481646
8
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
PP
PP
RR
RR
EE
EE
PP
PP
AA
AA
RR
RR
AA
AA
TT
TT
II
II
OO
OO
NN
NN
FF
FF
OO
OO
RR
RR
UU
UU
SS
SS
EE
EE
Unscrew the self-refilling tank cap (7)
(Fig.1) and fill the tank with about 560 cc
of water by using the filler bottle (U) sup-
plied.
Water by its nature contains magnesium,
mineral salts and other deposits which in
hard water areas can contribute to
limescale build up in the tank. To avoid
these problems, it is necessary to swill out
with tapwater and empty the generator
tank after every 3 or 4 uses.In very hard
water areas we recommend the use of our
KALSTOP FP 2003, a special natural-
base decalcifier which inhibits and breaks
down limescale. This is a preventive
against limescale build-up and protects
the metal walls of the steam generator
tank. KALSTOP is available from Polti
dealers or by mail-order from your Polti
Service Centre.
Carefully screw on the sealing cap (7) to
hand tight.
Lift the water container handle (22) un-
hooking it from its position (Fig. 2) and re-
move the container (20) (Fig. 3).
Turn the container handle (22) as shown
in figure 4, so as to remove the “Eco Ac-
tiveFilter” water filter assembly (23).
Fill the water container (20) with about 1,2
litres of simple tap water until the MAX
level indicator (21) is reached, as in fig. 5.
Put the filter assembly (23) back into place
in the water container (20) returning it to
its initial position.
Replace the water container back into po-
sition.
Support the handle (22) until it hooks into
its place on the water container (20).
OO
OO
PP
PP
EE
EE
RR
RR
AA
AA
TT
TT
II
II
OO
OO
NN
NN
Open the flap of the built-in socket (9); fit
the monobloc plug (B2) by pushing it,
without pressing the button, until you hear
the click of the locking mechanism, then
make sure it is well locked (fig.6).
To disconnect the monobloc plug (B2)
from the appliance, push the button (B3)
and pull the monobloc so as to separate it
from the appliance (fig.6a).
Connect the plug to the mains.
Operation with steam + suction
Press the main switch (1), the first level of
suction indicators (5) will start to flash.
Press the boiler switch (2) which will light
up.
Wait for the pressure indicator lamp (4) to
light up. When it does the Vaporetto
Lecoaspira will be ready to generate
steam.
Press the suction button (A4) on the han-
dle (A2). The suction function will start up
at the minimum speed and the first stage
of the indicator lamp set (5) will stop flash-
ing and remain on. For correct use of the
suction function read the section “Suction
control/ switching off”.
Note: The handle (A2) has a safety button
(A3) which when set in locked position
prevents activation of the delivery of
steam. If the appliance is left temporarily
unattended while it is in an activated con-
dition, please remember to place the
safety button (A3) in the locked position.
To resume delivery, return the button to its
initial position.
• You can supply steam by pressing the
steam button (A5) on the handle. At the
same time you can also control suction by
pressing the suction button (A4).
Operation with suction only
If you wish to use the suction function only,
press the main switch (1), the first level of
the suction indicators (5) will start to flash.
By pressing the suction button (A4) on the
handle (A2), the suction fan will start to
run at the lowest speed and the first stage
of the indicator lamp (5) will stop flashing
and remain steadily lit. For correct use of
the suction read the section “Suction con-
trol/switching off”.
Operation with steam only
Press the main switch (1), the first level of
LECOASPIRA710 - 710 KIT
56
Lecoaspira 710-710kit - M0S07340 1M05.qxp 22/06/2006 12.23 Pagina 56
8

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Polti-Vaporetto-Lecoaspira-710

Zoeken resetten

  • Dit is de verkeerde gebruiksaanwijzing, dit is van de 700/701. Hij lijkt bijna hetzelfde, maar de 710 heeft geen veiligheids dop. En aangezien we die niet hebben, klopt er dus niks van, want volgens deze verkeerde gebruiksaanwijzing, moeten wij die gebruiken? Gesteld op 3-11-2014 om 11:26

    Reageer op deze vraag Misbruik melden
    • Klopt, wij hebben dit inmiddels aangepast.
      Van type 710 is helaas geen Nederlandse handleiding beschikbaar.
      Deze handleiding is er alleen in het Engels en Italiaans.
      Geantwoord op 3-11-2014 om 11:54

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Polti Vaporetto Lecoaspira 710 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Polti Vaporetto Lecoaspira 710 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Polti Vaporetto Lecoaspira 710

Polti Vaporetto Lecoaspira 710 Gebruiksaanwijzing - Italiano - 15 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info