POWDP20400 EN
Copyright © 2020 VARO P a g e | 10 www.varo.com
9.7.1 Switch lock (Fig. 5)
The switch trigger can be locked in the centre position.
This helps to reduce the possibility of accidental starting when not in use. To lock the switch
trigger, place the direction of rotation selector in the centre position.
9.7.2 Direction of rotation (Fig. 6)
Direction of rotation is controlled by the direction of rotation selector located above the switch
trigger.
9.7.2.1 Clockwise rotation:
Right: To select forward rotation, release the on/off switch and push the forward/reverse lever
to the left side of the tool.
9.7.2.2 Anticlockwise rotation:
Left: To select reverse rotation, push the lever to the right side of the tool.
9.7.3 Variable speed
This tool has a variable speed switch that delivers higher speed and torque with increased
trigger pressure.
Speed is controlled by the amount of switch trigger depression.
9.8 LED light (Fig. 7)
The LED work-light can light prior to motor running if you press the switch lightly, which keep
the work area to be lighted for checking clearly at first, and it lights also during your operation.
WARNING: Do not stare directly at the light beam. Never aim the beam at
any person or an object other than the work piece.
Do not deliberately aim the beam at personnel and ensure that it is not
directed towards the eye of a person for longer than 0.25 s.
10 GENERAL OPERATING INSTRUCTIONS
▪ Make sure that the ON/OFF switch trigger is in the off-position and the direction of rotation
selector is centred, then attach the battery pack.
▪ Attach the desired socket (sold separately) to the anvil.
▪ Note: Use socket/extensions designed for impact wrench use.
▪ Set the desired direction with the direction of rotation selector.
CAUTION: To prevent damage, allow the Anvil to come to a complete stop
before changing the direction of rotation.
▪ Position the socket over the fastener.
▪ Holding the handle firmly with one hand and the top of the housing with your other hand,
gently squeeze the ON/OFF switch trigger.
▪ To prevent accidents, turn off the tool and remove its battery pack after use. Clean, then
store the tool indoors out of children’s reach.
