480880
9
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
POW63170 EN
Copyright © 2012 VARO P a g e | 1 www.varo.com
1 APPLICATION .................................................................................. 2
2 DESCRIPTION (FIG. A) ................................................................... 2
3 PACKAGE CONTENT LIST ............................................................. 2
4 SYMBOLS ........................................................................................ 2
5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3
5.1 Working area ........................................................................................................... 3
5.2 Electrical safety ....................................................................................................... 3
5.3 Personal safety ....................................................................................................... 3
5.4 Power tool use and care ......................................................................................... 4
5.5 Service ..................................................................................................................... 4
6 SPECIFIC SAFETY INSTRUCTIONS .............................................. 4
7 INSTALLATION ................................................................................ 5
8 OPERATION INSTRUCTIONS ........................................................ 5
9 TECHNICAL DATA .......................................................................... 7
10 SOUND EMISSION .......................................................................... 7
11 CLEANING AND MAINTENANCE ................................................... 7
11.1 Cleaning................................................................................................................... 7
11.2 Replacing carbon brushes ..................................................................................... 7
11.3 Maintenance ............................................................................................................ 7
12 STORAGE ........................................................................................ 7
13 WARRANTY. .................................................................................... 8
14 ENVIRONMENT ............................................................................... 8
15 DECLARATION OF CONFORMITY ................................................ 9
POW63170 EN
Copyright © 2012 VARO P a g e | 2 www.varo.com
POW63170 BLOWVAC 3000W
1 APPLICATION
The blower/vacuum is designed to blow/vacuum leaves as well as lawn debris such as grass
clippings and small twigs. It is not to be used for any other purpose. The device is only to be
used on dry surfaces. The device is intended for non-commercial use in private home and
gardens. Under no circumstances is it to be used in public outdoor areas, sports stadiums or
in agricultural or forestry settings.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
2 DESCRIPTION (FIG. A)
1. Bottom tube section
2. Rollers
3. Top tube section
4. Leaf bag securing clip on the top
tube
5. Leaf bag
6. Blow - Vacuum function selector
lever
7. Motor casing
8. Shoulder strap
9. Main ON/OFF switch
10. Speed Control
3 PACKAGE CONTENT LIST
Remove all packaging materials.
Remove remaining packing and package inserts (if included).
Check that the package contents are complete.
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
Keep the packing materials as far as possible till the end of the warranty period. Dispose it
into your local waste disposal system afterwards.
WARNING! Packing materials are not toys! Children must not play with
plastic bags! There is a danger of suffocation!
Content:
Blower/vacuum
Leaf bag
Shoulder strap
2 wheels
Manual
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal
injury or damage to the
tool.
Wear noise protection
Read manual before use
Wear eye protection
POW63170 EN
Copyright © 2012 VARO P a g e | 3 www.varo.com
In accordance with
essential requirements of
the European directive(s)
Wear a mask In dusty conditions
In accordance with
essential requirements of
the European directive(s)
Never operate the machine in the
rain or in damp or wet conditions.
Moisture is an electrical shock
hazard.
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
for future reference. The term "power tool" in the safety warnings refers to your mains-
operated (corded) power tool or battery- operated (cordless) power tool.
5.1 Working area
Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
Keep children and bystanders at a distance when operating a power tool. Distractions can
cause you to lose control of it.
5.2 Electrical safety
Always check that the power supply corresponds to the voltage on the
rating plate.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
adapter plugs with earthed power tools. Unmodified plugs and matching outlets will reduce
the risk of an electric shock.
Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and
refrigerators. There is an increased risk of an electric shock if your body is earthed.
Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will
increase the risk of an electric shock.
Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of an electric shock. If a retractable cord is used, the cord
should be fully reeled out to avoid heating up.
If operating a power tool in a damp location is unavoidable, use a power supply protected
by a residual current device (RCD). Using an RCD reduces the risk of an electric shock.
5.3 Personal safety
Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use a power tool when you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention when operating a power tool may result in serious
personal injury.
Use safety equipment. Always wear eye protection. Using safety equipment such as a dust
mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed will
reduce the risk of personal injury.
Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
Remove any adjusting keys or spanners before turning on the power tool. A spanner or key
left attached to a rotating part of the power tool may result in personal injury.
