Handleiding Polycom SoundStation IP 6000 (pagina 88 van 94) (Engels)

520188

Verklein

Vergroot

Pagina terug

1/94

Pagina verder

SIP 3.2 | July, 2009 | 1725-15645-001 Rev. C

User Guide for the

Polycom

SoundStation

IP 6000

Phone

Polycom, Inc.

4750 Willow Road

Pleasanton, CA 94588-2708

USA

No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for

any purpose, without the express written permission of Polycom, Inc. Under the law, reproducing includes translating

into another language or format.

As between the parties, Polycom, Inc., retains title to and ownership of all proprietary rights with respect to the software

contained within its products. The software is protected by United States copyright laws and international treaty

provision. Therefore, you must treat the software like any other copyrighted material (e.g., a book or sound recording).

Every effort has been made to ensure that the information in this manual is accurate. Polycom, Inc., is not responsible

for printing or clerical errors. Information in this document is subject to change without notice.

Trademark Information

POLYCOM

, the Polycom “Triangles” logo and the names and marks associated with Polycom’s products are

trademarks and/or service marks of Polycom, Inc. and are registered and/or common law marks in the United States

and various other countries. All other trademarks are property of their respective owners. No portion hereof may be

reproduced or transmitted in any form or by any means, for any purpose other than the recipient’s personal use, without

the express written permission of Polycom.

Patent Information

The accompanying product is protected by one or more U.S. and foreign patents and/or pending patent applications

held by Polycom, Inc.

Disclaimer

Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of

incidental or consequential damages for certain products supplied to consumers, or the limitation of liability for personal

injury, so the above limitations and exclusions may be limited in their application to you. When the implied warranties

are not allowed to be excluded in their entirety, they will be limited to the duration of the applicable written warranty. This

warranty gives you specific legal rights which may vary depending on local law.

Portions of the software contained in this product are:

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated

documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to

use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to

whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the

Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,

INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE

LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR

OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER

DEALINGS IN THE SOFTWARE.

iii

About This Guide

Thank you for choosing the Polycom

SoundStation

IP 6000 conference

phone. This phone provides multi-person audio conferencing capabilities for

medium to large conference rooms within a Session Initiation Protocol (SIP)

internet telephony system.

This guide provides everything you need to quickly use your new phone.

Verify with your system administrator that the network is prepared for

configuring the phone. Also, read the Parts List and the Safety and

Compliance section in this guide before you set up and use the phone.

This guide includes regulatory compliance information that your system

administrator should review. You can also view this guide at

www.polycom.com/voicedocumentation.

Changes to This Guide

Major changes have occurred to Managing Contacts on page 2-12. The sections

related to Corporate Directory have been updated.

User Guide for the Polycom SoundStation IP 6000 Phone

Contents

About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

Changes to This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

1 Getting Started with Your Phone . . . . . . . . . . . . . . . . . . . . 1–1

Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2

Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2

Installing the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2

Connecting Network and Power Sources . . . . . . . . . . . . . . . . . . . . . . . 1–3

Power over Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3

AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4

Connecting Optional Extension Microphones . . . . . . . . . . . . . . . . . . . 1–5

Registering the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5

Before You Use Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–6

Features of the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–6

Understanding Line and Call Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–11

Navigating Menus and Entering Data . . . . . . . . . . . . . . . . . . . . . . . . 1–12

2 Customizing Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1

Configuring Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2

Updating Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2

Updating the Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2

Updating the Time and Date Display . . . . . . . . . . . . . . . . . . . . . . 2–3

Updating the Display Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5

Updating the Backlight Intensity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–6

Updating the Ring Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8

Selecting a Ring Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8

Setting Distinctive Ring Tones for Contacts . . . . . . . . . . . . . . . . . 2–9

Adjusting the Speaker and Ringer Volume . . . . . . . . . . . . . . . . . . . . . . . . 2–10

Using Call Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–10

Viewing Call Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–10

Managing Call Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–11

Managing Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–12

Viewing Your Local Contact Directory . . . . . . . . . . . . . . . . . . . . . . . . 2–13

Accessing Your Corporate Directory . . . . . . . . . . . . . . . . . . . . . . . . . . 2–13

Enabling Your Phone to Save Corporate Directory

Search Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–14

User Guide for the Polycom SoundStation IP 6000 Phone

Adding Contacts to Your Local Contact Directory . . . . . . . . . . . . . . 2–14

Adding Contacts Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–15

Adding Contacts from Call Lists . . . . . . . . . . . . . . . . . . . . . . . . . . 2–17

Adding Contacts to Your Contact Directory from a

Corporate Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–18

Searching for Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–19

Searching for Contacts in Your Local Contact Directory . . . . . 2–19

Searching for Contacts in Your Corporate Directory . . . . . . . . . 2–20

Updating Contacts in Your Local Contact Directory . . . . . . . . . . . . 2–21

Deleting Contacts from Your Local Contact Directory . . . . . . . . . . . 2–22

Placing Calls to Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–23

Managing Incoming Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–24

Distinguishing Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–24

Rejecting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–24

Diverting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–25

Understanding Shared Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–26

3 Using the Basic Features of Your Phone . . . . . . . . . . . . . . . 3–1

Placing Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–2

Placing Calls Using Speed Dials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–3

Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–4

Ending Active Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–4

Muting the Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–4

Redialing Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–5

Holding and Resuming Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–5

Hosting Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–6

Setting Up Conferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–6

Setting Up a Conference Using the Conference Soft Key . . . . . . 3–7

Setting Up a Conference with an Active Call and a

Call on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–7

Holding and Resuming Conferences . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–8

Splitting Conferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–8

Ending Conferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–9

Transferring Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–9

Performing a Consultative Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–9

Performing a Blind Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–10

Forwarding Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–10

Forwarding Calls Statically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–11

Forwarding Calls Dynamically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–13

Using Do Not Disturb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–13

Managing Speed Dial Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–14

Using Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–16

Contents

vii

4 Using the Advanced Features of Your Phone . . . . . . . . . . . 4–1

Handling Multiple Call Appearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1

Using Buddy Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2

Updating Presence Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2

Selecting Contacts to Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–3

Blocking Contacts from Viewing Your Status . . . . . . . . . . . . . . . . . . . 4–4

Using Your Blocked List to Unblock Contacts . . . . . . . . . . . . . . . 4–6

Monitoring the Status of Contacts in Your Buddy List . . . . . . . . . . . . 4–6

Integrating with Microsoft Office Live Communications

Server 2005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–7

Using Instant Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–8

Managing Instant Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–8

Sending Instant Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–9

Restarting the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–10

5 Troubleshooting Your Phone . . . . . . . . . . . . . . . . . . . . . . . 5–1

Installation Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2

Power and Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2

Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3

Access to Screens and Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–4

Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–5

Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–6

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–6

Productivity Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–6

Testing Phone Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–7

Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . Safety Notices–1

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Index–1

End-User License Agreement for Polycom® Software

User Guide for the Polycom SoundStation IP 6000 Phone

viii

1 - 1

Getting Started with Your Phone

This chapter provides basic installation instructions and information for

obtaining the best performance from your SoundStation IP 6000 conference

phone.

The phone is a next-generation phone with a modern industrial design, and

the latest advancements in Polycom voice technology.

Some of the key features of the phone include:

• Excellent wideband audio performance

• A console microphone with a range of up to ten feet

• Expansion microphones to accommodate large room sizes

• International language support

• Corporate Directory support

This chapter includes the following topics:

• Parts List on page 1-2

• Installing the Phone on page 1-2

• Registering the Phone on page 1-5

• Features of the Phone on page 1-6

• Understanding Line and Call Icons on page 1-11

• Navigating Menus and Entering Data on page 1-12

To read about how to change the settings on your phone, see Chapter 2,

Customizing Your Phone. To read about the phone’s basic features, see

Chapter 3, Using the Basic Features of Your Phone. To read about more

advanced features, see Chapter 4, Using the Advanced Features of Your

Phone.

If you require additional information or assistance with your new phone, see

your system administrator.

User Guide for the Polycom SoundStation IP 6000 Phone

1 - 2

Parts List

The following items are included in your basic SoundStation IP 6000 package:

• SoundStation IP 6000 Conference Phone

• 25-foot Network Cable

• Quick Start Guide

Make sure your phone package contains each item. If any item is missing, see

your system administrator.

Optional Accessories

The following items are optional accessories for your phone:

• AC Power Kit with:

— Power Adapter

— Regional Power Cord

— Power Insertion Cable

• External Microphone Kit with two extension microphones

Installing the Phone

This section describes how to install your phone. It includes the following

topics:

• Connecting Network and Power Sources on page 1-3.

• Connecting Optional Extension Microphones on page 1-5.

SoundStation IP 6000 Conference Phone

25-foot Network Cable

Quick Start Guide

Getting Started with Your Phone

1 - 3

Connecting Network and Power Sources

There are two ways to connect your phone to the network and a power source.

