645719
7
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
POW1820 EN
Copyright © 2016 VARO P a g e | 1 www.varo.com
1 APPLICATION ................................................................................... 3
2 DESCRIPTION (FIG A) ...................................................................... 3
3 PACKAGE CONTENT LIST .............................................................. 3
4 SYMBOLS .......................................................................................... 3
5 GENERAL POWER TOOL SAFETY WARNINGS ............................ 4
5.1 Working area ............................................................................................................. 4
5.2 Electrical safety ......................................................................................................... 4
5.3 Personal safety ......................................................................................................... 4
5.4 Power tool use and care ........................................................................................... 5
5.5 Service ....................................................................................................................... 5
6 SPECIFIC SAFETY WARNINGS ....................................................... 5
7 OPERATION ...................................................................................... 5
7.1 Mounting an accessory (fig. A & B) ......................................................................... 5
7.2 Using the flexible spindle (fig. C1 - C4 & D) ............................................................ 6
7.3 Replacing the collet (fig. A & B) ............................................................................... 6
7.4 Switching on and off (fig. A) ..................................................................................... 6
7.5 Adjusting the speed (fig. A) ...................................................................................... 6
7.6 Polishing (fig. A & B)................................................................................................. 6
7.7 Cutting and sanding (fig. A & B) .............................................................................. 7
7.8 Deburring (fig. A & B) ................................................................................................ 7
7.9 Drilling (fig. A & B) .................................................................................................... 7
7.10 Routing (fig. A & B) ................................................................................................... 7
7.11 Engraving (fig. A & B) ............................................................................................... 7
7.12 Grinding and sanding (fig. A & B) ............................................................................ 7
7.13 Replacing a sanding band (fig. B) ............................................................................ 7
7.14 Using the grinding stone (fig. B) .............................................................................. 7
7.15 Using the standard (fig. E) ........................................................................................ 7
8 CLEANING AND MAINTENANCE .................................................... 8
8.1 Cleaning ..................................................................................................................... 8
9 TECHNICAL DATA ............................................................................ 8
POW1820 EN
Copyright © 2016 VARO P a g e | 2 www.varo.com
10 NOISE ................................................................................................. 8
11 WARRANTY ....................................................................................... 8
12 ENVIRONMENT ................................................................................. 9
13 DECLARATION OF CONFORMITY ................................................ 10
POW1820 EN
Copyright © 2016 VARO P a g e | 3 www.varo.com
MULTITOOL
POW1820
1 APPLICATION
Your multi tool has been designed for drilling, routing, engraving, polishing, cutting, grinding
and sanding of wood, metal, plastics and stone. It is not designed for commercial use.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
2 DESCRIPTION (FIG A)
1. On/off switch
2. Speed adjusting wheel
3. Carbon brush holder
4. Spindle lock button
5. Collar
6. Collet nut
3 PACKAGE CONTENT LIST
Remove all packing materials
Remove remaining packaging and transit supports (if existing)
Check the completeness of the packing content
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 pc machine
1 pc flexible pipe
1 pc stand and clamp
40pcs accessories
1pc manual
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Denotes risk of personal injury
or damage to the tool.
Read manual before use
In accordance with essential
safety standards of applicable
European directives
Class II - The machine is double
insulated; Earthing wire is
therefore not necessary.
Mandatory use of eye
protection.
Wear a mask In dusty conditions
Wear noise protection
POW1820 EN
Copyright © 2016 VARO P a g e | 4 www.varo.com
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
for future reference. The term "power tool" in the safety warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) power tool.
5.1 Working area
Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
Keep children and bystanders at a distance when operating a power tool. Distractions can
cause you to lose control of it.
5.2 Electrical safety
Always check that the power supply corresponds to the voltage on the
rating plate.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
adapter plugs with earthed power tools. Unmodified plugs and matching outlets will reduce
the risk of a lethal electric shock.
Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and
refrigerators. There is an increased risk of a lethal electric shock if your body is earthed.
Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will
increase the risk of a lethal electric shock.
Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of a lethal electric shock.
When operating a power tool outdoors, use an extension cable suitable for outdoor use.
Using a cord suitable for outdoor use reduces the risk of a lethal electric shock.
If operating a power tool in a damp location is unavoidable, use a power supply protected
by a residual current device (RCD). Using an RCD reduces the risk of a lethal electric
shock.
