ENGLISH L’Ecologico AS 810
• Remove the filter cage (17) by pulling it upwards (fig. 3)
• Empty the water container (6) tilting it towards the groove
(fig. 9).
• Rinse the group under running water (fig. 15).
• Allow the filter to dry before replacing in the machine for
storage.
• Put the filter cage back in its correct position in the
container.
Cleaning or replacing the sponge filter
• Pull the tube (17c) from the filter cage until it slips off
• Divide the body of the cage (17a) from the filter cover (16)
• Remove the sponge filter (17b) from the cage. If the filter
is damaged, replace it.
• Rinse all the components under running water.
• Allow the sponge filter to dry before replacing in the
machine.
• Reassemble the filter group. Make sure that the filter tube
is correctly fitted (13).
• In case of replacement, only use Polti original spare parts.
• We suggest to clean the filter every 3-5 times you empty
the container
Replacing the HEPA filter cartridge
• Unhook the lever (5) under the handle (3) and lift the
cover (4)
• Remove the HEPA filter from its location (fig. 16) and
replace it with an original Polti spare part.
Note: the filter lasts about 100 hours (about every 6
months) in normal domestic use. If the suction
power noticeably decreases, replace the filter even
before the 100 hours.
Replacing the air outlet filter
• Move both levers (9) at the same time towards the grille
(fig. 17). Once the blocks have been removed, raise the
grille (8) (fig. 17).
• Take out the air outlet filter (10) (fig. 18) and replace it with
a Polti original spare part.
• Lift the cover (10a) and put the new filter back in its place
as shown in fig. 19.
• Before switching on the appliance, replace the grille
inserting the tang in the relevant lock and push until it
clicks.
Note: the filter lasts about 100 hours (about every 6
months). If the filter is torn or visibly damaged,
replace it even before the 100 hours. If the filter is
used in dusty environments, it is suggested to
increase the frequency of replacement.
