POWDP4060 EN
Copyright © 2020 VARO P a g e | 5 www.varo.com
medication. A moment of inattention when operating a power tool may result in serious
personal injury.
▪ Use safety equipment. Always wear eye protection. Using safety equipment such as a
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed
will reduce the risk of personal injury.
▪ Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
▪ Remove any adjusting keys or spanners before turning on the power tool. A spanner or
key left attached to a rotating part of the power tool may result in personal injury.
▪ Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable
you retain control over the power tool in unexpected situations.
▪ Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
▪ If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
5.4 Battery tool use and care
▪ Recharge only with the charger specified by the manufacturer. A charger that is suitable
for one type of battery pack may create a risk of fire when used with another battery pack.
▪ Use power tools only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
▪ When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a fire.
▪ Under abusive conditions, liquid may be ejected from the battery; avoid contact.
▪ If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
5.5 Service
▪ Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 MACHINE-SPECIFIC SAFETY WARNINGS
▪ Use the machine only for dry sanding. Penetration of water into the machine increases the
risk of an electric shock.
▪ Keep hands away from the sawing range. Do not reach under the workpiece. Contact with
the saw blade can lead to injuries.
▪ Use suitable detectors to determine if utility lines are hidden in the work area or call the
local utility company for assistance. Contact with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explosion. Penetrating a water line causes
property damage or may cause an electric shock.
▪ When working with the machine, always hold it firmly with both hands and provide for a
secure stance. The power tool is guided more secure with both hands.
▪ Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held
more secure than by hand.
▪ Do not use the machine when the quick release lever is not tightened.
▪ Keep your workplace clean. Blends of materials are particularly dangerous. Dust from light
alloys can burn or explode.
▪ Wear protective gloves when changing application tools/accessories.
▪ Application tools/ accessories become hot after prolonged usage.