5.3 Personal safety
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention when operating a power tool may result in serious
personal injury.
Use safety equipment. Always wear eye protection. Using safety equipment such as a
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed
will reduce the risk of personal injury.
Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
Remove any adjusting keys or spanners before turning on the power tool. A spanner or
key left attached to a rotating part of the power tool may result in personal injury.
Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable
you retain control over the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
POW1820 EN
Copyright © 2016 VARO P a g e | 5 www.varo.com
If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
5.4 Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
Maintenance. Check for misalignment or jammed moving parts, breakages or any other
feature that might affect the operation of the power tool. If it is damaged, the power tool
must be repaired. Many accidents are caused by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 SPECIFIC SAFETY WARNINGS
Do not use the tool on light metal with a magnesium content exceeding
80%, as this type of metal is flammable.
Make sure that the accessories used are suitable for the maximum speed stated in the
technical data.
Make sure that the accessories are mounted according to the instructions.
Only use accessories and adapters supplied by the manufacturer.
Make sure that sparks cannot hit any persons or set flammable materials alight.
Always wear safety goggles, hearing protection and if necessary other protective means,
such as working gloves, hard hat, etc.
7 OPERATION
7.1 Mounting an accessory (fig. A & B)
Keep the spindle lock button (4) depressed.
Use the spanner (7) to slacken the collet nut (6).
Insert the shaft of the accessory into the collet.
Use the spanner to tighten the collet nut.
Release the spindle lock button.
POW1820 EN
Copyright © 2016 VARO P a g e | 6 www.varo.com
In order to remove the accessory, proceed in reverse order.
Before mounting an accessory, always unplug the tool.
7.2 Using the flexible spindle (fig. C1 - C4 & D)
To mount the flexible spindle, proceed as follows:
Keep the spindle lock button (4) depressed.
Loosen the collet nut (6).
Successively remove the collet nut (6) and the collar (5).
Remove the collet nut from the flexible spindle and fit it onto the tool.
Insert the end of the flexible spindle into the collet nut.
Tighten the collet nut.
Release the spindle lock button.
Fit the collar of the flexible spindle onto the tool. Tighten the collar.
Fit the collet nut (6) onto the flexible spindle.
To mount an accessory, proceed as follows:
Position the key (8) in the recess to fix the collet.
Loosen the collet nut (6).
Insert the shaft of the accessory into the collet.
Tighten the collet nut.
Remove the key.
In order to remove the accessory, proceed in reverse order.
Before mounting an accessory, always unplug the tool.
7.3 Replacing the collet (fig. A & B)
Keep the spindle lock button (4) depressed.
Use the spanner (7) to slacken the collet nut (6).
Remove the collet nut and the old collet (9).
Place the new collet.
Replace the collet nut.
Release the spindle lock button.
Always unplug the tool before replacing the collet.
7.4 Switching on and off (fig. A)
To switch the machine on, set the on/off switch (1) to ‘I’.
To switch the machine off, set the on/off switch (1) to ‘0’.
7.5 Adjusting the speed (fig. A)
This machine has been fitted with an adjusting wheel (2) for the maximum speed.
Turn the adjusting wheel (2) as indicated on switch (1) to set the maximum speed.
Choose a low speed for working wood and plastics.
Also choose a low speed for polishing.
7.6 Polishing (fig. A & B)
A polishing wheel is used for polishing metal and plastic workpieces.
A mandrel is used for mounting a polishing wheel.
Place the mandrel (14) in the collet nut (6).
Place a polishing wheel (19) on the screw.
POW1820 EN
Copyright © 2016 VARO P a g e | 7 www.varo.com
7.7 Cutting and sanding (fig. A & B)
A cutting disc is used for cutting metal, plastic, wooden and stone workpieces. A sanding disc
is used for sanding wooden and plastic workpieces. A mandrel is used for mounting a cutting
disc or sanding disc.
Place the mandrel (15) in the collet nut (6).
Loosen the screw on the mandrel.
Place a cutting disc (21) or sanding disc (20) on the screw.
Place the screw on the mandrel and tighten it.
7.8 Deburring (fig. A & B)
A grinding disc for deburring is used for removing burrs from metal workpieces. A mandrel is
used for mounting a grinding disc for deburring.
Place the mandrel (15) in the collet nut (6).
Loosen the screw on the mandrel.
Place a grinding disc for deburring (22) on the screw.
Place the screw on the mandrel and tighten it.
