480883
1
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
POW63703 EN
Copyright © 2014 VARO P a g e | 1 www.varo.com
1 APPLICATION .................................................................................. 3
2 DESCRIPTION (FIG. A) ................................................................... 3
3 PACKAGE CONTENT LIST ............................................................. 3
4 SYMBOLS ........................................................................................ 4
5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4
5.1 Working area ........................................................................................................... 4
5.2 Electrical safety ....................................................................................................... 4
5.3 Personal safety ....................................................................................................... 5
5.4 Power tool use and care ......................................................................................... 5
5.5 Service ..................................................................................................................... 6
6 ADDITIONAL SAFETY INSTRUCTIONS FOR LAWN MOWERS .. 6
7 ASSEMBLY ...................................................................................... 7
7.1 Preparation .............................................................................................................. 7
8 SETTING THE CUTTING HEIGHTS ................................................ 7
8.1 To adjust the front wheel cutting height position (fig. 2a) .................................... 7
8.2 To adjust the rear wheel cutting height position (fig. 2b) ..................................... 7
8.3 Cutting height positions (fig.2c)............................................................................. 7
9 OPERATION ..................................................................................... 8
9.1 Connect to power supply. ...................................................................................... 8
9.2 Starting (Fig. 3) ........................................................................................................ 8
9.3 Stopping .................................................................................................................. 8
9.4 Safety button ........................................................................................................... 8
9.5 Information on correct mowing .............................................................................. 8
10 CLEANING AND MAINTENANCE ................................................... 9
10.1 Cleaning................................................................................................................... 9
10.2 Blade maintenance(fig.4) ........................................................................................ 9
10.3 Replacing the blade ................................................................................................ 9
11 TECHNICAL DATA ........................................................................ 10
12 NOISE ............................................................................................. 10
13 SERVICE DEPARTMENT .............................................................. 10
14 STORAGE ...................................................................................... 10
POW63703 EN
Copyright © 2014 VARO P a g e | 2 www.varo.com
14.1 Long time storage: ................................................................................................ 10
14.2 Hibernation ............................................................................................................ 10
15 TROUBLE SHOOTING .................................................................. 11
16 WARRANTY ................................................................................... 11
17 ENVIRONMENT ............................................................................. 12
18 DECLARATION OF CONFORMITY .............................................. 13
POW63703 EN
Copyright © 2014 VARO P a g e | 3 www.varo.com
LAWN MOWER 900W
POW63703
1 APPLICATION
This product is intended for domestic lawn mowing. It is not designed for commercial use.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
2 DESCRIPTION (FIG. A)
1. Switch lever
2. Handle top
3. Switch case
4. Safety button
5. Wing nuts
6. Handle bottom
7. Grass bag
8. Deflector guard
9. Front cover
10. Wheels
11. Cable holder
3 PACKAGE CONTENT LIST
Remove all packaging materials.
Remove remaining packaging and packing inserts (if included).
Check that the package contents are complete.
Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
Keep the packing materials as long as possible till the end of the warranty period. Dispose
it into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! There is a danger of suffocation!
Manual
Wheels
Wheel covers
Accessory pack(bolt, spanner, screws, washers,pins, cable holders)
If any parts are missing or damaged, please contact your dealer.
POW63703 EN
Copyright © 2014 VARO P a g e | 4 www.varo.com
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Denotes risk of personal
injury or damage to the tool.
Read manual before use
Keep bystanders away
Warning! Flying objects
Keep hands and feet away
from sharp parts.
Remove plug from the
mains immediately if the
cable is damaged or cut.
Indicates electrical shock
hazard.
Never operate the
machine in the rain or in
damp or wet conditions.
Moisture is an electrical
shock hazard.
Wear ear guards and
goggles
Keep the power cable
away from the cutters!
In accordance with essential
safety standards of
applicable European
directives
Class II - The machine is
double insulated; Earthing
wire is therefore not
necessary.
Wait until all machine components have completely stopped before
touching them. The blades continue to rotate after the machine is switched
off, a rotating blade can cause injury.
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
for future reference. The term "power tool" in the safety warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) power tool.
