Handleiding Plawa SPYPEN Designer (pagina 20 van 21) (Engels)

491730

Verklein

Vergroot

Pagina terug

1/21

Pagina verder

User’s Manual

SPYPEN Designer

DESIGNER

Introduction

Congratulations on purchasing the SPYPEN Designer. We hope you have many hours of fun

with this amazing USB device for your PC.

The SPYPEN Designer is a complete drawing, painting and writing tool. It features a 512-level

pressure-sensitive drawing pad, a cordless three-button mouse and cordless two-button pen.

As a pressure-sensitive pad, the harder you press with the cordless pen, the thicker the ink,

paint, crayon etc. appears on screen.

The software bundle should ensure many hours of fun. PhotoStudio® includes varies tools to

create fun drawing.

The software supplied includes Microsoft® NetMeeting™. The SPYPEN Designer supports

NetMeeting™’s shared “Whiteboard” facility and allows you to share drawings and sketches

over the Internet. There are also annotation and sketching tools, a signature verication

program.

Table of Contents

Introduction .................................................................................................... 2

Table of Contents ............................................................................................. 3

1. System Requirements ......................................................................................... 4

2. Package Contents .............................................................................................. 4

3. Getting Started .................................................................................................. 5

3.1 Battery Installation ..................................................................................... 5

3.2 How to install the SPYPEN Designer Driver .................................................. 6

3.3 How to connect Your SPYPEN Designer ........................................................ 7

3.4 How to install PenSoft ................................................................................. 7

3.5 How to use PenSoft..................................................................................... 7

3.6 How to install PhotoStudio® 2000 ............................................................... 12

3.7 How to adjust the cordless mouse and pen settings ....................................... 12

3.8 How to use PhotoStudio® 2000 .................................................................. 14

3.9 How to install Microsoft® NetMeeting™ ....................................................... 15

3.10 How to use Microsoft® NetMeeting™ ........................................................... 16

4. Customer Support ............................................................................................. 17

5. Troubleshooting ................................................................................................ 28

6. Battery Guidance .............................................................................................. 29

7. Technical Specications ...................................................................................... 20

8. FCC Notice ................................................................................................... 21

1. System Requirements

Compatible with Microsoft® Windows® 98, Windows® ME, Windows® 2000 or XP

• Intel® Pentium® II 333Mhz or equivalent processor

• 128MB RAM

• USB Port

• CD-ROM Drive

• Colour Monitor with minimum 16-bit colour graphic capability or higher

• Standard mouse and keyboard

2. Package Contents

SPYPEN Designer Software CD-ROM

(includes Art Pad II Driver, PhotoStudio® 2000, Pen Soft,

Microsoft® NetMetting™ and Acrobat® Reader)

2 x AAA Batteries

User’s Manual

Tablet

DESIGNER

Cordless Mouse

User’s Manual

SPYPEN Designer

DESIGNER

Cordless Pen

3. Getting Started

3.1 Battery Installation

Cordless Mouse

1. Open the battery door on the back of the cordless mouse. Insert the 1 x AAA alkaline

battery into the battery compartment. (Make sure you follow the correct polarity (+) (-) as

indicated.)

2. Close the battery door.

Cordless Pen

1. Carefully ease the 2 pen halves apart. Insert 1 x AAA alkaline battery into the battery

compartment. (Make sure you follow the correct polarity (+) (-) as indicated.)

2. Slide the 2 pen halves together ensuring the raised area on both halves is lined up.

Cordless Mouse Cordless Pen

3.2 How to install the Art Pad II Driver

Note:

We recommend NOT TO CONNECT YOUR USB SPYPEN Designer UNTIL YOU HAVE INSTALLED THE

Art Pad II Driver SOFTWARE. Ensure you have inserted your batteries in both the cordless pen and mouse

before SPYPEN Designer installation. (see Section 3.1 for battery installation)

3.2.1 Installing your Art Pad II Driver

1. Insert the CD-ROM disk into the CD-ROM drive and close

the CD ROM drawer.

2. An installation wizard will automatically launch.

3. Click “Art Pad II Driver” icon.

4. Follow the instructions presented on the screen to complete

the installation.

5. The Art Pad II Driver les will begin to install to the

proper location.

6. Installation will prompt you to plug in your USB tablet.

Connect your SPYPEN Designer’s USB connector into an

available USB port on your computer. (See Section 3.3)

7. Microsoft® Windows® will detect your newly installed SPYPEN Designer and will proceed

with the nal steps of the installation.

8. You need to restart your computer to complete the installation.

9. Then connect your SPYPEN Designer to your computer please refer to section 3.3.

10. The Green LED on the SPYPEN Designer surface will ash to denote that

the surface is active when used with the pen and mouse.

Tips! Leaving the mouse on the SPYPEN Designer will slow down the access of other les and

programs or starting your computer.

3.2.2 To Uninstall the Art Pad II Driver

1. Go to Start -> Programs-> SPYPEN Designer -> Uninstall -> Ok

2. Follow the on screen instructions.

Note:

If the setup screen doesn’t appear after loading the CD, then you can manually start it by double-clicking

the “My Computer” icon on your desktop, then double-clicking the icon for the CD-ROM drive. When the

CD-ROM window opens, double-click the “Autorun” icon.

