POWDP20160 EN
Copyright © 2020 VARO P a g e | 10 www.varo.com
9.7 Switch (6)
The impact wrench is started and stopped by depressing and releasing the ON/OFF switch
trigger.
9.7.1 Switch lock (Fig. 5)
The switch trigger can be locked in the centre position.
This helps to reduce the possibility of accidental starting when not in use. To lock the switch
trigger, place the direction of rotation selector in the centre position.
9.7.2 Direction of rotation (Fig. 6)
Direction of rotation is controlled by the direction of rotation selector located above the switch
trigger.
9.7.2.1 Clockwise rotation:
Right: To select forward rotation, release the on/off switch and push the forward/reverse lever
to the left side of the tool.
9.7.2.2 Anticlockwise rotation:
Left: To select reverse rotation, push the lever to the right side of the tool.
9.7.3 Variable speed
This tool has a variable speed switch that delivers higher speed and torque with increased
trigger pressure.
Speed is controlled by the amount of switch trigger depression.
9.8 Speed adjustment
There are three speed settings for this machine. Press the round button on the speed display
board, to change the speed accordingly
The speed display board shows below information:
9.9 LED light (Fig. 7)
There are 3 LED lights at the front of this tool.
The LED work-lights can light prior to motor running if you press the switch lightly, which keep
the work area to be lighted for checking clearly at first, and it lights also during your operation.
