Handleiding Powerplus POWDP35170 (pagina 10 van 13) (Engels)

795687

Verklein

Vergroot

Pagina terug

1/13

Pagina verder

  POWDP35170  EN 
Copyright © 2021 VARO  P a g e  | 1  www.varo.com 
APPLICATION ................................................................................ 3 
DESCRIPTION (FIG. A) .................................................................. 3 
PACKAGE CONTENT LIST ............................................................ 3 
SYMBOLS ....................................................................................... 3 
GENERAL POWER TOOL SAFETY WARNINGS ......................... 4 
1 Working area .......................................................................................................... 4 
2 Electrical safety ..................................................................................................... 4 
3 Personal safety ...................................................................................................... 4 
4 Power tool use and care ........................................................................................ 5 
5 Battery tool use and care ...................................................................................... 5 
6 Service .................................................................................................................... 6 
SPECIFIC SAFETY INSTRUCTIONS FOR ANGLE GRINDERS .. 6 
ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND 
CHARGERS .................................................................................... 7 
1 Batteries ................................................................................................................. 7 
2 Chargers ................................................................................................................. 7 
CHARGING AND INSERTION OR REMOVAL OF BATTERY ...... 7 
1 Charger indications (Fig. 1) ................................................................................... 7 
2 Removal / insertion of battery (Fig. 2) .................................................................. 8 
3 Battery capacity indicator (Fig. 3) ......................................................................... 8 
ASSEMBLY ..................................................................................... 8 
1 Fitting the auxiliary handle (Fig. 4) ....................................................................... 8 
2 Assembly the protective guard (Fig. 5) ................................................................ 8 
3 Replacing the grinding disc (Fig. 6-7) .................................................................. 9 
OPERATION.................................................................................... 9 
1 Switch on/off (Fig. 8).............................................................................................. 9 
1.1 Switching on ............................................................................................................ 9 
1.2 Switching off ............................................................................................................ 9 
USE ................................................................................................ 10 
1 Wrench storage (Fig. 9) ....................................................................................... 10 

  POWDP35170  EN 
Copyright © 2021 VARO  P a g e  | 2  www.varo.com 
2 Rough grinding (Fig. 10)...................................................................................... 10 
3 Cutting (Fig. 11) ................................................................................................... 10 
CLEANING AND MAINTENANCE ............................................... 11 
1 Cleaning ............................................................................................................... 11 
TECHNICAL DETAILS .................................................................. 11 
NOISE ............................................................................................ 11 
WARRANTY .................................................................................. 12 
ENVIRONMENT ............................................................................ 12 
DECLARATION OF CONFORMITY ............................................. 13 
 

POWDP35170 EN

ANGLE GRINDER 40 V BRUSHLESS (NO ACCU)

POWDP35170

1 APPLICATION

The angle grinder is designed for grinding metal and stone when using the appropriate

grinding wheel and guard. Read all safety warnings, instructions, illustrations and

specifications provided with this power tool. Do not use tool attachments for works other than

those for which they are designed for! Not suitable for professional use.

WARNING! Read this manual and general safety instructions carefully

before using the appliance, for your own safety. Your power tool should

only be passed on together with these instructions.

2 DESCRIPTION (FIG. A)

1. Gear box

2. Spindle lock button

3. Lock/on switch

4. Lock lever for protection guard

5. Wrench

6. Metal grinding guard

7. Auxiliary handle

8. Flange nut

9. Grinding disc (NOT included)

10. Charger (NOT included)

11. Battery pack with battery capacity

indicator (NOT included)

12. Battery pack release button

13. Button for battery capacity indicator

3 PACKAGE CONTENT LIST

▪ Remove all packaging materials.

▪ Remove remaining packing and package inserts (if included).

▪ Check that the package contents are complete.

▪ Check the appliance, the power cord, the power plug and all accessories for transportation

damage.

▪ Keep the packing materials as far as possible till the end of the warranty period. Dispose it

into your local waste disposal system afterwards.

WARNING: Packaging materials are not toys! Children must not play with

plastic bags! Danger of suffocation!

1 x machine

1 x manual 1 x auxiliary handle with wrench

If any parts are missing or damaged, please contact your dealer.