Your system administrator can tell you which of the following methods best

suits your teleconferencing needs:

• Power over Ethernet (PoE)

• AC Power

Power over Ethernet

Power over Ethernet is the default connection for your phone.

The following figure shows how to connect your phone to the network using

a PoE source.

To connect the phone using a PoE source:

1. Connect one end of the 25-foot Network Cable to the LAN jack on the

phone.

2. Connect the other end of the 25-foot Network Cable to an available LAN

port on the wall or hub/switch device port.

Note

AC power adapters are not included in the PoE package. If you require one, see

your system administrator.

25-foot Network Cable

User Guide for the Polycom SoundStation IP 6000 Phone

1 - 4

AC Power

To connect your phone to the network using AC power, make sure you have

the optional AC Power Kit. The AC Power Kit contains a Power Adapter,

Regional Power Cord, and a Power Insertion Cable.

The following figure shows how to connect your phone to the network using

optional AC power.

To connect the phone using AC power:

1. Connect one end of the 25-foot Network Cable to the LAN jack on the

phone.

2. Connect the other end of the 25-foot Network Cable to the

Power Insertion Cable.

3. Connect the Power Insertion Cable to an available LAN port on the wall

or hub/switch device port.

4. Connect the Power Adapter to the Power Insertion Cable.

5. Connect the Power Adapter (with the attached Regional Power Cord) to

the wall outlet.

Power Adapter

Power Insertion Cable

25-foot Network Cable

Getting Started with Your Phone

1 - 5

Connecting Optional Extension Microphones

To connect extension microphones to your phone, make sure you have the

optional External Microphone Kit. The External Microphone Kit contains two

extension microphones.

Connect the free end of the optional extension microphone cable to one of the

microphone connectors on the phone.

The following figure shows the optional extension microphones connected to

the microphone connectors on the phone.

Registering the Phone

Generally, your phone will be deployed with multiple other phones. In this

case, your system administrator will configure the phone parameters

beforehand, so that after you set up your phone, the phone will be registered

and ready to use.

If your phone is not part of a large phone deployment, your phone may not be

registered after you set it up. Before you use your phone, you or your system

administrator will have to register it.

For detailed information on how to register your phone after you install it, see

Quick Tip 44011: Register Standalone SoundPoint IP, SoundStation IP, and Polycom

VVX 1500 Phones, available at http://www.polycom.com/usa/en/support/

voice/soundpoint_ip/VoIP_Technical_Bulletins_pub.html

User Guide for the Polycom SoundStation IP 6000 Phone

1 - 6

Before You Use Your Phone

Before you use your phone, familiarize yourself with the phone’s features, the

icons that display on the screen, and how to navigate menus and enter data.

Features of the Phone

The following figure shows the primary hardware features of your phone

console.

Note

Since you can customize your phone in many different ways, and your system

administrator can enable and disable certain features, the user interface that

displays on your phone may differ from the figures that appear in this guide.

Getting Started with Your Phone

1 - 7

Feature Description

1 Speaker Allows for ringer and hands-free audio output.

2 Microphones

Provide 360

coverage by three internal

microphones.

3 LED Indicators Indicate phone and call status through three bi-color

LEDs. The LEDs illuminate to indicate the following

normal operational states:

• Solid red—A muted call

• Flashing red—A call is on hold

• Solid green—A dial-tone is available, dialing is

in-progress, or a call is in-progress

• Flashing green—An incoming call

User Guide for the Polycom SoundStation IP 6000 Phone

1 - 8

The following figure shows the primary key buttons, controls, and indicators

on your phone console:

Item Description

1 Select key Allows you to:

• Select a field of displayed data

• Toggle features on or off

2 Scroll keys Allow you to:

• Scroll through displayed information

• Enable or disable fields

From the idle screen, the scroll keys also allow

you to:

• View speed dial information (Up scroll key)

• View missed calls (Down scroll key)

3 Volume keys Adjust the volume of the speaker and the ringer.

Getting Started with Your Phone

1 - 9

4 Mute key Toggles the microphone on or off during a

conversation by doing the following:

• Stopping local audio from being heard at the

far end of the call

• Allowing local audio to be heard at the far end

of the call

5 Dial pad keys Contain 10 digits, 26 alphabetic characters, and

other special characters available in

context-sensitive applications.

6 Redial key Automatically dials the last number you called.

7 Call key Initiates or ends a call.

8 Soft keys Select specific context-sensitive functions that

display on the screen above each soft key.

Item Description

User Guide for the Polycom SoundStation IP 6000 Phone

1 - 10

9 Exit key Exits the current screen and returns to the

previous menu.

10 Menu key Allows you to:

• Access additional features and configuration

settings

• Exit the current screen and return to the idle

screen

11 LCD graphic display Shows the time and date, menus, and soft keys,

as well as information about calls, messages, and

features.

The information display line (the line that displays

the directory number) also displays icons and text,

such as:

• Popup text (like network error messages)

• Do Not Disturb text/icon (e.g., “Do Not

Disturb”)

• Call forwarding text/icon (e.g., “Call

Forwarding Enabled”)

• Missed call text (like “4 new missed calls”)

• Presence text (like “Busy”)

• Prompt text (like “Enter URL”)

• Time and date text

If there are multiple items to display, the items will

display in a scrolling fashion.

Item Description

Getting Started with Your Phone

1 - 11

Understanding Line and Call Icons

Icon Line or Call State Description

Active call using

Polycom

HD Voice™

technology

A call is in progress using Polycom HD Voice.

The active call icons merge into one icon on

the phone screen. The following figure shows

what displays on the screen during an active

call:

Active call not using

Polycom HD Voice

A call is in progress that does not use

Polycom HD Voice.

Conference A conference is in progress. See Hosting

Conference Calls on page 3-6.

Dialing The phone is dialing a number.

Do Not Disturb You have enabled the Do Not Disturb feature

on your phone. Your phone will not ring. See

Using Do Not Disturb on page 3-13.

Forwarding You have enabled the forwarding feature on

your phone. See Forwarding Calls on page

3-10.

Hold A call or conference is on hold. See Holding

and Resuming Calls on page 3-5 and Holding

and Resuming Conferences on page 3-8.

Registered line The phone can place and receive calls.

Registered shared line The phone, which shares a directory number

with another phone, can place and receive

calls. See Understanding Shared Lines on

page 2-26.

User Guide for the Polycom SoundStation IP 6000 Phone

1 - 12

Navigating Menus and Entering Data

To navigate menus and enter data, follow these tips:

Ringing The phone is ringing.

Unregistered Line The phone is unable to place and receive calls.

Voice mail message You have a new voice mail message. See

Using Voice Mail on page 3-16.

Icon Line or Call State Description

Note

After 20 seconds of inactivity, the menu system automatically exits to the idle

screen unless an edit session is in progress.

If you want to... Then do this...

Enter the main menu Press .

Exit the main menu and return

to the idle screen

Press .

Return to the previous menu Press .

In some cases, you can press the Back soft key

to return to the previous menu.

Scroll through menu items Use .

When lists appear on more than one page, you

can press the * key to Page Up, or press the #

key to Page Down.

Scroll through lists or fields Use or the Next and Prev soft keys.

Select a menu item Do one of the following:

• Scroll to the menu item, and then press

• Press the dial pad key that corresponds to

the item in the numbered menu list.

For example, to select the second item in a

menu, press 2.

Getting Started with Your Phone

1 - 13

Enter text Press the dial pad keys one or more times.

For example, to enter ‘A,’ press 2. To enter ‘C,’

press 222.

Enter numbers, uppercase

characters, or lowercase

characters

Press the

1/A/a soft key one or more times to

select numerical, uppercase, or lowercase

mode, and then press the dial pad keys one or

more times.

Enter special characters Do the following:

• Press the * and # keys one or more times.

• Press the 1/A/a soft key to select uppercase

or lowercase mode, and then press the 1 or

0 keys one or more times.

Enter text in a specific

language

Press the Encoding soft key.

When in text entry mode, the language the text

will display in appears at the top of the screen.

Enter a space Press the 0 key three times quickly.

Delete text you entered Press the << soft key.

View additional soft keys Press the More soft key.

Enable or disable fields Use or the Change soft key.

Enable or disable menu items Press .

If you want to... Then do this...

User Guide for the Polycom SoundStation IP 6000 Phone

1 - 14

2 - 1

Customizing Your Phone

You can customize your SoundStation IP 6000 conference phone by adjusting

certain settings, including language, volume, time and date, display contrast,

backlight intensity, and ring type. You can also add contacts to the phone’s

local Contact Directory.

This chapter shows you how to customize your phone. It includes the

following topics:

• Configuring Basic Settings on page 2-2

• Adjusting the Speaker and Ringer Volume on page 2-10

• Using Call Lists on page 2-10

• Managing Contacts on page 2-12

• Managing Incoming Calls on page 2-24

• Understanding Shared Lines on page 2-26

Some customizations, including shared lines and viewing a

Corporate Directory, must be set up by your system administrator.

