a. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive.
b. Select Install the software automatically recommended and click the Next
button.
c. Click the Next button in the window that appears. Afterwards, please skip to
procedure 7
.
5. For Windows Vista:
a. Select “Locate and install driver software (recommended)” when the “Found
New Hardware” window is displayed.
b. Click on the Continue button when the “User Account Control” dialog pops up.
c. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive when the system prompts you “Insert the disc that came with
your USB Scanner＂， and click on the Next button. Afterwards, please skip to
procedure 8
.
6. For Windows 7:
a. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive. Close the AutoPlay window that appears.
b. From the Windows Start menu, right click on the Computer and select
Properties from the pop-up menu. Click Device Manager on the following
screen.
c. In the Device Manager window, right click on this scanner under Other
devices item and select Update Driver Software from the pop-up menu. Click
Browse my computer for driver software in the window that appears, and
click the Browse button.
d. In the Browse For Folder window, select the folder that contains this scanner
driver and click the OK button to return to the previous screen. Click the Next
button. Afterwards, please skip to procedure 8
.
7. During the process of the installation, a message “Windows can’t verify the
publisher of this driver software” might be prompted. Please ignore it, and click on
Install this driver software anyway to continue the installation without any
misgiving at your scanner functioning.
8. When the system completes the installation, click the Finish button.
9. Follow the on-screen instructions to install all software that your new scanner
requires.
10. After the software is installed, close all open applications and click the Finish
button to restart your computer.
11. After the computer is restarted, you will be prompted to perform the scanner
calibration.
12. Insert the special calibration sheet into the ADF of the scanner, with arrows toward
10