4 SYMBOLS

In this manual and/or on the machine the following symbols are used:

Denotes risk of personal

injury or damage to the tool.

In accordance with essential

requirements of the

European directive(s).

Read manual before use.

Class II - The machine is

double insulated; Earthing

wire is therefore not

necessary (only for charger).

POWDP35170 EN

Wear noise protection.

Ambient temperature 40 °C

max. (only for battery).

Wear eye protection.

Use battery and charger only

in closed rooms.

Wear a mask in dusty

conditions.

Do not expose charger and

battery pack to water.

Wear gloves.

Do not incinerate battery

pack or charger.

5 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and instructions. Failure to heed warnings and follow instructions

may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions

for future reference. The term "power tool" in the safety warnings refers to your mains-

operated (corded) power tool or battery- operated (cordless) power tool.

5.1 Working area

▪ Keep working area clean and well lit. Untidy and dark areas can lead to accidents.

▪ Do not operate power tools in potentially explosive surroundings, for example, in the

presence of inflammable liquids, gases or dust. Power tools create sparks which may

ignite the dust or fumes.

▪ Keep children and bystanders at a distance when operating a power tool. Distractions can

cause you to lose control of it.

5.2 Electrical safety

▪ Always check that the power supply corresponds to the voltage on the rating plate.

▪ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use

adapter plugs with earthed power tools. Unmodified plugs and matching outlets will reduce

the risk of an electric shock.

▪ Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and

refrigerators. There is an increased risk of an electric shock if your body is earthed.

▪ Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will

increase the risk of an electric shock.

▪ Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of an electric shock.

▪ When operating a power tool outdoors, use an extension cable suitable for outdoor use.

Using a cord suitable for outdoor use reduces the risk of an electric shock.

▪ If operating a power tool in a damp location is unavoidable, use a power supply protected

by a residual current device (RCD). Using an RCD reduces the risk of an electric shock.

5.3 Personal safety

▪ Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or

POWDP35170 EN

medication. A moment of inattention when operating a power tool may result in serious

personal injury.

▪ Use safety equipment. Always wear eye protection. Using safety equipment such as a

dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed

will reduce the risk of personal injury.

▪ Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.

Carrying power tools with your finger on the switch or plugging in power tools when the

switch is in the on position makes accidents more likely.

▪ Remove any adjusting keys or spanners before turning on the power tool. A spanner or

key left attached to a rotating part of the power tool may result in personal injury.

▪ Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable

you retain control over the power tool in unexpected situations.

▪ Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from the power tool. Loose clothes, jewellery or long hair can become

entangled in the moving parts.

▪ If there are devices for connecting dust extraction and collection facilities, please ensure

that they are attached and used correctly. Using such devices can reduce dust-related

hazards.

5.4 Power tool use and care

▪ Do not expect the power tool to do more than it can. Use the correct power tool for what

you want to do. A power tool will achieve better results and be safer if used in the context

for which it was designed.

▪ Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken

switch is dangerous and must be repaired.

▪ Disconnect the plug from the power source before making adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

▪ Store power tools, when not in use, out of the reach of children and do not allow people

who are not familiar with the power tool or these instructions to operate it. Power tools are

potentially dangerous in the hands of untrained users.

▪ Maintain power tools. Check for misalignment or jammed moving parts, breakages or any

other feature that might affect the operation of the power tool. If it is damaged, the power

tool must be repaired. Many accidents are caused by using poorly maintained power tools.

▪ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to jam and are easier to control.

▪ Use the power tool, accessories and cutting tools, etc., in accordance with these

instructions and in the manner intended for the particular type of power tool, taking into

account the working conditions and the work which needs to be done. Using a power tool

in ways for which it was not intended can lead to potentially hazardous situations.

5.5 Battery tool use and care

▪ Recharge only with the charger specified by the manufacturer. A charger that is suitable

for one type of battery pack may create a risk of fire when used with another battery pack.

▪ Use power tools only with specifically designated battery packs. Use of any other battery

packs may create a risk of injury and fire.

▪ When battery pack is not in use, keep it away from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal objects, that can make a connection from

one terminal to another. Shorting the battery terminals together may cause burns or a fire.

▪ Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical

help. Liquid ejected from the battery may cause irritation or burns.