5.1 Working area
Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
Keep children and bystanders at a distance when operating a power tool. Distractions can
cause you to lose control of it.
5.2 Electrical safety
Always check that the power supply corresponds to the voltage on the
rating plate.
POW63703 EN
Copyright © 2014 VARO P a g e | 5 www.varo.com
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
adapter plugs with earthed power tools. Unmodified plugs and matching outlets will reduce
the risk of a lethal electric shock.
Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and
refrigerators. There is an increased risk of a lethal electric shock if your body is earthed.
Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will
increase the risk of a lethal electric shock.
Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of a lethal electric shock.
When operating a power tool outdoors, use an extension cable suitable for outdoor use.
Using a cord suitable for outdoor use reduces the risk of a lethal electric shock.
If operating a power tool in a damp location is unavoidable, use a power supply protected
by a residual current device (RCD). Using an RCD reduces the risk of a lethal electric
shock.
5.3 Personal safety
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention when operating a power tool may result in serious
personal injury.
Use safety equipment. Always wear eye protection. Using safety equipment such as a
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed
will reduce the risk of personal injury.
Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
Remove any adjusting keys or spanners before turning on the power tool. A spanner or
key left attached to a rotating part of the power tool may result in personal injury.
Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable
you retain control over the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
5.4 Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
Maintenance. Check for misalignment or jammed moving parts, breakages or any other
feature that might affect the operation of the power tool. If it is damaged, the power tool
must be repaired. Many accidents are caused by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
POW63703 EN
Copyright © 2014 VARO P a g e | 6 www.varo.com
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 ADDITIONAL SAFETY INSTRUCTIONS FOR LAWN MOWERS
Never allow children or people unfamiliar with these instructions to use the lawnmower.
Local regulations may restrict the age of the operator.
Never mow while people, especially children or pets, are nearby.
The operator or user is responsible for accidents or hazards occurring to other people or
their property.
Do not operate the lawnmower when barefoot or wearing open sandals, always wear
substantial footwear and long trousers.
Thoroughly inspect the area where the lawnmower is to be used and remove all stones,
sticks, wires, bones and other foreign objects.
Before using, always visually inspect to see that the blades, blade bolts and cutter
assembly are not worn or damaged.
Replace worn or damaged blades and bolts in sets to preserve balance.
Mow only in daylight or in good artificial light.
Avoid operating the lawnmower in wet grass, where feasible.
Walk, never run.
Never operate the appliance with defective guards or shields, or without safety device, for
example deflectors and/or grass catchers in place.
Mowing on banks can be dangerous:
Do not mow excessively steep slopes.
Always be sure of your footing on slopes or wet grass.
Mow across the face of slopes never up and down.
Exercise extreme caution when changing direction on slopes.
Use extreme caution when stepping back or pulling the lawnmower towards you.
Never mow by pulling the mower towards you.
Stop the blades if the lawnmower has to be tilted for transportation when crossing
surfaces other than grass and when transporting the lawnmower to and from the area to
be mowed.
Do not tilt the machine when starting or switching on the motor, except if the machine has
to be tilted for starting in long grass. In this case, do not tilt it more than absolutely
necessary and tilt only the part which is away from the operator. Always ensure that both
hands are in the operating position before returning the machine to the ground.
Switch on the lawnmower according to instructions and with feet well away from the
blades.
Do not put hands or feet near or under rotating parts.
Keep clear of discharge opening at all times.
Never pick up or carry the lawnmower while the motor is running.
Remove the plug from the socket:
whenever you leave the machine
before clearing a blockage
before checking, cleaning or working on the lawnmower
after striking a foreign object. Inspect the lawnmower for damage and make repairs as
necessary if the lawnmower starts to vibrate abnormally (check immediately).
Keep all nuts, bolts and screws tight to be sure that the lawnmower is in safe working
condition.
POW63703 EN
Copyright © 2014 VARO P a g e | 7 www.varo.com
Check the grass catcher frequently for wear or deterioration.
Replace worn or damaged parts for safety.
7 ASSEMBLY
The lawn mower is delivered unassembled. The complete push bar must be assembled before
using the lawn mower. Follow the operating instructions step-by-step and use the pictures
provided as a visual guide to easily assemble the machine.
