• Turning the Camera On and Off
Slide the Power Switch in the arrow direction shown near the Power
Switch and hold it for 2 seconds to turn on the camera. You will hear
a beep sound and the Operation LED will light up in green. The Flash
Charge LED will blink in red, indicating charging the Flash. It will stop
blinking upon fully charging the Flash. Slide the Power Switch again and
hold it for 2 seconds to turn off the camera.
• Checking the Battery Level
Check the battery power level before taking pictures .
1. Turn on the camera by sliding and holding the Power Switch in the
arrow direction shown near the switch for 2 seconds.
2. Set the camera in Auto, A/S/M or Video mode.
3. Check the battery power status that appears on the LCD screen.
Battery has adequate power.
Battery power is low.
Battery power is exhausted. “Recharge battery”
will appear on the LCD screen when the battery
is exhausted and then the camera will turn off
automatically. Please recharge the battery.
• How to Navigate Menus
Menus are used to adjust capture and play settings, as well as other
camera settings like the Date/Time and sounds. Menus are displayed on
the LCD by pressing the menu button.
According to the circumstances, press the menu button and then press
the
or
buttons to select the camera or setup menu. Press
and
buttons to scroll up and down through menus. Press
and buttons to
scroll left and right.