POW63170 EN
Copyright © 2012 VARO P a g e | 4 www.varo.com
Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable
you retain control over the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from the power tool. Loose clothes, jewellery or long hair can become entangled in
the moving parts.
If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
5.4 Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what you
want to do. A power tool will achieve better results and be safer if used in the context for
which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or jammed moving parts, breakages or any
other feature that might affect the operation of the power tool. If it is damaged, the power
tool must be repaired. Many accidents are caused by using poorly maintained power tools.
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool in
ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 SPECIFIC SAFETY INSTRUCTIONS
Make sure the power cord is kept behind and away from the device while you work.
Always position yourself horizontally to the slope and make sure your feet are firmly
planted. Exercise particular caution whenever you change directions while working on a
slope.
Walk at a measured pace while operating the blower. DO NOT RUN.
Never direct the suction/blown air opening toward persons or animals.
POW63170 EN
Copyright © 2012 VARO P a g e | 5 www.varo.com
7 INSTALLATION
Your new blower vac requires very little assembly work before it is ready for use.
Insert the intermediate suction/blower tube (1.1) into the vacuum-blower body ensuring that it
is fitted correctly and pushed fully home and secure with the two screws provided. Fit the
wheeled suction-blower tube into the intermediate suction-blower tube (1.2). Ensuring that it is
fitted correctly and pushed fully home.
Safety switch
Your blowvac tool comes equipped with a built-in safety switch to prevent the tool from starting
should the supplied tubes not be correctly mounted.
Shoulder strap:
The shoulder strap will be supplied inside the leaf bag. Take the shoulder strap out of the leaf
bag, open the snap fastener, thread the strap through the metal clip on the top of the motor
casing and then close the snap fastener. To adjust the shoulder strap to the required length,
simply slide the adjustable strap buckle forward or backwards.
Leaf bag:
Press de plastic openings of the leaf bag over the lower openings of the tool so that the 2
plastic clamps are firmly in place. The loops may be hung on the various plastic hooks
8 OPERATION INSTRUCTIONS
Steps prior to operation
Only operate the device after completely assembling it. Prior to each use, check the power
cord for signs of damage. Under no circumstances should the power cord be used if it shows
any signs of damage.
Ensure that the blower vac is only connected to conventional sockets with a 240V alternating
current supply. Only use extension cables if they are really necessary. The use of extension
cables may cause a drop in voltage, which will result in the tool not performing to its peak or
the motor overheating.
Switching ON/OFF
To switch on the blow/vac push in the on/off trigger switch (9) and hold. To switch off the tool,
release the on/off trigger switch.
1.1
1.2
POW63170 EN
Copyright © 2012 VARO P a g e | 6 www.varo.com
Speed regulation
You can vary the speed by turning the switch (10) from 1 (low speed) to 6 (high speed).
Use/Operation
The easiest way to use the blower vac is to place the shoulder strap in a comfortable position
over your shoulder and hold the rear handle at hip height so that the majority of the tool’s
weight rests on the rollers.
When using the blower vac to pick up leaves it is best to move the tool on its rollers. This
ensures that the blower vac is at the perfect height above the ground. The blower vac is
designed only to pick up leaves. To avoid l damage to the tool that is not covered by the
warranty, do not use it to pick up branches, stones or other hard materials.
When using the tool as a leaf blower always work away from solid objects such as walls,
fences, etc. Whilst you work do not place the blower vac tube too close to the leaves. The tool
will be more effective if you keep it at a certain distance away from the leaves and blow the
leaves forwards.
Switching operating mode
To switch the tool from blower mode to
vacuum mode, simply switch it off at the main
switch and move the function selector lever
to the other position.
1 vac / 2 blow
Leaf bag
Note: Before you remove and empty the leaf bag ensure that the tool has been disconnected
from the mains power supply.
To empty the leaf bag simply open the zip fastener, empty the bag and then close the zip
fastener again
When the leaf bag is open you can also check the
function of the blower vac’s slide control. If there is a
blockage in the tool, check this function and remove the
blockage.