7.1 Preparation
Put the cable hook on upper handle (Fig. 1a)
Connect upper and lower handles with supplied screws and knobs. (Fig. 1b)
Insert the handles into the mower body. (Fig. 1c)
Fit each wheels over the axles, secure in place with the “R” pins and press the wheel
covers into place. (Fig 1d & 1e)
Fix the cable holders. (Fig. 1f)
Grasse collection box assembly. Assemble two halves and fix them together. (Fig. 1g)$
Lift the flap and place the grass box over the lugs. (Fig. 1h)
8 SETTING THE CUTTING HEIGHTS
Important! Adjust the cutting height only when the engine is switched off
and the power cable has been disconnected.
Before you begin to mow, check to ensure that the blade is not blunt and that none of the
fasteners are damaged. To prevent any imbalance, replace blunt and/or damaged blades. To
carry out this check, first switch off the motor and pull out the power plug.
To obtain the desired cutting height, the front and rear axles are repositioned on the underside
of the mower housing.
Warning! Disconnect the mower from the power supply and ensure the
blade has stopped coasting before adjusting the height.
8.1 To adjust the front wheel cutting height position (fig. 2a)
Turn the mower upside down.
Pull the wheel axle towards the front of the mower.
Locate the wheel axle into the desired cutting height adjustment position.
Note: Make sure that both front right and left wheels are located in the same
cutting height adjustment position.
8.2 To adjust the rear wheel cutting height position (fig. 2b)
Turn the mower on its side.
Pull the rear wheel axle towards the mowers catcher flap.
Locate the wheel axle into the desire cutting height adjustment position.
Note: Make sure that both rear right and left wheel are located in the same
cutting height adjustment position.
8.3 Cutting height positions (fig.2c)
25 mm (lowest cutting height position)
40 mm
55 mm (highest cutting height position)
POW63703 EN
Copyright © 2014 VARO P a g e | 8 www.varo.com
9 OPERATION
9.1 Connect to power supply.
Before you connect the equipment to the mains supply make sure that the data on the rating
plate are identical to the mains data.
Connect the plug to an extension cable. It is imperative to secure the extension cable with the
cable grip.
9.2 Starting (Fig. 3)
Press and hold safety button (A) (then squeeze the switch lever (B) towards the handle).
Release the safety button.
9.3 Stopping
Release the switch lever.
ATTENTION : After switching off, the cutting blade will go on turning for a
few seconds, make sure the blade has come to a complete standstill.
CAUTION: Do not rapidly switch off and on.
9.4 Safety button
Important! To prevent the machine switching on accidentally, the lawn mower is equipped with
a safety lock-off which must be pressed before the switching bar can be activated. The lawn
mower switches itself off when the switch is released.
Repeat this process several times so that you are sure that the machine functions properly.
Before you perform any repair or maintenance work on the machine, ensure that the blade is
not rotating and that the power supply is disconnected.
Important! Never open the discharge flap if the grass bag is being emptied
and the motor is still running. The rotating blade can cause serious injuries.
Always secure the discharge flap and grass bag carefully. Always switch off the motor before
you remove these items. The safety distance between the blade casing and the user provided
by the guide struts must be maintained at all times.
9.5 Information on correct mowing
We recommend that you mow in overlapping lines. Only mow with sharp, perfect blades so
that the blades of grass do not fray, making the lawn turn yellow.
The cutting height should be between 4 and 6 cm and the growth before the next cut should
be between 4 and 5 cm. If the lawn grows longer than this on occasion, do not make the
mistake of cutting to normal length straight away since this will damage the lawn. Never cut
the grass by more than half its height. Keep the underside of the mower casing clean and
remove all grass deposits from it. Deposits make it more difficult to start the mower and also
adversely affect the mowing quality and the grass discharge. On slopes mow across the slope
(not in up or down direction).You can counteract the tendency of the mower to slide down the
slope by setting it at an angle upwards.
Select the cutting height to suit the actual length of the grass. Make several passes to ensure
that you do not remove more than 4 cm of grass length in any one pass.