To learn about your phone’s basic features, see Chapter 3, Using the Basic

Features of Your Phone. To read about the phone’s advanced features, see

Chapter 4, Using the Advanced Features of Your Phone.

For more information or assistance with your new phone, see your system

administrator.

User Guide for the Polycom SoundStation IP 6000 Phone

2 - 2

Configuring Basic Settings

To configure basic phone settings, press , and then select

Settings > Basic to view the basic phone settings you can customize.

This section includes the following topics:

• Updating Preferences

• Updating the Display Contrast

• Updating the Backlight Intensity

• Updating the Ring Tone

Updating Preferences

The Preferences menu allows you to customize the language that displays on

your phone and to specify how the time and date display on the idle screen.

You can also enable your phone to save Corporate Directory search results, if

Corporate Directory is set up on your phone (see Searching for Contacts in

Your Corporate Directory on page 2-20).

Updating the Language

The phone supports many languages. English (Internal) is the default

language that displays.

To change the language:

1. Press , and then select Settings > Basic > Preferences > Language.

The Language screen displays.

2. Scroll to the language you want, and then press .

The text on the screen changes to the language that you selected.

3. Press to return to the idle screen.

Customizing Your Phone

2 - 3

Updating the Time and Date Display

The time and date appear on the idle screen of your phone. If the phone cannot

obtain a time and date, the display will flash. If this happens, or if the time or

date is incorrect, see your system administrator.

You can select from various formats for the time and date display, including

whether the time or date displays first (clock order). You can also turn the time

and date display off, so the time and date does not display on the idle screen.

Select and set options that are right for you.

The following figure shows the default format for the date and time display on

the phone screen.

To update the time and date display:

1. Press , and then select Settings > Basic > Preferences >

Time and Date.

The Time and Date screen displays.

2. Do one of the following:

— To change the date format, press .

— To change the time format, scroll to Clock Time, and then press .

User Guide for the Polycom SoundStation IP 6000 Phone

2 - 4

The Clock Date screen or the Clock Time screen displays.

3. Scroll to the date or time format you want, and then press .

4. Press to return to the idle screen.

To change the order of the time and date display:

1. Press , and then select Settings > Basic > Preferences >

Time and Date > Clock Order.

The Clock Order screen displays.

2. Scroll to the clock order you want, and then press . The default

setting is date before time.

3. Press to return to the idle screen.

Customizing Your Phone

2 - 5

To enable or disable the time and date display:

1. Press , and then select Settings > Basic > Preferences >

Time and Date.

The Time and Date screen displays.

2. Do one of the following:

— To disable the time and date display, scroll to Disable.

— To enable the time and date display, you do not have to highlight an

item. Enable is already highlighted. Go to step 3.

3. Press .

4. Press to return to the idle screen.

Updating the Display Contrast

You can set how light or dark the screen appears.

To adjust the contrast on the phone screen:

1. Press , and then select Settings > Basic > Contrast.

The Contrast screen displays.

User Guide for the Polycom SoundStation IP 6000 Phone

2 - 6

2. Press the Up or Down soft keys to increase or decrease the display

contrast.

3. Press the Ok soft key.

4. Press to return to the idle screen.

Updating the Backlight Intensity

Backlight intensity on the phone has three components:

• Backlight On

• Backlight Idle

• Maximum Intensity

You can modify the Backlight On intensity and the Backlight Idle intensity

separately. You can select high, medium, low, and off levels for both.

When you modify the Maximum Intensity, you modify the entire backlight

intensity scale. For example, if you decrease the Maximum Intensity, the low,

medium, and high levels for both Backlight On and Backlight Idle intensities

decrease.

The Backlight On intensity applies to the following events:

• Any key press

• Incoming calls

• Ending a call, holding a call, resuming a call by the other party

• A voice message received

If you do not press any keys on the phone, after 20 seconds of the backlight

turning on, the backlight dims (or changes) to medium in the following cases:

• A call is in progress

• A call is on hold

• There is an incoming call (ringing)

• There is an outgoing call (ringing back)

• Any menu shows on the display

In all other cases, the Backlight Idle intensity applies.

Customizing Your Phone

2 - 7

To change the backlight intensity:

1. Press , and then select Settings > Basic > Backlight Intensity.

The Backlight Intensity screen displays.

2. Select Backlight On Intensity.

The Backlight On Intensity screen displays.

3. Scroll to the intensity you want, and then press . The default

Backlight On Intensity is High.

4. If you selected a new intensity, press the Save soft key. If you did not

select a new intensity, press .

5. Select Backlight Idle Intensity.

The Backlight Idle Intensity screen displays.

6. Scroll to the intensity you want, and then press . The default

Backlight Idle Intensity is Low.

7. If you selected a new intensity, press the Save soft key. If you did not

select a new intensity, press .

User Guide for the Polycom SoundStation IP 6000 Phone

2 - 8

8. Select Maximum Intensity.

The Maximum Intensity screen displays.

9. Press the Up or Down soft keys to increase or decrease the maximum

intensity the screen can display.

10. If you selected a new intensity, press the Ok soft key. If you did not select

a new intensity, press .

11. Press to return to the idle screen.

Updating the Ring Tone

You can select from many different ring tones to distinguish your phone from

your neighbor’s. You can also set distinctive ring tones for contacts in your

local directory so you can identify callers when your phone rings.

Selecting a Ring Tone

You can choose a unique ring tone for your phone to identify it when it rings.

To select a different ring tone:

1. Press , and then select Settings > Basic > Ring Type.

The Ring Type screen displays.

2. Scroll to the ring type you want. To hear the ring type before you select it,

press the Play soft key. The default ring type is Low Trill.

3. To select the ring type, press .

4. Press to return to the idle screen.

Customizing Your Phone

2 - 9

Setting Distinctive Ring Tones for Contacts

You can set a distinctive ring tone for each contact in your Contact Directory

so you can distinguish callers.

To set a distinctive ring tone for a local contact:

1. Press , and then select Features > Contact Directory.

The Directory screen displays.

2. Scroll to the contact for whom you want to assign a distinctive ring tone.

3. Press the Edit soft key.

The Edit Contact screen displays.

4. Use the Next soft key to scroll to Ring Type, and then enter a number

corresponding to one of the ring types available.

If a ring type is already assigned to the contact, but you want to change it,

press the << soft key to delete the existing ring type. Then, enter a number

corresponding to one of the ring types available.

5. Press the Save soft key.

6. Press to return to the idle screen.

Note

Your company’s settings may override this feature. For more information, contact

your system administrator.

Note

To exit this screen and determine the number associated with a ring type, press the

Menu key twice, and then select Settings > Basic > Ring Type. Each ring type

has a number associated with it.

User Guide for the Polycom SoundStation IP 6000 Phone

2 - 10

Adjusting the Speaker and Ringer Volume

To adjust the speaker volume:

During a call, press either or .

To adjust the ringer volume:

When the phone is in the idle state, press either or .

Using Call Lists

Your phone maintains lists of missed, received and placed calls. Each list can

hold up to 100 entries.

If you miss a call, the idle screen will display a message indicating the number

of missed calls you have. To view information about the missed call, view your

Missed Calls list (see Viewing Call Lists on page 2-10). After you view the

Missed Calls list, the message on the idle screen is removed.

The following figure shows what the idle screen looks like when you miss a

call.

Viewing Call Lists

You can access any call list from the Call Lists menu, or you can quickly access

missed calls from the idle screen.

To view a call list:

Do one of the following:

— Press , and then select Features > Call Lists > Missed Calls,

Received Calls, or Placed Calls.

— To quickly view the missed calls list, press from the idle screen.

Customizing Your Phone

2 - 11

Managing Call Lists

You can clear all the records in a call list, or just one record. You can also

choose a record in a list and return the call, store the call details in your local

Contact Directory, or view detailed information about the particular call.

To manage a call list:

1. Press , and then select Features > Call Lists.

The Call Lists screen displays.

2. Do one of the following:

— To clear the records in a call list, select Clear, and then scroll to either

Missed Calls, Received Calls or Placed Calls. Then, press .

The following figure shows the message that displays when you clear

a Missed Calls list.

— To view and manage a call list, scroll to either Missed Calls, Received

Calls, or Placed Calls, and then press . The call list information

displays.

Note

To manually clear all calls in all call lists, restart the phone. See Restarting the

Phone on page 4-10.

User Guide for the Polycom SoundStation IP 6000 Phone

2 - 12

The following figure shows a Placed Calls list.

To manage your call list (press the More soft key to view all these

options):

— To return the call, press the Dial soft key.

— To edit the phone number (if necessary) before you dial the

number or store the call details in your Contact Directory, press

the Edit soft key.

— To remove the call from the list, press the Clear soft key.

— To store the contact in your Contact Directory, press the

Save soft key.

