ENGLISH
OO
OO
PP
PP
EE
EE
RR
RR
AA
AA
TT
TT
II
II
OO
OO
NN
NN
Operation with steam + suction
Connect the plug to the mains.
• Press the main switch (1), the first level of suction indicators (5) will start to flash.
• Press the boiler switch (2) which will light up.
• Wait for the pressure indicator lamp (4) to light up. When it does the Vaporetto Lecoa-
spira will be ready to generate steam.
• Open the flap of the built-in socket (9); fit the monobloc
plug (B2) into place by pressing the locking button (B3)
(Fig. 6).
Note: The handle (A2) has a safety button (A3) which
when set in worked position prevents activation of the deli-
very of steam. If the appliance is left temporarily unatten-
ded while it is in an activated condition, please remember
to place the safety button (A3) in the locked position.
To resume delivery, return the button to its initial position.
• Press the suction button (A4) on the handle (A2). The suction function will start up at
the minimum speed and the first stage of the indicator lamp set (5) will stop flashing
and remain on. For correct use of the suction function read the section “Suction con-
trol/switching off”.
• You can supply steam by pressing the steam button (A5) on the handle. At the same
time you can also control suction by pressing the suction button (A4).
Operation with suction only
• If you wish to use the suction function only, press the main switch (1), the first level of
the suction indicators (5) will start to flash.
• Open the flap of the built-in socket (9); fit the monobloc plug (B2) into place by pressing
the locking button (B3) (Fig. 6).
• By pressing the suction button (A4) on the handle (A2), the suction fan will start to run
at the lowest speed and the first stage of the indicator lamp (5) will stop flashing and
remain steadily lit. For correct use of the suction read the section “Suction control/swit-
ching off”.
Operation with steam only
• Press the main switch (1), the first level of the suction indicators (5) will start to flash.
• Press the boiler switch (2) which will light up.
• Wait for the pressure indicator lamp (4) to light up. When it does, the Vaporetto Lecoa-
spira will be ready to generate steam.
• Open the flap of the built-in socket (9); fit the monobloc plug (B2) into the socket by pres-
sing the button (B3) (Fig. 6)
• You may now deliver steam by pressing the steam button (A5) on the handle.
• If you decide not to use the steam anymore, you may switch off the boiler by pressing
the boiler switch (2).
Fig. 6