Switch off the motor before you carry out any inspections of the blade. Remember than the
blade will continue to turn for a few seconds after the motor has been switched off. Never
attempt to stop the blade.
POW63703 EN
Copyright © 2014 VARO P a g e | 9 www.varo.com
Check regularly that the blade is correctly secured, in good condition and well ground. If not,
grind or replace the blade. If the moving blade strikes an object, stop the mower and wait until
the blade has come to a complete standstill. Then check the condition of the blade and the
blade holder. If they are damaged, they must be replaced.
Place the mains lead in loops on the ground in front of the socket. Mow away from the socket
and cable and ensure that the mains lead is always on the section of lawn that you have
already mowed so that you do not run over the mains lead with the mower. As soon as you
see mown grass on the lawn whilst you are mowing, the grass bag will need emptying.
10 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull out the power
plug.
10.1 Cleaning
Keep all safety devices, air vents and the motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean cloth or blow it with compressed air at low
pressure.
We recommend that you clean the device immediately each time you have finished using
it.
Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning
agents or solvents; these could attack the plastic parts of the equipment. Ensure that no
water can seep into the device.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10.2 Blade maintenance(fig.4)
Regularly remove grass and dirt from the blade.
At the beginning of the gardening season, carefully examine the condition of the blade.
If the blade is very blunt, sharpen or replace the blade.
If the blade is damaged or worn, fit a new blade.
Warning! Observe the following precautions:
Disconnect the mower from the mains and wait until the blade has stopped rotating before
proceeding.
Be careful not to cut yourself. Use heavy-duty gloves or a cloth to grip the blade.
Only use the specified replacement blade.
Do not remove the impeller (A)for any reason.
10.3 Replacing the blade
For safety reasons, we recommend having the blade replaced by an authorized professional.
Important: Wear work gloves!
POW63703 EN
Copyright © 2014 VARO P a g e | 10 www.varo.com
Replacement blade, as this will ensure top performance and safety under all conditions. Carry
out the following steps to change the blade:
Turn the mower onto its side.
Grip the blade( C) with one hand.
Use the spanner supplied to loosen and remove the blade nut (B).
Replace the blade
Securely tighten the blade nut.
11 TECHNICAL DATA
Rated Voltage
230-240V
Rated Frequency
50Hz
Rated Power
900W
Rotation speed
3000min
-1
Cutting width
320mm
Protection class
Class II
Int. protection degree
IPX4
Collect box / bag
35L
Cutting heights
25/40/55mm
Induction motor
Yes
12 NOISE
Noise emission values measured according to relevant standard. (K=2)
75 dB(A)
89 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration):
7.1 m/s²
K = 1.5 m/s²
13 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a special
connecting cable which is available from our service department. Replacement of the
connecting cable should only be carried out by our service department (see last page) or
by a qualified specialist (qualified electrician).
14 STORAGE
Always clean your mower before storage. Store your mower in a clean, dry environment.
To avoid mould on remaining contents, make sure the grass collect bag is empty and dry.
You can fold the handle to save space, loosen the 2 clamps on each side of the handle and
bend the upper handle part towards the front of the machine.
14.1 Long time storage:
Apply some environmentally friendly oil on the mower blade to prevent it from rusting.
14.2 Hibernation
Have your blade sharpened after the mowing season, so your machine is ready for the new
season.
POW63703 EN
Copyright © 2014 VARO P a g e | 11 www.varo.com
15 TROUBLE SHOOTING
PROBLEM
CAUSE
ACTION
Machine fails to
operate
Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Mower in long grass
Motor protector has activated
Turn power on
Use another socket
Inspect cable, replace if
damaged
Replace fuse
Increase height of cut and
tilt mower
Allow to cool and increase
height of cut
Machine functions
intermittently
Extension cable damaged
Machine’s internal wiring
damaged
Motor protector has activated
Inspect cable, replace if
damaged
Allow to cool and increase
height of cut
Machine leaves
ragged finish
Or motor labours
Height of cut too low
Cutting blade blunt
Underside of machine badly
clogged
Blade fitted upside down
Increase height of cut (see
“Height of Cut Adjustment”)
Replace blade (see “Blade
Maintenance”)
Clean machine (see “After
Mowing/Storage”)
Refit blade correctly (see
“Blade Maintenance”)
Cutting blade not
rotating while
machine switched
on
Cutting blade obstructed
Blade nut/bolt loose
Clear obstruction
Tighten blade nut/bolt
Excessive
vibration/noise
Blade nut/bolt loose
Cutting blade damaged
Tighten blade nut/bolt
Replace blade
16 WARRANTY
This product is warranted as provided by law for a 24 -month period effective from the
date of purchase by the first user.