— To view information about the call, such as the phone number, the

time and duration of the call, and the name of the caller, press the

Info soft key.

3. Press to return to the idle screen.

Managing Contacts

You can store a large number of contacts in your phone’s local

Contact Directory. Contact your system administrator for the exact number.

You can dial and search for contacts in this directory. You may be able to add,

edit, and delete contacts. Contact your system administrator to see if you have

read-only access to your local Contact Directory, or if you can update it.

If your system administrator sets up Corporate Directory on your phone, you

may also have read access to portions of your Corporate Directory. Your

system administrator determines which contacts you can see. You can search

for contacts in the Corporate Directory, and add contacts from the Corporate

Directory to your local Contact Directory. For more information, see Searching

for Contacts in Your Corporate Directory on page 2-20 and Adding Contacts

to Your Contact Directory from a Corporate Directory on page 2-18.

Note

You cannot update the contacts in your Corporate Directory. You can only search

for and dial contacts, and add contacts from your Corporate Directory to your local

Contact Directory.

Customizing Your Phone

2 - 13

Viewing Your Local Contact Directory

To view your local Contact Directory:

Press , and then select Features > Contact Directory.

The Directory screen displays, listing all the contacts in your directory. Scroll

to view all your contacts. You can use the # key to Page Down, and the * key

to Page Up.

Accessing Your Corporate Directory

When you access Corporate Directory, a search screen displays so you can

search for a specific contact. You can perform a quick search or an advanced

search.

To access your Corporate Directory:

1. Press , and then select Features > Corporate Directory.

The Corporate Directory search screen displays.

2. Search for the contact. (See Searching for Contacts in Your Corporate

Directory on page 2-20.)

Note

Each time you access Corporate Directory, the search screen displays, unless you

enable your phone to remember the last search you performed or the last person

you selected. To enable this feature, see Enabling Your Phone to Save Corporate

Directory Search Results on page 2-14.

Note

If you have enabled your phone to save the results of your last search (or

remember the last contact you selected), your previous search results (or the

contact), will display instead of a blank search screen. To enable this feature, see

Enabling Your Phone to Save Corporate Directory Search Results on page 2-14.

User Guide for the Polycom SoundStation IP 6000 Phone

2 - 14

Enabling Your Phone to Save Corporate Directory Search Results

You can enable your phone to save Corporate Directory search results, and to

remember the last person you viewed in the directory. Whenever you

re-display Corporate Directory, the results of your last search, or the last

person you selected, will display. If you don’t enable your phone to save

search results, each time you access Corporate Directory, a blank search screen

will display.

To enable your phone to save Corporate Directory search results:

1. Press , and then select Settings > Basic > Preferences >

Corporate Directory > View Persistency.

2. Scroll to Enabled, and then press .

3. Press .

4. Press to return to the idle screen.

Adding Contacts to Your Local Contact Directory

You can add contacts to your local Contact Directory in the following ways:

• Manually (if you have permission to update your local Contact Directory)

• From a call list

• From a Corporate Directory (if this is set up on your phone)

Note

You cannot update Corporate Directory from your phone.

Customizing Your Phone

2 - 15

Adding Contacts Manually

You can update your local Contact Directory manually, instead of importing

contact information from a call list or a Corporate Directory.

To add a contact manually:

1. Press , and then select Features > Contact Directory.

The Directory screen displays.

2. To add a contact to your phone’s database, press the Add soft key.

The Add To Directory screen displays.

3. Enter the contact information. To move between fields, use the Next and

Prev soft keys. Enter the following information:

— (Optional.) Enter the First Name and Last Name of the contact. (To

enter the contact’s name, see Navigating Menus and Entering Data on

page 1-12.)

You can enter a maximum of 32 characters.

— (Required.) Enter the Contact phone number.

You can enter a maximum of 32 characters. The phone number must

be unique, and must not already exist in the directory. If you save an

entry with a non-unique phone number, the entry will not be saved.

— (Optional.) Update the Speed Dial Index number.

The speed dial index number is automatically assigned to the next

available index value, up to a maximum value of 99. You can assign

any unused speed dial index number from 1 to 99.

Note

Your phone may not display all the following fields. For more information, see your

system administrator.

User Guide for the Polycom SoundStation IP 6000 Phone

2 - 16

If you assign a speed dial index number that is already taken, the

message “Speed dial index already exists” displays. If you enter an

invalid speed dial index number (for example, 0 or 00), the message

“Speed dial index is invalid” displays.

For more information on speed dial index numbers, see Managing

Speed Dial Entries on page 3-14.

— (Optional.) Enter a Label for the contact. You can enter a maximum of

32 symbols, letters, or numbers.

If you specify a label, the label will be the first item that displays for

the contact in the Contact Directory and on the Speed Dial Info screen

(before the contact’s first and last names, if specified). For example, in

the following figures, Ann Brown has been assigned the label “Sales.”

— (Optional.) Set the Ring Type.

For information on setting the ring type, see Updating the Ring Tone

on page 2-8.

— (Optional.) Assign a Divert Contact.

The Divert Contact identifies the third party to which you want this

contact’s calls sent. You can enter a maximum of 32 characters.

— (Optional.) Change the Auto Reject and Auto Divert settings.

If you set the Auto Reject field to enabled, each time the contact calls,

the call will be directed to your voice mail system (if a voice mail

system is set up). If you set the Auto Divert field to enabled, each time

the contact calls, the call will be directed to a third party you specify

in the Divert Contact field.

Use the scroll keys or the Change soft key to switch between the

Enabled and Disabled settings for the Auto Reject and Auto Divert

fields.

Note

If you do not have a voice mail system set up, enabling the Auto Reject field will

have no effect. Each time the contact calls, your phone will ring (unless you choose

to divert the contact’s calls, or enable call forwarding or Do Not Disturb on your

phone).

Customizing Your Phone

2 - 17

— (Optional.) Change the Watch Buddy and Block Buddy settings.

If you set the Watch Buddy field to enabled, you can monitor the

contact’s status. If you set the Block Buddy field to enabled, the contact

cannot monitor your status. For more information on monitoring

status, see Using Buddy Lists on page 4-2.

Use the scroll keys or the Change soft key to switch between the

Enabled and Disabled settings for the Watch Buddy and Block Buddy

fields.

4. Press the Save soft key.

5. Press to return to the idle screen.

Adding Contacts from Call Lists

You can save call information from a call list to your local Contact Directory.

To add a contact to the local Contact Directory from a call list:

1. Do one of the following:

— To select a call list, press , and then select Features > Call Lists >

Missed Calls, Received Calls, or Placed Calls.

— To quickly see a list of missed calls, press from the idle screen.

2. Scroll to the contact’s call.

To scroll through a list of contacts, use the * key to Page Up and the # key

to Page Down.

3. To save the contact to your Contact Directory, press the Save soft key.

The following figure shows the message that displays when you save a

contact to your Contact Directory.

If the contact already exists in your Contact Directory, “Contact already

exists” displays.

4. Press to return to the idle screen.

Note

You may want to go to the Contact Directory to see if the contact was saved

correctly and to add any missing contact information. To view your Contact

Directory, see Managing Contacts on page 2-12. To update missing contact

information, see Adding Contacts Manually (step 3) on page 2-15.

User Guide for the Polycom SoundStation IP 6000 Phone

2 - 18

Adding Contacts to Your Contact Directory from a Corporate Directory

You can save any contact listed in your Corporate Directory (if it is set up on

your phone) to your local Contact Directory.

To add a contact to your Contact Directory from a Corporate Directory:

1. Press , and then select Features > Corporate Directory.

The Corporate Directory search screen displays.

2. Search for the contact, or scroll to the contact’s entry.

For information on how to search for a contact, see Searching for Contacts

in Your Corporate Directory on page 2-20.

3. Press the View soft key.

The Contact screen displays.

4. To save the contact to the local Contact Directory, press the Save soft key.

“Saved” displays on the screen. Only the first name, last name, and phone

number are saved.

If the contact already exists in your local Contact Directory,

“Contact already exists” displays.

5. Press to return to the idle screen.

Note

If you have enabled your phone to save the results of your last search (or

remember the last contact you selected), your previous search results (or the

contact), will display instead of a blank search screen. To enable this feature, see

Enabling Your Phone to Save Corporate Directory Search Results on page 2-14.

Note

You may want to go to the Contact Directory to see if the contact was saved

correctly and to add additional contact information. To view your Contact Directory,

see Managing Contacts on page 2-12. To update contact information, see Adding

Contacts Manually (step 3) on page 2-15.

Customizing Your Phone

2 - 19

Searching for Contacts

You can search for contacts in your local Contact Directory, or in a

Corporate Directory (if this is set up on your phone).

Searching for Contacts in Your Local Contact Directory

Search for a contact by scrolling through the directory, or entering specific

search criteria.

To search for a contact in the local Contact Directory:

1. Press , and then select Features > Contact Directory.

The Directory screen displays.