POW63170 EN
Copyright © 2012 VARO P a g e | 7 www.varo.com
9 TECHNICAL DATA
POW63170
Voltage / frequency :
230-240V~50 Hz
Power
3000W
No load speed :
8000-14000 min-1
Max airspeed
160-275 km/h
Max air volume
13,5 m³/min
Dust bag
45 L
Shredding ratio :
10 : 1
10 SOUND EMISSION
Noise emission values measured according to relevant standard (K=3).
Acoustic pressure level LpA
106 dB(A)
Acoustic power level LwA
93 dB(A)
ATTENTION ! The sound power pressure may exceed 85 dB(A), in this case
individual hearing protection must be worn.
aw (Vibration)
2,3 m/s²
K = 1,5 m/s²
11 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
11.1 Cleaning
Keep the ventilation slots of the tool clean to prevent overheating of the engine.
Regularly clean the tool housing with a soft cloth, preferably after each use.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
11.2 Replacing carbon brushes
Remove and check the carbon brushes regularly. Replace when they have worn down to the
limit mark. Keep the carbon brushes clean and free to slip in the holders. Both carbon brushes
must be replaced at the same time. Only use original carbon brushes.
11.3 Maintenance
Our tools have been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular
cleaning.
12 STORAGE
1. Thoroughly clean the whole tool and its accessories.
2. Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
3. Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
4. Don’t keep it in plastic bags to avoid humidity build-up.
POW63170 EN
Copyright © 2012 VARO P a g e | 8 www.varo.com
13 WARRANTY.
This product is warranted as provided by law for a 24 -month period effective from the date
of purchase by the first user.
This warranty covers all material or production flaws. It does not include defective parts
subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories
such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment,
accidents or alterations; nor the cost of transportation.
This warranty covers all material or production flaws, excluding batteries, chargers,
defective parts subject to normal wear and tear such as, in particular, bearings, brushes,
cables, plugs… Accessories such as drills, drill bits, saw blades etc. also do not fall under
this warranty.
Damage and/or defects resulting from inappropriate use also do not fall under the warranty
provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool.
Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
You can always obtain more information at the number 00 32 3 292 92 90.
Any transportation costs shall always be borne by the customer, unless agreed otherwise in
writing.
At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike, erroneus
net voltage. This list is not exhaustive.
Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.
Devices or parts which are replaced under the warranty therefore remain the property of
Varo NV.
We reserve the right to reject a claim whenever the purchase cannot be verified or when it
is clear that the product has not been properly maintained. (Clean ventilation slots, carbon
brushes serviced regularly, etc.).
Your purchase receipt must be kept as proof of date of purchase.
Your appliance must be returned undismantled to your dealer in an acceptably clean state,
(in its original blow-moulded case if applicable to the unit), accompanied by proof of
purchase.
14 ENVIRONMENT
Should your appliance need replacement after extended use, do not dispose of it
with the household refuse, but in an environmentally safe way.
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.
POW63170 EN
Copyright © 2012 VARO P a g e | 9 www.varo.com
15 DECLARATION OF CONFORMITY
VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,
product : Garden blower
trade mark : POWERPlus
model : POW63170
is in conformity with the essential requirements and other relevant provisions of the applicable
European Directives as they relate to European harmonized standards. Any unauthorized
modification of the apparatus voids this declaration.
European Directives (including, if applicable, their amending directives):
2006/95/EC
2004/108/EC
2006/42/EC
2000/14/EC Annex V LwA: 104dB(A) / 106dB(A)
European harmonized standards, and their amendments:
EN60335-1 : 2002
IEC60335-2-100 : 1.0 : 2002
EN55014-1 : 2006
EN55014-2 : 1997
EN61000-3-2 : 2006
EN61000-3-3 : 2008
The undersigned acts on behalf of and under the power of attorney granted by the company
management
Philippe Vankerkhove
Certification Manager
Date : 08/04/2011
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POW63170 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POW63170 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Powerplus POW63170

Powerplus POW63170 Gebruiksaanwijzing - Nederlands - 9 pagina's

Powerplus POW63170 Gebruiksaanwijzing - Deutsch - 10 pagina's

Powerplus POW63170 Gebruiksaanwijzing - Français - 9 pagina's

Powerplus POW63170 Aanvulling / aanpassing - Alle talen - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info