581006
11
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
11

Having properly intalled and wired your CB and antenna and power supply, you are now
ready for the six steps designed to get you into effective and satisfactory operation.
Step 1: Screw the plug from the microphone into the microphone jack on the face panel and
checkforsecuret.
Step 2: Make sure your antenna is securely connected to the antenna connector.
Step 3: Make sure the Squelch control is in the 9 o’clock position.
Step 4: Turn the power on and adjust the “volume” control for a satisfactory sound level.
Step 5: Select your desired channel by the channel selector up or down.
Step 6: To transmit, press the push-to-talk bar (PTT) on the microphone.
To receive, release the PTT bar.

1 - FUN (FUNCTION) button
Your CB radio Polmar EX-40 is equipped with dual function buttons. Press each button to
accesstherstfunction,toaccessthesecondfunctionpresstheFUNbutton.Todisable
this function , press FUN button again.
2 - FR/BP (Frequency/Beep) button
When this button is pressed, the channel frequency or number are displayed alternately.
After FUN button is pressed, this button is used as Beep sound On/Off selector. When you
press the FUN button and then this button, BP appears on LCD and you can use the Beep
function.
3 - LCR(Last Channel Recall) button
This button returns you to the last-used channel.
4 - Power/ AF Volume
Turn this control clockwise to switch on the CB radio and to increase the volume level.
Turn it counter-clockwise, to decrease volume and switch off the radio.
5 - LCD
The LCD displays all operating status of your CB radio.
6 - Channel Selector
It is used to select the desired channel. Turn it clockwise to change the channel up and turn
it counter clockwise to change the channel down.
A channel up/down button is also located on the microphone.
7 - SQUELCH Control
When turned clockwise, it quiets the receiver when there is no receiving signal and allows
a quiet standby operation.
8 - AM/FM button
This button is an AM or FM selector. When this button is pressed, AM or FM is displayed on
the LCD.

Therstfunctionofthisbuttonisscanning.Whenyoupressthisbuttonscanningstarts
through all 40 channels.
The scanning stops at any BUSY channel and stays on that channel for ten seconds after
the conversation ends, then it resumes scanning.
To activate this feature, press the Scan button, SCAN is displayed on the LCD.
To stop scanning, press the Scan button again or the PTT bar in the microphone.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Polmar EX-40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Polmar EX-40 in de taal/talen: Engels, Italiaans als bijlage per email.

De handleiding is 0,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info