2. Press the Search soft key. Then, enter the first few characters of the

contact’s first or last name, and then press the Search soft key again.

The Directory Search screen displays a list of successful matches.

3. Scroll to the contact you are searching for.

You can dial, edit, or delete the contact.

4. Press to return to the idle screen.

User Guide for the Polycom SoundStation IP 6000 Phone

2 - 20

Searching for Contacts in Your Corporate Directory

Search for a contact by entering specific search criteria.

To search for a contact in the Corporate Directory:

1. Press , and then select Features > Corporate Directory.

The Corporate Directory search screen displays.

2. Perform a quick search or an advanced search.

A quick search allows you to search using the contact’s last name (if the

directory is alphabetized by last name) or first name (if the directory is

alphabetized by first name). An advanced search uses any combination of

the contact’s first and last names, phone numbers, address, and title.

Do one of the following:

— To perform a quick search, next to “Search (Filtered),” enter the first

few characters of the contact’s first or last name (depending on how

the directory is organized), and then press the Submit soft key. The

screen displays a list of contacts, starting with any successful matches.

— To perform an advanced search, press the AdvFind soft key.

Note

You can enable your phone to save Corporate Directory search results, and to

remember the last person you viewed in the directory. Whenever you re-display

Corporate Directory, the last search you performed will display, or the last person

you selected will display. To enable this feature, see Enabling Your Phone to Save

Corporate Directory Search Results on page 2-14.

Note

If you have enabled your phone to save the results of your last search (or

remember the last contact you selected), your previous search results (or the

contact), will display instead of a blank search screen. To enable this feature, see

Enabling Your Phone to Save Corporate Directory Search Results on page 2-14.

Customizing Your Phone

2 - 21

The Advanced Find screen displays.

Enter your search criteria, and then press the Submit soft key. The

screen displays any successful matches.

3. Press to return to the idle screen.

Updating Contacts in Your Local Contact Directory

You can update contact information for contacts in your local Contact

Directory. You cannot update information for contacts in your Corporate

Directory.

To update a contact in your local Contact Directory:

1. Press , and then select Features > Contact Directory.

The Directory screen displays.

2. Scroll to the contact whose information you want to update, or search for

the contact (see Searching for Contacts in Your Local Contact Directory

on page 2-19).

To scroll through a list of contacts, use the * key to Page Up and the # key

to Page Down.

Note

If you want to erase all your search criteria and enter new criteria before you submit

your search, press the Clear soft key.

User Guide for the Polycom SoundStation IP 6000 Phone

2 - 22

3. Press the Edit soft key.

The Edit Contact screen displays.

4. Update the contact information. Use the Next and Prev soft keys to scroll

between fields.

For information on the fields you can update, see Adding Contacts

Manually

(step 3) on page 2-15.

5. Press the Save soft key.

6. Press to return to the idle screen.

Deleting Contacts from Your Local Contact Directory

You can delete contacts from your local Contact Directory, but not from your

Corporate Directory.

To delete a contact from the local Contact Directory:

1. Press , and then select Features > Contact Directory.

The Directory screen displays.

2. Scroll to the contact you want to delete. Or, search for the contact (see

Searching for Contacts in Your Local Contact Directory on page 2-19).

To scroll through a list of contacts, use the * key to Page Up and the # key

to Page Down.

3. Press the Delete soft key.

The contact is deleted from the directory.

4. Press to return to the idle screen.

Customizing Your Phone

2 - 23

Placing Calls to Contacts

You can place calls to contacts from your local Contact Directory or from your

Corporate Directory (if this is set up on your phone).

To place a call to a contact in the local Contact Directory:

1. Press , and then select Features > Contact Directory.

The Directory screen displays.

2. Scroll to the contact you want to call. Or, search for the contact (see

Searching for Contacts in Your Local Contact Directory on page 2-19).

To scroll through a list of contacts, use the * key to Page Up and the # key

to Page Down.

3. Press the Dial soft key.

To place a call to a contact in the Corporate Directory:

1. Press , and then select Features > Corporate Directory.

The Corporate Directory search screen displays.

2. Scroll to the contact you want to call. Or, search for the contact (see

Searching for Contacts in Your Corporate Directory on page 2-20).

To scroll through a list of contacts, use the * key to Page Up and the # key

to Page Down.

3. Press the Dial soft key.

Note

If you have enabled your phone to save the results of your last search (or

remember the last contact you selected), your previous search results (or the

contact), will display instead of a blank search screen. To enable this feature, see

Enabling Your Phone to Save Corporate Directory Search Results on page 2-14.

User Guide for the Polycom SoundStation IP 6000 Phone

2 - 24

Managing Incoming Calls

You can manage incoming calls from the contacts in your Contact Directory by

doing the following:

• Setting up a distinctive ring tone for a contact.

• Rejecting calls from a particular contact by sending the call to your

voice mail system. (If you do not have a voice mail system set up, the call

will still ring on your phone.)

• Diverting calls from a particular contact to another party.

Distinguishing Calls

You can customize your phone so that you can distinguish callers by certain

ring tones. For information on setting a distinctive ring tone for a particular

contact, see Setting Distinctive Ring Tones for Contacts on page 2-9.

Rejecting Calls

You can customize your phone so that incoming calls from a particular party

are immediately sent to your voice mail system. (If you do not have a voice

mail system set up, the call will still ring on your phone.)

To send incoming calls from a particular contact directly to voice mail:

1. Press , and then select Features > Contact Directory.

The Directory screen displays.

2. Scroll to the contact. Or, search for the contact (see Searching for Contacts

in Your Local Contact Directory on page 2-19).

To scroll through a list of contacts, use the * key to Page Up and the # key

to Page Down.

Note

Rejecting calls is not available on shared lines.

Customizing Your Phone

2 - 25

3. Press the Edit soft key.

The Edit Contact screen displays.

4. Use the Next soft key to scroll to the Auto Reject field, and then change

the Auto Reject setting to Enabled. Use the scroll keys or the Change soft

key to select Enabled.

5. Press the Save soft key.

6. Press to return to the idle screen.

Diverting Calls

You can customize your phone so that incoming calls from a particular party

are transferred directly to a third party.

To divert incoming calls from a contact to a third party:

1. Press , and then select Features > Contact Directory.

The Directory screen displays.

2. Scroll to the contact for whom you want to transfer calls. Or, search for

the contact (see Searching for Contacts on page 2-19).

To scroll through a list of contacts, use the * key to Page Up and the # key

to Page Down.

User Guide for the Polycom SoundStation IP 6000 Phone

2 - 26

3. Press the Edit soft key.

The Edit Contact screen displays.

4. Use the Next soft key to scroll to the Divert Contact field, and then enter

the number of the party to whom you want to divert the call.

You can enter a maximum of 32 characters.

5. Use the Next soft key to scroll to the Auto Divert field, and then change

the Auto Divert setting to Enabled. Use the scroll keys or the Change soft

key to select Enabled.

6. Press the Save soft key.

7. Press to return to the idle screen.

Understanding Shared Lines

If two phones share a line, an incoming call to one number will cause both

phones to ring. The call can be answered by either phone, but not both. If your

phone shares a line, a shared line icon that is half black and half grey displays

on the screen.

The following figure shows the shared line icon at the top left of the screen.

The shared line icon changes to a moving icon, and the console’s LEDs glow a

steady red, when the line is in use remotely.

Calls on shared lines can be transferred, put on hold, or added to a conference.

You cannot forward or reject calls on shared lines.

For information on answering calls with shared lines, see Answering Calls on

page 3-4.

Note

Shared lines is an optional feature that your system administrator sets up. Your

system may not support it. For more information, contact your system administrator.

3 - 1

Using the Basic Features of Your

Phone

Your SoundStation IP 6000 conference phone is designed to be used like a

regular conference phone on a public switched telephone network (PSTN).

You can place calls, transfer a call to someone else, conduct a multi-party

conference call, or perform other basic and more advanced functions.

At any time, only one active call may be in progress on your phone. The active

call is the one that has audio associated with it. In addition to an active call,

your phone can handle up to seven other calls, including conference calls, on

hold. Your phone can handle a total of eight calls at one time.

This chapter provides introductory information and basic operating

instructions for the phone. It includes the following topics:

• Placing Calls on page 3-2

• Answering Calls on page 3-4

• Ending Active Calls on page 3-4

• Muting the Microphone on page 3-4

• Redialing Numbers on page 3-5

• Holding and Resuming Calls on page 3-5

• Hosting Conference Calls on page 3-6

• Transferring Calls on page 3-9

• Forwarding Calls on page 3-10

• Using Do Not Disturb on page 3-13

• Managing Speed Dial Entries on page 3-14

• Using Voice Mail on page 3-16

For information on the advanced features of your phone, see Chapter 4, Using

the Advanced Features of Your Phone.

