our service department. Replacement of the
connecting cable should only be carried out by our service department (see last page) or
by a qualified specialist (qualified electrician).
14 STORAGE
▪ Thoroughly clean the whole machine and its accessories.
▪ Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
▪ Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
▪ Don’t keep it in plastic bags to avoid humidity build-up.
POWE20011 EN
Copyright © 2022 VARO p a g e | 11 www.varo.com
17 DECLARATION OF CONFORMITY
VARO – Vic. Van Rompuy N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM,
declares that,
product: Angle grinder
trade mark: POWERplus
model: POWE20011
is in conformity with the essential requirements and other relevant provisions of the applicable
European Directives, based on the application of European harmonized standards. Any
unauthorized modification of the apparatus voids this declaration.
European Directives (including, if applicable, their amendments up to the date of signature):
2011/65/EU
2006/42/EC
2014/30/EU
European harmonized standards (including, if applicable, their amendments up to the date of
signature):
EN60745-1 : 2009
EN60745-2-3 : 2011
EN IEC 55014-1 : 2021
EN IEC 55014-2 : 2021
EN IEC 61000-3-2 : 2019
EN61000-3-3 : 2013
Keeper of the Technical Documentation: Philippe Vankerkhove, VARO – Vic. Van Rompuy
N.V.
The undersigned acts on behalf of the company CEO,
Philippe Vankerkhove
Regulatory Affairs – Compliance Manager
03/01/2022
1 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWE20011 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWE20011 in de taal/talen: Engels als bijlage per email.

De handleiding is 0.3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Powerplus POWE20011

Powerplus POWE20011 Gebruiksaanwijzing - Nederlands - 12 pagina's

Powerplus POWE20011 Gebruiksaanwijzing - Deutsch - 12 pagina's

Powerplus POWE20011 Gebruiksaanwijzing - Français - 11 pagina's

Powerplus POWE20011 Aanvulling / aanpassing - Alle talen - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info