POWDP35170 EN

▪ Do not use a battery pack or tool that is damaged or modified. Damaged or modified

batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.

▪ Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or

temperature above 130 °C may cause explosion.

▪ Follow all charging instructions and do not charge the battery pack or tool outside the

temperature range specified in the instructions. Charging improperly or at temperatures

outside the specified range may damage the battery and increase the risk of fire.

5.6 Service

▪ Your power tool should be serviced by a qualified specialist using only standard spare

parts. This will ensure that it meets the required safety standards.

6 SPECIFIC SAFETY INSTRUCTIONS FOR ANGLE GRINDERS

▪ Remove any packing material and loose parts from the unit.

▪ Check the accessories before use. It should be fit with the machine and your purpose.

▪ If the machine is new, the battery must first be charged.

▪ Check that the maximum speed indicated on the grinding disc corresponds to the

maximum speed of the machine. The speed of the machine must not exceed the value on

the grinding disc.

▪ Make sure that the dimensions of the grinding disc correspond to the specifications of the

machine.

▪ Make sure that the grinding disc has been mounted and fastened properly. Do not use

reducing rings or adapters to make the grinding disc fit properly.

▪ Treat and store grinding discs in conformance with the supplier’s instructions.

▪ Do not use the machine for grinding workpieces with a maximum thickness exceeding the

maximum grinding depth of the grinding disc.

▪ Do not use grinding discs for deburring.

▪ When grinding discs have to be mounted on the thread of the spindle, make sure that the

spindle has sufficient thread. Make sure that the spindle is sufficiently protected and does

not touch the grinding surface.

▪ Before use, inspect the grinding disc for any damage. Do not use grinding discs which are

cracked, ripped or otherwise damaged.

▪ Before use, let the machine run idle for 30 seconds.

▪ Immediately switch off the machine in case of abnormal vibrations or occurrence of

another defect. Carefully inspect the machine and grinding disc before switching the

machine on again.

▪ Make sure that sparks do not put people into danger or that they contact highly flammable

substances.

▪ Make sure that the workpiece is sufficiently supported or clamped. Keep your hands away

from the surface to be cut.

▪ Always wear safety goggles and hearing protection. If desired or required also use another

kind of protection like for example an apron or helmet.

▪ Ensure that mounted wheels and points are fitted in accordance with the manufacturer’s

instructions.

▪ Ensure that blotters are used when they are provided with the bonded abrasive product

and when they are required.

▪ If a guard is supplied with the tool never use the tool without such a guard.

▪ For tools intended to be fitted with threaded hole wheel, ensure that the thread in the

wheel is long enough to accept the spindle length.

▪ Ensure that ventilation openings are kept clear when working in dusty conditions.

POWDP35170 EN

7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND

CHARGERS

7.1 Batteries

▪ Never attempt to open for any reason.

▪ Do not store in locations where the temperature may exceed 40 °C.

▪ Charge only at ambient temperatures between 4 °C and 40 °C.

▪ Store your batteries in a cool dry place (5 °C-20 °C). Never store batteries in discharged

state.

▪ It is better for Li-ion batteries to discharge and reload them regularly (at least 4 times a

year). The ideal charge for long-term storage of your Li-ion battery is 40% of capacity.

▪ When disposing of batteries, follow the instructions given in the section “Protecting the

environment”.

▪ Do not cause short circuits. If connection is made between the positive (+) and negative (-)

terminal directly or via accidental contact with metallic objects, the battery is short circuited

and an intense current will flow causing heat generation which may lead to casing rupture

or fire.

▪ Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators

and other polymer components may be damaged resulting in electrolyte leakage and/or

internal short circuiting leading to heat generation causing rupture or file. Moreover do not

dispose of the batteries in fire, explosion and/or intense burning may result.

▪ Under extreme conditions, battery leakage may occur. When you notice liquid on the

battery, proceed as follows:

− Carefully wipe the liquid off using a cloth. Avoid skin contact.

− In case of skin or eye contact, follow the instructions below:

✓ Immediately rinse with water. Neutralize with a mild acid such as lemon juice or

vinegar.

✓ In case of eye contact, rinse abundantly with clean water for at least 10 minutes.

Consult a physician.

Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do

not incinerate the battery.