User Guide for the Polycom SoundStation IP 6000 Phone

3 - 2

Placing Calls

You can place a call off-hook (with a dial tone), or on-hook (without a dial

tone). If you place a call off-hook, you have the option of dialing a contact

using a URL or IP address, if this feature is enabled for your phone. You can

also place calls (on-hook and off-hook) using speed dial numbers (see Placing

Calls Using Speed Dials on page 3-3).

The phone displays the duration of active calls on the phone screen. The

following figure shows an active call to Jane Smith at directory number 1951

that has lasted for nine seconds.

To place a call off-hook (to dial a phone number, IP address, or URL):

1. To obtain a dial tone, press or the New Call soft key.

2. Do one of the following:

— To dial a phone number, enter the phone number of the party you

want to call.

— To dial an IP address or URL, press the URL soft key, and then enter

the IP address or URL of the party you want to call.

To enter the number and letters displayed on a key, press the key one

or more times quickly.

To enter “@”, press the # key. To enter “.”, press the * key.

3. Press the Send soft key.

To place a call on-hook (to dial a phone number):

Enter the phone number of the party you want to call, and then press the

Dial soft key.

Note

Placing calls using an IP address or URL may not be enabled for your phone. For

more information, see your system administrator.

Note

When you dial a URL, the maximum number of characters you can enter is 32.

Using the Basic Features of Your Phone

3 - 3

Placing Calls Using Speed Dials

Use a speed dial index number for quick dialing. Speed dial index numbers are

associated with entries in your Contact Directory. For information on

managing speed dial entries from your Contact Directory, see Managing

Speed Dial Entries on page 3-14.

To place a call using a speed dial index number:

1. Press .

The Speed Dial Info screen displays.

2. Do one of the following:

— If you know the contact’s speed dial index number, enter the number.

— If you do not know the contact’s speed dial index number, scroll to the

contact, and then press the Dial soft key.

The call is placed.

Note

Instead of entering a phone number from memory, you can access call lists,

directories, and speed dial lists to display and dial the number for you.

• To access a call list, press the Menu key, and then select Features >

Call Lists > Missed Calls, Received Calls, or Placed Calls. Scroll to the call

you want to dial, and then press the Dial soft key. For more information, see

Using Call Lists on page 2-10.

• To access your Contact Directory or Corporate Directory (if enabled for your

phone), press the Menu key, and then select Features > Contact Directory or

Corporate Directory. Scroll to or search for the contact you want to dial, and

then press the Dial soft key. For more information, see Managing Contacts on

page 2-12.

• To place a call using a speed dial index number, press the Up scroll key, scroll

to the party you want to call, and then press the Dial soft key. For more

information on other ways to use speed dial, see Placing Calls Using Speed

Dials on page 3-3.

User Guide for the Polycom SoundStation IP 6000 Phone

3 - 4

Answering Calls

To answer a call:

Press or the Answer soft key.

The three LEDs flash green when the phone rings.

To answer a call on a shared line:

1. Answer the incoming call.

2. Press the Hold soft key.

Anyone on another phone configured to use the same shared line can take the

call by selecting the call on their phone screen.

Ending Active Calls

To end a call:

Press or the End Call soft key.

Muting the Microphone

To mute the microphone:

During a call, press .

The three console LEDs glow red to indicate that the other party (or parties)

cannot hear you. You can still hear all other parties while Mute is enabled.

To turn off the Mute feature, press again.

Note

To ignore Incoming calls, press the Reject soft key (for private lines) or the

Silence soft key (for shared lines). To prevent your phone from ringing, enable the

Do Not Disturb feature (see Using Do Not Disturb on page 3-13).

You can forward incoming calls by pressing the Forward soft key (see

Forwarding Calls Dynamically on page 3-13).

If you set up your phone with a silent ring, press the Answer soft key to answer the

call.

Note

You cannot end a call that is on hold until you resume the call. To end a call on hold,

press the Resume soft key, and then end the call.

Using the Basic Features of Your Phone

3 - 5

To mute the microphone if you use external microphones:

Press on the phone or the button on the top of the external

microphones.

To turn off the Mute feature, press again.

Redialing Numbers

You can redial the last number you dialed, or search a list of placed calls to find

a previously-dialed number.

To redial the last number dialed:

Press .

To redial a previously dialed number:

1. Press , and then select Features > Call Lists > Placed Calls.

The Placed Calls screen displays.

2. Scroll to the number you want to redial, and then press the Dial soft key.

Holding and Resuming Calls

You can place up to eight calls on hold on your phone.

(For information on placing conference calls on hold, see Holding and

Resuming Conferences on page 3-8.)

User Guide for the Polycom SoundStation IP 6000 Phone

3 - 6

To place a call on hold:

During a call, press the Hold soft key. The console LEDs flash red to

indicate that a call is on hold.

The following screen shows Jane Smith on hold. The Resume soft key now

displays on the screen.

To resume a call on hold:

While a call is on hold, press the Resume soft key.

Hosting Conference Calls

You can create a conference with up to two other parties using the phone’s

local conference feature. To quickly set up a conference, you can use the

Join soft key to create a conference between an active call and a call on hold.

After you set up a conference, you can hold the conference call, split the

conference call into individual calls on hold, or end the conference call (and

your connection to the conference call participants).

This section includes the following topics:

• Setting Up Conferences on page 3-6

• Holding and Resuming Conferences on page 3-8

• Splitting Conferences on page 3-8

• Ending Conferences on page 3-9

Setting Up Conferences

You can set up a conference in one of two ways:

• Using the Confrnc soft key.

• Using the Join soft key, if you have an active call and a call on hold.

Note

To end a call on hold, you must resume the call first.

Using the Basic Features of Your Phone

3 - 7

Setting Up a Conference Using the Conference Soft Key

To set up a conference using the Conference soft key:

1. Call the first party. See Placing Calls on page 3-2.

2. Press the Confrnc soft key. The active call is placed on hold.

3. Enter the number of the second party, and then press the Send soft key.

4. When the second party answers, press the Confrnc soft key to join all

parties in the conference.

The Active:Conference screen displays.

Setting Up a Conference with an Active Call and a Call on Hold

If you are currently in an active call, and you have another call on hold, you

can create a conference call between the active call, the call on hold, and

yourself, by pressing the Join soft key.

To set up a conference call with an active call and a call on hold:

If you have an active call and a call on hold, scroll to either call, and then

press the Join soft key.

The Active:Conference screen displays.

A conference is created with the active call, the call on hold, and yourself.

Note

If configured for single key-press conferences, the conference participant hears the

dial tone and ringback when the conference host places the call to the new party.

Note

If configured for single key-press conferences, you do not have to press the

Confrnc soft key again.

User Guide for the Polycom SoundStation IP 6000 Phone

3 - 8

Holding and Resuming Conferences

When you place a conference call on hold, you place all other conference

participants on hold.

To place a conference call on hold:

From the Active:Conference screen, press the Hold soft key.

The Hold:Conference screen displays. The other parties in the conference call

are put on hold.

From the Hold:Conference screen, you can do the following:

• To resume the conference call, press the Resume soft key. The

Active:Conference screen will display again.

• To place a call to a new party, press the New Call soft key. The conference

remains on hold, and the new call becomes the active call.

• To end the conference call and split the conference into two separate calls

on hold, press the Split soft key.

Splitting Conferences

When a conference has been established, a Split soft key is available. When

you split a conference, you end the conference and put all parties on hold.

To split a conference:

From the Active:Conference screen, press the Split soft key.

The conference ends, and all calls are split into individual calls and put on

hold.

Using the Basic Features of Your Phone

3 - 9

Ending Conferences

You can end a conference, and your connection to the other parties, by

pressing the End Call soft key. When you use the End Call soft key, the other

parties remain connected.

To end a conference:

From the Active:Conference screen, press the End Call soft key.

The two other parties remain connected.

Transferring Calls

A call can be transferred in one of three ways:

• Consultative transfer—You have the option of either talking to the party

to whom you are transferring the call, or you can choose not to talk to the

party, and complete the transfer when you hear the party’s ring-back

sound.

— Performing a Consultative Transfer on page 3-9.

• Blind transfer—The call is automatically transferred after you dial the

number of the party to whom you want to transfer the call. You do not

have the option of talking to the party.

— Performing a Blind Transfer on page 3-10.

• Attended transfer—The parties are automatically connected to each other

after you exit a conference.

— Set up a conference call and then end your participation. For more

information, see Setting Up Conferences on page 3-6 and Ending

Conferences on page 3-9.

Performing a Consultative Transfer

Perform a consultative transfer if you want to talk to the party to whom you

are transferring the call. Or, you can choose not to talk to the party. In this case,

you wait for the party’s ring-back sound, and then transfer the call.

To transfer a call:

1. During a call, press the Trnsfer soft key. The active call is placed on hold.

2. Place a call to the party to whom you want to transfer the call. See Placing

Calls on page 3-2.

