POWDP7020 EN
Copyright © 2019 VARO P a g e | 6 www.varo.com
▪ Never cut or drill holes in the inflator.
▪ Make sure the hose is free of obstructions or snags.
▪ Entangled or snarled hoses can cause loss of balance or footing and may become
damaged.
▪ Use the inflator only for its intended use. Do not alter or modify the unit from the original
design or function.
▪ Always be aware that misuse and improper handling of this inflator can cause injury to
yourself and others.
▪ Never leave an inflator unattended with the air hose attached to the item being inflated.
▪ Do not continue to use a inflator or hose that leaks air or does not function properly.
▪ Always disconnect the air supply and power supply before making adjustments, servicing
an inflator, or when an inflator is not in use.
▪ Do not attempt to pull or carry the inflator by the hoses.
▪ Always follow all safety rules recommended by the manufacturer of your inflator, in
addition to all safety rules for the inflator. Following this rule will reduce the risk of serious
personal injury.
▪ Household use only.
▪ Do not use inflator as a breathing device.
▪ Never direct a jet of compressed air toward people or animals. Take care not to blow dust
and dirt towards yourself or others. Following this rule will reduce the risk of serious injury.
▪ Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule
will reduce the risk of serious personal injury.
▪ Do not use this inflator to spray chemicals. Your lungs can be damaged by inhaling toxic
fumes.
▪ Check damaged parts. Before further use of the inflator or air tool, a guard or other part
that is damaged should be carefully checked to determine that it will operate properly and
perform its intended function.
▪ Check for alignment of moving parts, binding of moving parts, breakage of parts,
mounting, and any other conditions that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced by an authorized service center.
Following this rule will reduce the risk of shock, fire, or serious injury.
▪ Inspect tool cords periodically and, if damaged, have repaired at your nearest Authorized
Service Center.
▪ Constantly stay aware of cord location. Following this rule will reduce the risk of electric
shock or fire.
▪ Risk of bursting. Carefully monitor objects during inflation.
▪ To reduce the risk of over inflation, use a reliable pressure gauge periodically during
inflation. The pressure guage on the inflator is for reference only and is therefore not
binding for exact values.
▪ Never leave the inflator unattended during inflation.
▪ Allow pump to cool for five (5) minutes after each five (5) minutes of continuous use.
Never block the inflating or deflating outlets while operating.
▪ Save these instructions. Refer to them frequently and use them to instruct others who may
use this inflator.
▪ If you loan someone this inflator, loan them these instructions also.
7 OPERATION
7.1 Charging the battery
Connect the charger to the power outlet socket
▪ Solid green: ready to charge
▪ Flickering red: charging
▪ Solid green: charged
