649052
12
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
1.8 Depending on the surface to be cleaned (rugs/carpets,
wooden floors and delicate flooring, or hard floors), and the
function you wish to use (vacuum, steam, solid/liquid vacuum,
vacuum and steam together, with or without cloth), choose the
position (A-B-C) of the innovative universal brush, pressing the
relative pedal marked as per the label on the appliance, shown
below and detailed in the following chapters.
If you wish to only use suction, it is possible to remove the steam
hose by unlocking the automatic buttons from the vacuum tube
and the two connectors at the ends, and it is not necessary to
fill the water tank. Without the steam hose, it is impossible to
activate the steam, even with the boiler switched on.
There are two cloths supplied, one with buffers and the other
for hard-to-reach areas.
For the MCV70 model we recommend using the special
transport grip to move the appliance more easily.
The transport grip (optional for the MCV50 model) can be
purchased at all major household-appliance shops or online at
www.polti.com.
Do not use the transport grip to lift the appliance.
2. CLEANING HARD FLOORS
(tiles, ceramic surfaces, etc.)
2.1 For suction alone, set the innovative universal brush to
position C (bristle inserts) pressing the pedal (which ensures
that the holder with cloth is not
attached to the brush).
Press the suction button on the appliance and proceed with
cleaning.
It is possible to adjust the suction power by moving the cursor
on the handle.
2.2 For steam cleaning and suction, set the universal brush to
position B (rubber inserts) and ensure that the holder with cloth
is not
attached to the brush. Ensure that points 1.5 and 1.6 have
been carried out. Turn on the boiler using the ON button and
adjust the strength of the steam using the +/- buttons (to turn off
the boiler hold the OFF button for a few seconds); for this type of
surface, we recommend the maximum steam level. The steam
indicator light will start flashing and continue until the correct
temperature is reached.
2.3 Deactivate the steam lock and continue with the steam
delivery and suction, pressing the steam trigger on the handle,
and the suction button, respectively.
2.4 Alternatively, select program 1, pressing the PROGRAM
button (see Chapter 5).
The combined use of steam and suction allows the most
efficient sanitising of the surface, dissolving dirt, eliminating
grease, germs and mites, and above all allows drying of the
surfaces.
In this position, it is also possible to vacuum small quantities of
liquids and dry the floor.
2.5 To clean using steam alone, it is possible to use the abrasive
action of the cloths supplied, attaching it to the special holder.
Position the holder on the floor and position the universal brush
above it in position A (no insert), apply slight pressure until it
clicks, locking into place.
3. CLEANING DELICATE FLOORS
(wooden, stone, waxed surfaces, etc.)
3.1 For suction alone, set the innovative universal brush to
position C (bristle inserts) pressing the pedal (which ensures
that the holder with cloth is not
attached to the brush).
3.2 Press the suction button on the appliance and proceed with
cleaning.
It is possible to adjust the suction power by moving the cursor
on the handle.
3.3 For steam cleaning and suction, set the universal brush to
position A (no insert) and ensure that points 1.5 to 1.6 have been
carried out. Attach the cloth supplied to the relative holder;
place the holder with cloth on the ground and position the
brush above, applying slight pressure until a click is heard as it
locks into place. Turn the boiler on using the ON button and
AAA
CAA
BBC A
Only use the cloth and special holder with the brush in position A.
Before removing the holder with cloth from the brush, wait a
few minutes to allow the cloth to cool. Never use the holder
without a cloth.
For safety reasons, apply the steam lock on the handle during
vacuuming.
WARNING: When first operating steam, there may be some
drops of water mixed with the steam due to temperature
imbalances.
Direct the first jet of steam onto a rag.
WARNING: The level of dirt vacuumed should not exceed the
MAX indicator on the dirt collector; this indicator refers to both
solid and liquid dirt. Upon reaching the maximum level, see
Chapter 13.
To avoid any dirt in the dirt collector causing bad smells
(especially where liquids are vacuumed and/or steam is used),
we recommend emptying and cleaning after every use
according to the methods described in Chapter 13.
Before using the appliance on delicate surfaces, ensure that
the part in contact with the surface is free from foreign bodies
that could cause scratches.
For safety reasons, apply the steam lock on the handle during
vacuuming.
| 26 |
ENGLISH
Manuale UNICO MCV50-MCV70 VERSIONE 16-09-14_vers7:UNICO 22/09/2014 16.19 Pagina 26
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Polti UNICO MCV50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Polti UNICO MCV50 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Polti UNICO MCV50

Polti UNICO MCV50 Gebruiksaanwijzing - Deutsch - 21 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info