User Guide for the Polycom SoundStation IP 6000 Phone

3 - 10

3. When you hear the ring-back sound, press the Trnsfer soft key. The

transfer is complete.

If you want to talk privately to the person to whom you are transferring

the call before the transfer is complete, wait until the person answers the

call, talk to the person, and then press the Trnsfer soft key.

To cancel the transfer before the call connects, press the Cancel soft key.

Performing a Blind Transfer

When you use a blind transfer, you transfer a call without speaking to the

party to whom you are transferring the call. The call is automatically

transferred as soon as you dial the party’s number.

To perform a blind transfer:

1. During a call, press the Trnsfer soft key.

The following screen, with the Blind soft key, displays.

2. Press the Blind soft key, and then place a call to the party to whom you

want to transfer the call. See Placing Calls on page 3-2.

(If you want to cancel the transfer before the call is placed, and return to

the original call, press the Cancel soft key.)

The call automatically transfers to the party you specified.

Forwarding Calls

You can set up your phone to forward incoming calls to another party (static

forwarding), or you can forward a call as your phone rings (dynamic

forwarding). Your phone will forward calls even if you enable the Do Not

Disturb Feature.

You can also reject calls from a particular contact (by sending the call to your

voice mail system), or divert calls from a particular contact to another party.

For more information, see Managing Incoming Calls on page 2-24.

Note

Your company’s settings may override this feature. For more information, contact

your system administrator.

Call forwarding is not available on shared lines.

Using the Basic Features of Your Phone

3 - 11

To access forwarding options:

Do one of the following:

— Press , and then select Features > Forward.

— From the idle screen, press the Forward soft key.

Forwarding Calls Statically

You can set up your phone to forward calls to another number.

To forward calls to another extension:

1. From the idle screen, press the Forward soft key.

The Forwarding Type Select screen displays.

2. Scroll to the forwarding type you want, and then press . The

options are:

— Always—To forward all incoming calls.

—No Answer—To forward all unanswered incoming calls.

—Busy—To forward calls that arrive when you are already in a call.

3. Do one of the following:

— If you selected Always, the Call Forward Always screen displays.

Enter a number to forward all incoming calls to.

User Guide for the Polycom SoundStation IP 6000 Phone

3 - 12

— If you selected No Answer, the Call Forward No Answer screen

displays.

Do the following (use the Next and Prev soft keys to move between

fields):

a In the Contact field, enter a number to forward all unanswered

incoming calls to.

b In the Forward After Rings field, enter how many rings to wait

before forwarding the call (one ring is approximately six seconds).

Two rings is the recommended value.

— If you selected Busy, the Call Forward Busy screen displays.

Enter a number to forward all future incoming calls to when you are

already in another call.

4. Press the Enable soft key.

If you selected the forwarding type Always, a moving arrow displays on the

idle screen next to the directory number.

To disable call forwarding:

1. From the idle screen, press the Forward soft key.

The Forwarding Type Select screen displays, showing the forwarding type

that is enabled.

The following screen shows the forwarding type “Always” enabled.

Using the Basic Features of Your Phone

3 - 13

2. Scroll to the forwarding type you want to change, and then press .

A screen displays showing the details of the forwarding type you want to

disable.

3. To turn off call forwarding, press the Disable soft key.

Forwarding Calls Dynamically

You can manually forward a call to another number while your phone rings.

To forward an incoming call to another extension:

1. While your phone rings, press the Forward soft key.

The Call Forwarding screen displays.

2. Enter the number to forward the incoming call to.

Your phone displays the last number you forwarded calls to (either

statically or dynamically). If you previously set a forwarding number and

want to enter a new one, use the << soft key to delete the number.

3. Press the Forward soft key.

The incoming call is forwarded to the other party. If call forwarding is

disabled, future calls will not be forwarded and forwarding remains disabled.

Using Do Not Disturb

To prevent your phone from ringing, activate the Do Not Disturb feature.

Calls you receive while Do Not Disturb is enabled will display in your

Missed Calls Call List (see Using Call Lists on page 2-10). If you have chosen

to forward your calls to another number, calls will be sent to that number if Do

Not Disturb is enabled.

User Guide for the Polycom SoundStation IP 6000 Phone

3 - 16

Using Voice Mail

Your voice mail is saved in a centralized location and may be accessed from

your phone. Your phone may indicate voice mail by the following:

• An icon, , on the phone screen

• A stutter dial tone instead of a normal dial tone

To listen to voice mail messages:

1. Press , and then select Features > Messages > Message Center.

The Messages screen displays, indicating the number of urgent, new, and

old messages you have.

2. To listen to your voice mail, press the Connect soft key, and then follow

the voice or visual prompts on the screen.

3. Press to return to the idle screen.

Note

Voice mail is an optional feature that your system administrator sets up. Your

system may not support it. For more information, contact your system administrator.

Screen options may vary with your application. Voice mail may be accessible with a

single key press. Contact your system administrator about this option.

User Guide for the Polycom SoundStation IP 6000 Phone

4 - 4

3. Press the Edit soft key.

The Edit Contact screen displays.

4. Use the Next and Prev soft keys to scroll to the Watch Buddy field, and

then use the scroll keys or the Change soft key to choose Enabled or

Disabled.

When Watch Buddy is enabled, the contact is added to your buddy list and

you can monitor the contact’s status. When Watch Buddy is disabled, the

contact is removed from your buddy list and you cannot monitor the

contact’s status.

The default for Watch Buddy is Disabled.

5. Press the Save soft key.

6. Press to return to the idle screen.

Blocking Contacts from Viewing Your Status

Block a contact in your Contact Directory if you don’t want the contact to view

your status. If you unblock a contact, the contact can add you to their buddy

list and view your status. You can also use your Blocked List to unblock

contacts (see Using Your Blocked List to Unblock Contacts on page 4-6).

Note

To view a list of contacts that can and cannot monitor your status, do the following:

• To view contacts that cannot view your status, press the Menu key, and then

select Features > Presence > Blocked List.

• To view contacts that can view your status, press the Menu key, and then select

Features > Presence > Watcher List.

Using the Advanced Features of Your Phone

4 - 5

To block or unblock a contact:

1. Press , and then select Features > Contact Directory.

The Directory screen displays.

2. Scroll to the contact. Or, search for the contact (see Searching for Contacts

in Your Local Contact Directory on page 2-19).

To scroll through a list of contacts, use the * key to Page Up and the # key

to Page Down.

3. Press the Edit soft key.

The Edit Contact screen displays.

4. Use the Next and Prev soft keys to scroll to the Block Buddy field, and

then use the scroll keys or the Change soft key to choose Enabled or

Disabled.

When Block Buddy is enabled, the contact cannot watch your phone. The

contact will display in your Blocked List.

When Block Buddy is disabled, the contact can watch your phone. The

contact will display in your Watcher List.

The default for Block Buddy is Disabled.

5. Press the Save soft key.

6. Press to return to the idle screen.

User Guide for the Polycom SoundStation IP 6000 Phone

4 - 6

Using Your Blocked List to Unblock Contacts

Use the Blocked List to quickly unblock a contact, rather than updating the

Block Buddy setting for the contact in your Contact Directory.

To use your Blocked List to unblock a contact:

1. Press , and then select Features > Presence > Blocked List.

The Blocked List screen displays.

2. Scroll to the contact.

3. Press the Unblock soft key.

4. Press to return to the idle screen.

The contact can now watch your phone. The contact will display in your

Watcher List. (To view your Watcher List, press the Menu key, and then select

Features > Presence > Watcher List.)

Monitoring the Status of Contacts in Your Buddy List

You can monitor the status of all the contacts in your buddy list, except those

contacts that have blocked you from viewing their status. (To add contacts to

your buddy list, see Selecting Contacts to Monitor on page 4-3.)

To monitor a contact in your buddy list:

Do one of the following:

— From the idle screen, press the Buddies soft key.

— Press , and then select Features > Presence > Buddy Status.

The Buddy Status screen displays, listing the status of all your buddies.

From this screen, you can scroll to and dial the contact.

Using the Advanced Features of Your Phone

4 - 7

Integrating with Microsoft Office Live Communications Server 2005

Your system administrator can configure your phone to work with Microsoft

Office Live Communications Server 2005 and communicate with others using

Microsoft Office Communicator and Windows Messenger. From your phone,

you can invite, join, control, and monitor integrated multipoint conferences.

Any contact added through your buddy list will appear as a contact in

Microsoft Office Communicator and Windows Messenger. Any contact added

as a contact in Microsoft Office Communicator and Windows Messenger will

appear in your buddy list. You can access your Privacy List on the phone to

allow or disallow your contacts from monitoring your presence.

To view and change your presence, see Updating Presence Settings on page

4-2. For more information on integrating with Microsoft Office Live

Communications Server 2005, contact your system administrator.

