POWDP7080 EN
Copyright © 2019 VARO NV P a g e | 8 www.varo.com
Always use a mixer bar that is suitable for the material to be mixed/stirred.
Using an unsuitable mixer bar can unnecessarily overload both the
machine and yourself.
▪ To remove the mixer bar, unscrew it from the mixer
spindle in an anticlockwise direction. The mixer bar can
become rather tight in the holder. In that case, use a spanner
to keep the holder from turning.
8.5 Switching on and off
To switch the tool on, press the switch (1), hold it down and push button (2). To switch the tool
off, release the switch (1) and button (2)
8.6 Continuous operation
Continuous operation can only be executed by continuous pressing the on/off switch (1)
8.7 Speed preselection
The speed can be preselected steplessly with the speed controller (3).
The necessary speed depends on the type of material you wish to mix; we recommend practical
testing to determine the right speed.
Level 1 min. power=SLOW
Level 6 max. power=FAST
9 MAINTENANCE AND CLEANING
9.1 Cleaning
▪ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪ Regularly clean the machine housing with a soft cloth, preferably after each use.
▪ Keep the ventilation slots free from dust and dirt.
▪ If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10 TECHNICAL DATA