7.2 Chargers

▪ Never attempt to charge non-rechargeable batteries.

▪ Have defective cords replaced immediately.

▪ Do not expose to water.

▪ Do not open the charger.

▪ Do not probe the charger.

▪ The charger is intended for indoor use only.

8 CHARGING AND INSERTION OR REMOVAL OF BATTERY

8.1 Charger indications (Fig. 1)

Connect the charger to the power outlet socket:

▪ Solid green: ready to charge.

▪ Flickering red: charging.

▪ Solid green: charged.

▪ Solid green and red: battery or charger damaged.

POWDP35170 EN

Note: If the protective guard cannot be fixed firmly by the lock lever (4), use

a hexagon wrench to tighten the hexagon nut.

Warning: the protective guard must be positioned to protect the user if the

disc shatters during use.

9.3 Replacing the grinding disc (Fig. 6-7)

Beware – a disc which has been used may be very hot!

Warning: prior to assembly and adjustment always pull out the battery pack

from the grinder body.

▪ Depress and hold down the spindle lock button (2) to secure the spindle.

▪ Turn the output spindle until it locks.

▪ Remove the outer flange and backing flange by using the two-hole spanner provided.

▪ Fit the desired disc (9) on the spindle and replace the outer flange and backing flange.

Release the spindle lock.

Important! Only ever press the spindle lock when the motor and grinding

spindle are at a standstill!

You must keep the spindle lock pressed while you change the wheel!

Switch the grinder on using the lock/on switch (3) and let it run for 30 seconds to check that it

is working correctly and that there are no abnormal vibrations. Stop the grinder immediately if

heavy vibration occurs, and investigate the cause.

For grinding disc and cutting wheel with a thickness up to approx. 3 mm, screw on the outer

flange with the flat side facing the grinding disc or cutting wheel.

10 OPERATION

10.1 Switch on/off (Fig. 8)

Before engage the ON/OFF switch button, check that the grinding disc is

properly fitted and run smoothly, the outer flange is well tightened.

▪ Connect the battery pack onto the angle grinder body.

10.1.1 Switching on

Push the lock/on switch (3) forward, afterwards depress the lock/on switch (3) fully.

10.1.2 Switching off

Release the lock/on switch (3). The switch will return automatically to the locked position.

The wheel continues to rotate after the tool is switched off.

POWDP35170 EN

11 USE

11.1 Wrench storage (Fig. 9)

▪ For a convenient use and storage, this tool features a wrench storage function. You can

store your wrench into the auxiliary handle after use.

▪ Insert the wrench into the slot available in the auxiliary handle.

▪ The wrench is totally stored until the prominences on the wrench is locked on the auxiliary

handle sockets.

▪ To use the wrench and take it out of the handle, simply hold the two sides of the wrench

pin and pull it out.

11.2 Rough grinding (Fig. 10)

Warning: Never use a cutting disc for grinding. To grind, only use the guard

designed for grinding.

CAUTION: Never press the spindle locking button while the disc is rotating.

For best grinding results, position the tool at an angle of between 30° and

40° Move the tool backwards and forwards applying light pressure. This

way, the item being worked on will not heat up too much, will not discolour

and avoids forming grooves.

11.3 Cutting (Fig. 11)

To cut metal, always use the guard designed for cutting.

▪ While cutting, move the tool forward without forcing it, depending on the material you are

cutting.

▪ Don’t apply pressure to the cutting disc.

▪ Don’t tilt the tool or move it from side to side.

▪ Do not reduce the cutting disc speed when it’s been turned off by applying lateral

pressure.

▪ The tool must always work in an abrasive movement directed upwards. Otherwise, it risks

being propelled in an uncontrolled manner away from the cutting line.

▪ When cutting bars with square sections or profiles, it’s preferable to start with the

straightest part.

NOTE: When you use the right angle grinder for cutting purposes, avoid

tilting it in the cutting plane. The cutting wheel must have a clean cutting

edge. A diamond cutting wheel is advised to cut hard stone.

WARNING: Never use a grinding disc for cutting.

WARNING: Never use a cutting wheel for rough grinding.

WARNING: Materials containing asbestos must not be processed!

Powerplus POWDP35170 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Powerplus POWDP35170

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info