To add a contact to your buddy list:

1. Press , and then select Features > Presence > Buddy Status.

2. Press the Add soft key.

3. Enter the phone number of the contact.

4. Press the Submit soft key.

5. Press to return to the idle screen.

To view and change your privacy list:

1. Press , and then select Features > Presence > Buddy Status >

Privacy List.

2. Scroll to the contact.

3. Press the Edit soft key.

4. Scroll to Access, and then use the scroll keys to select Enabled.

When Access is enabled, you allow the contact to see your presence. When

Access is disabled, you prevent the contact from viewing your presence.

The default for Access is Disabled.

5. Press to return to the idle screen.

For more information on contacting buddies, see the Microsoft Office

Communicator and Windows Messenger documentation.

User Guide for the Polycom SoundStation IP 6000 Phone

4 - 8

Using Instant Messaging

You can send and receive instant messages using your phone. Your phone

may indicate instant messages by the following:

• An icon, , on the phone screen

• A stutter dial tone instead of a normal dial tone

Managing Instant Messages

From the Instant Messages screen, you can view instant messages, delete a

message, or create a new message. Messages display in the order they are

received (the first message received displays first).

To manage instant messages:

1. Press , and then select Features > Messages > Instant Messages.

2. From the Instant Messages screen, you can do the following:

— To view instant messages, press the Next or Prev soft keys to cycle

through the messages in order.

— To delete a message, press the Next or Prev soft keys to scroll to the

message, and then press the Delete soft key.

— To create a new message, press the New soft key. (See Sending Instant

Messages on page 4-9.)

Note

Instant Messaging is an optional feature that your system administrator enables.

Your system may not support it. For more information, contact your system

administrator.

Using the Advanced Features of Your Phone

4 - 9

Sending Instant Messages

To send an instant message:

1. Press , and then select Features > Messages > Instant Messages.

The Instant Messages screen displays.

2. Do one of the following:

— To send a message, press the New soft key.

Enter the phone number or IP address, and then press the Ok soft key.

Or, to enter a URL, press the 1/A/a soft key to select uppercase or

lowercase mode, enter the URL, and then press the Ok soft key.

(To enter special characters, see Navigating Menus and Entering Data

on page 1-12.)

— To reply to a message, press the Next or Prev soft keys to select a

message. Then, press the Reply soft key.

The Instant Messages screen displays. The phone number or URL you

entered or selected displays on the screen.

3. Do one of the following:

— To choose from various pre-scripted short messages, press the Select

soft key. From the Message Select screen, scroll to the message you

want.

— To compose a custom message, press the Edit soft key. Then, enter

your message. (To enter a message, see Navigating Menus and

Entering Data on page 1-12.)

4. Press the Send soft key.

5. Press to return to the idle screen.

User Guide for the Polycom SoundStation IP 6000 Phone

4 - 10

Restarting the Phone

Periodically, you may need to restart your phone so your phone can accept a

new configuration.

To restart the phone:

1. Press , and then select Settings > Basic > Restart Phone.

The Restart Phone screen displays. The message “Are you sure?” displays.

2. If you still want to restart the phone, press the Yes soft key.

The restart process begins. The process ends when the idle screen displays.

Note

If your phone malfunctions, you may be able to restore normal operation without

restarting it. Before you restart your phone, contact your system administrator.

Note

Call lists are automatically cleared when you restart your phone.

5 - 1

Troubleshooting Your Phone

This chapter contains general troubleshooting information to help you solve

any problems you might encounter when you use the SoundStation IP 6000

conference phone. The tables in this chapter list possible trouble symptoms,

the likely causes of these problems, and recommended corrective actions to

take. Problems are grouped as follows:

• Installation Configuration on page 5-2

• Power and Startup on page 5-2

• Controls on page 5-3

• Access to Screens and Systems on page 5-4

• Calling on page 5-5

• Displays on page 5-6

• Audio on page 5-6

• Productivity Suite on page 5-6

To obtain more detailed troubleshooting information, you can access certain

menus on your phone that test your phone hardware. For more information,

see Testing Phone Hardware on page 5-7.

If you require more information or assistance, contact your system

administrator.

User Guide for the Polycom SoundStation IP 6000 Phone

5 - 2

Installation Configuration

Power and Startup

Symptom Problem Corrective Action

The display shows:

“General configuration error

Unsupported configuration

Undo last configuration change.”

The phone installation

configuration is not supported.

Verify that you have installed the phone

and any components correctly:

• See Installing the Phone on page 1-2.

• Check that no more than two

microphones are installed.

• Contact your system administrator.

Symptom Problem Corrective Action

The display shows “Network Link

is Down.”

The network cable is not properly

connected.

Verify that the network cable is properly

connected:

• Check the cable termination at the

switch or hub (furthest end of the

cable from the phone).

• Check that the switch or hub is

operational (flashing link/status

lights).

• Check if the LAN port is active or

inactive. Press the Menu key, and

then select Status > Network >

Ethernet. From the Ethernet screen,

scroll to LAN port and verify that it is

Active.

• To attempt re-registration with the call

server, reboot the phone. For more

information, see your system

administrator.

• Contact your system administrator.

User Guide for the Polycom SoundStation IP 6000 Phone

5 - 8

User Guide for the Polycom SoundStation IP 6000 Phone

Safety Notices - 4

Safety and Compliance (continued)

WARNING Electrical Safety

To avoid electric shock, do not connect safety extra low voltage (SELV) circuits to teleconference station network

(TNV) circuits. LAN ports contain SELV circuit, and WAN ports contain TNV circuits. Some LAN and WAN ports

both use RJ-45 connectors. Use caution when connecting cables.

This product is rated 48Vdc, 0.375A. When used with the optional external power supply, the power supply shall be

a Listed power supply with a LPS output, rated 48V, min. 0.375A.

Russian Compliance

New Zealand Telepermit

Polycom SoundStation IP 6000 Handsfree VoIP Conference Telephone PTC 216/08/012

PTC General Warning

The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item

complies with minimum conditions for connection to its network. It indicates no endorsement of the product by

Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work

correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply

that any product is compatible with all of Telecom’s network services.

Ministry of Information Technologies & Communication of the Russian Federation - Declaration of Conformity

DoC # СПД 1917. Expiry 03/28/2011.

User Guide for the Polycom SoundStation IP 6000 Phone

Index - 2

Contact Directory

about 2–12

accessing 2–13

adding contacts to 2–14

deleting contacts from 2–22

managing 2–12

placing calls to contacts in 2–23

searching for contacts in 2–19

storing contacts in 2–12

updating contacts in 2–21

contacts

adding to Contact Directory 2–14

blocking and unblocking 4–4

calling 2–23

deleting 2–22

managing 2–12

saving from Corporate Directory 2–18

searching for in Contact Directory 2–19

searching for in Corporate Directory 2–20

setting ring types for 2–9

storing in Contact Directory 2–12

unblocking 4–6

updating 2–21

viewing in Contact Directory 2–13

viewing in Corporate Directory 2–13

contrast, updating 2–5

Corporate Directory

about 2–12

accessing 2–13

placing calls to contacts in 2–23

saving contact to Contact Directory 2–18

saving search results for 2–14

searching for contacts in 2–20

and View Persistency setting 2–14

customizing your phone 2–1

data, entering

1–12

date and time display, updating 2–3

deleting text 1–13

Diagnostics Menu, accessing 5–7

dial pad keys, about 1–9

dialing 3–2

dialing, using IP addresses and URLs 3–2

directory contacts, managing 2–12

display contrast, updating 2–5

Display Diagnostics menu 5–7

display problems, troubleshooting 5–6

divert contact setting 2–16, 2–26

diverting calls 2–25

Do Not Disturb feature 3–4, 3–13, 3–14

dynamic forwarding 3–13

Encoding soft key, about 1–13

ending calls 3–4, 3–9

exit key, about 1–10

extension microphones 1–2, 1–5

External Microphone Kit 1–2

fields, enabling and disabling 1–13

forwarding calls 3–10

hardware, troubleshooting 5–7

HD Voice, about 1–11

holding calls 3–5, 3–8

ignoring calls 3–4

installation instructions 1–1

installation issues, troubleshooting 5–2

installing phone

using AC power 1–4

with extension microphones 1–5

using PoE 1–3

instant messaging, using 4–8

intensity, updating 2–6

IP addresses, dialing 3–2

IP addresses, entering 1–12

Join soft key 3–6, 3–7

key buttons, identifying 1–8

Keypad Diagnostics menu 5–7

keypad mappings, testing 5–7

label setting 2–16

LAN port, checking status of 5–2

language, selecting for text 1–13

language, updating for phone 2–2

LED indicators, about 1–7

letters, entering 1–13

licenses, status of 5–6

line and call icons 1–11

line information, checking 5–4

lowercase characters, entering 1–13

Polycom SoundStation IP 6000 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Polycom SoundStation IP 6000

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info