This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
You can always obtain more information at the number 00 32 3 292 92 90.
Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneus net voltage. This list is not exhaustive.
POW63703 EN
Copyright © 2014 VARO P a g e | 12 www.varo.com
Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.
Devices or parts which are replaced under the warranty therefore remain the property of
Varo NV.
We reserve the right to reject a claim whenever the purchase cannot be verified or when it
is clear that the product has not been properly maintained. (Clean ventilation slots, carbon
brushes serviced regularly, etc.).
Your purchase receipt must be kept as proof of date of purchase.
Your appliance must be returned undismantled to your dealer in an acceptably clean state,
(in its original blow-moulded case if applicable to the unit), accompanied by proof of
purchase.
17 ENVIRONMENT
Should your appliance need replacement after extended use, do not dispose of it
with the household refuse, but in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal
household rubbish. Please recycle where recycle facilities exist. Check with your
Local Authority or retailer for recycling advice.
POW63703 EN
Copyright © 2014 VARO P a g e | 13 www.varo.com
18 DECLARATION OF CONFORMITY
VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,
product: Lawn mower 900W
trade mark: POWERplus
model: POW63703
is in conformity with the essential requirements and other relevant provisions of the applicable
European Directives, based on the application of European harmonized standards. Any
unauthorized modification of the apparatus voids this declaration.
European Directives (including, if applicable, their amendments up to the date of signature);
2011/65/EU
2006/42/EC
2004/108/EC
2000/14/EC Annex VI LwA 87dB(A) / 89dB(A)
Testing Authority SNCH / Sandweiler
European harmonized standards (including, if applicable, their amendments up to the date of
signature);
EN60335-1 : 2002
EN60335-2-77 : 2010
EN55014-1 : 2006
EN55014-2 : 1997
EN61000-3-2 : 2006
EN61000-3-3 : 2008
Keeper of the Technical Documentation : Philippe Vankerkhove, VARO Vic. Van Rompuy
N.V.
The undersigned acts on behalf of the company CEO,
Philippe Vankerkhove
Regulatory Affairs Compliance Manager
07/08/13
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Powerplus-POW63703
  • Mijngrasmaaier start moeilijk zeker na stilleggen iemand enig idee waaraan het zou liggen ontsteking goed en krijgt brandstof Gesteld op 25-10-2021 om 18:56

    Reageer op deze vraag Misbruik melden
  • Ik ben de Powerplus aan het monteren maar bij de wieltjes aangekomen wordt gezegd, zet ze vast met R-enne. Ik heb geen idee wat R-pennen zijn. Wie kan me wat wijzer maken. Gesteld op 24-6-2014 om 08:51

    Reageer op deze vraag Misbruik melden
    • Waarschijnlijk had je dit al uitgevonden, maar het werkt dus als volgt:
      - Wiel om de schroef
      - Rond plaatje (waar je er vier van hebt) om de schroef
      - Pennetje (waar je er vier van hebt) door het gaatje in de schroef steken
      - Binnenwieltje erop schuiven en vastklikken Geantwoord op 3-9-2014 om 22:01

      Waardeer dit antwoord (40) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POW63703 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POW63703 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Powerplus POW63703

Powerplus POW63703 Gebruiksaanwijzing - Nederlands - 14 pagina's

Powerplus POW63703 Gebruiksaanwijzing - Deutsch - 14 pagina's

Powerplus POW63703 Gebruiksaanwijzing - Français - 14 pagina's

Powerplus POW63703 Aanvulling / aanpassing - Alle talen - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info