7.9 Drilling (fig. A & B)
A drill bit is used to drill holes in plastic, wooden and stone workpieces.
Place a drill bit (10) in the collet nut (6).
7.10 Routing (fig. A & B)
A router bit is used for grooving and for routing figures in plastic, wooden and metal
workpieces.
Place a router bit (13) in the collet nut (6).
7.11 Engraving (fig. A & B)
An engraving needle is used for engraving figures in metal workpieces.
Place an engraving needle (16) in the collet nut (6).
7.12 Grinding and sanding (fig. A & B)
A grinding stone is used for grinding metal, plastic, wooden and stone workpieces. A sanding
band is used for sanding wooden and plastic workpieces.
Place a grinding stone (11) or sanding band with mandrel (12) in the collet nut (6).
7.13 Replacing a sanding band (fig. B)
A sanding band must be replaced when showing signs of wear.
Remove the old sanding band from the mandrel.
Place the new sanding band (18) on the mandrel.
7.14 Using the grinding stone (fig. B)
Use the grinding stone for removing burrs and other irregularities on the workpiece.
7.15 Using the standard (fig. E)
The standard allows the machine to be hung when using the flexible spindle.
Mount the base (23) to the edge of the worktop.
Turn the telescope arm (24) into the base.
Bring the standard to the desired height by sliding the telescope bars (25) in or out as
required.
Tighten the telescope bars one by one.
Mount the flexible spindle to the machine.
Hang the machine to the standard as shown.
POW1820 EN
Copyright © 2016 VARO P a g e | 8 www.varo.com
8 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
8.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
9 TECHNICAL DATA
Voltage / frequency
Power input
No load speed
Collet size
Weight
Protection class
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
74 dB(A)
Acoustic power level LwA
85 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration):
1.6 m/s²
K = 1.5 m/s²
11 WARRANTY
This product is warranted as provided by law for a 24 -month period effective from the
date of purchase by the first user.
This warranty covers all material or production flaws excluding: batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
You can always obtain more information at the number 00 32 3 292 92 90.
Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
POW1820 EN
Copyright © 2016 VARO P a g e | 9 www.varo.com
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneus net voltage. This list is not exhaustive.
Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.
Devices or parts which are replaced under the warranty therefore remain the property of
Varo NV.
We reserve the right to reject a claim whenever the purchase cannot be verified or when it
is clear that the product has not been properly maintained. (Clean ventilation slots, carbon
brushes serviced regularly, etc.).
Your purchase receipt must be kept as proof of date of purchase.
Your appliance must be returned undismantled to your dealer in an acceptably clean state,
(in its original blow-moulded case if applicable to the unit), accompanied by proof of
purchase.
12 ENVIRONMENT
Should your appliance need replacement after extended use, do not discard it
with the household rubbish but dispose of it in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal
household rubbish. Please recycle where recycle facilities exist. Check with your
Local Authority or retailer for recycling advice.
POW1820 EN
Copyright © 2016 VARO P a g e | 10 www.varo.com
13 DECLARATION OF CONFORMITY
VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,
Product: Multitool
trade mark: POWERplus
model: POW1820
is in conformity with the essential requirements and other relevant provisions of the applicable
European Directives, based on the application of European harmonized standards. Any
unauthorized modification of the apparatus voids this declaration.
European Directives (including, if applicable, their amendments up to the date of signature);
2011/65/EU
2014/30/EU
2006/42/EC
European harmonized standards (including, if applicable, their amendments up to the date of
signature);
EN60745-1 : 2009
EN60745-2-23 : 2013
EN55014-1 : 2006
EN55014-2 : 1997
EN61000-3-2 : 2006
EN61000-3-3 : 2013
Keeper of the Technical Documentation : Philippe Vankerkhove, VARO Vic. Van Rompuy
N.V.
The undersigned acts on behalf of the company CEO,
Hugo Cuypers
Regulatory Affairs Compliance Manager
22/02/16
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POW1820 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POW1820 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Powerplus POW1820

Powerplus POW1820 Gebruiksaanwijzing - Nederlands - 11 pagina's

Powerplus POW1820 Gebruiksaanwijzing - Deutsch - 11 pagina's

Powerplus POW1820 Gebruiksaanwijzing - Français - 11 pagina's

Powerplus POW1820 Aanvulling / aanpassing - Alle talen - 5 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info