3.3 How to connect Your SPYPEN Designer

For the fastest and easiest installation of the

SPYPEN Designer , we recommend NOT TO

CONNECT YOUR USB UNTIL YOU HAVE INSTALLED

THE Art Pad II Driver SOFTWARE.

Simply plug in the USB cable to the USB port on

your PC or Notebook device.

The USB port can be found on the front or back

panel of your PC or Notebook device. Look for this

symbol

next to the USB connection port.

(Also see your PC operating manual for the

location of your USB connection port.)

3.4 How to install PenSoft

PenSoft provides tools to add “Inks” (geometrical shapes, handwriting, signatures) to

documents. This is useful if you want to make a document (e.g. an e-mail) more personal,

authentic, expressive, as well as impressive.

1. Insert the CD-ROM disk into the CD-ROM drive and close

the CD-ROM drawer.

2. An installation wizard will automatically launch.

3. Click “PEN SOFT” icon.

4. Follow the instructions presented on the screen to complete

the installation.

5. If you need further help on using Pen Soft, simply double

click the le “Document” under the Pen Soft folder.

6. If installation is succesful, the following icon

will appear on the desktop.

Pen Lock

Sign

Word 97

Annotation

Screen Saver

Handwriting

Recognition

3.5 How to use PenSoft

Handwriting easy set up instructions

Turn your handwriting, signatures and geometrical shapes into e-mail and word processed

documents by using your own handwriting that is cleverly recognised and turned into typed

text. Some patience is initially required when programming in your own handwriting style.

Letters are automatically kept in the “Learn” window, ensure the toolbar is set to the mouse/

pen icon. Access the learn window by pressing the 3rd from left icon on the toolbar. Your

letters are kept here, over type into the box below named “Input text here” Select the “insert”

key to record the letter.

Step 1 Ensure you have installed Adobe® Acrobat® Reader to print out further software

instructions supplied on the CD or download and print from websites (http://

www.adobe.com/acrobat) supporting the software.

Step 2 Enter the control panel to adjust your mouse & pen button settings. Go to Start >

Setup > Control Panel > Tablet Settings.

Step 3 Go to handwriting recognition. Go to Start > Programs > Pensoft > Handwriting

recognition.

Handwriting recognition

The Pensoft toolbar will appear.

Select the far L/H toolbar or or icon to toggle between mouse and pen

operation. A shortcut for this is to select the F11 key. With the icon selected to pen operation

open your word processing document (eg, MS Word) and with the pen and SPYPEN Designer

surface write individual letters which will appear on screen.

We recommend you write the alphabet (A-Z) to check out which letters are recognised using

your own unique handwriting. Use capital letters rst and then lower case letters.

TIP! The larger you write on screen the software will turn into capital letters and visa versa

for small writing. Please practice this.

Step 4 For some letters the software may have difculty recognising using your own unique

handwriting, so you will have to add some letters to the memory database. This is

done by the following procedure. Letters are automatically kept in the “Learn” window.

Ensure the toolbar is set to mouse/pen icon. Access the learn window by pressing the

3rd from left icon on the toolbar. Your letter are kept here, overtype into the box below

named “Input text here” Select the “insert” key to record the letter style. As your

handwriting will vary slightly several versions of your letters may need to be stored in

the database.

Auto signature

Go to Start > Programs > Pensoft > Inking. A toolbar will appear on screen.

Select “setup” for the toolbar and make any changes to your signature settings.

Select “Start” and with the pen on the SPYPEN Designer surface write your signature.

Your signature will appear on screen with the settings you have chosen.

Select “File” and “Save as”, this will allow you to recall your signature from le and drop into

for example word processing and e-mail documents.

For further detailed operating instructions and details, go to Start > Programs > Pensoft >

Document. The relevant sections are presented on the left side of the page.

Screen Savers

Produce your own unique screen savers using SPYPEN Designer and the software PhotoStu-

dio® 2000 by going through the following process;

Quick set up

Step 1 Go to Start > Programs > PhotoStudio 2000 > PhotoStudio 2000 > File > New.

Produce your screensaver background design.

Step 2 Go to File > save as > Desktop and save le type as _____.BMP

Step 3 Go to Start > Settings > control panel > Display > Screen Saver > Screen Saver set

to “Scrsav” > Select Settings >

Background > [select Browse and select the le you created on your desktop]

Inking (stroke le) > New > [draw by selecting the tools by pushing your cursor to the

bottom of your screen] > save as _____.INK.

Step 4 In the screen saver settings, adjust the desired wait time for your screen saver to

operate, and select “apply” to save your settings. Go to Settings ‹ System and adjust

Pause time (secs) if your screen saver does not operate.

Important!

Remove the Mouse & Pen away from the SPYPEN Designer surface for the screen saver to operate.

Repeat steps to produce another unique screen saver.

Penlock

PenLock provides security for your les. Penlock will work with any Microsoft Word or Notepad

document.

You can type your password or use your signature with the SPYPEN Designer pen to decode

and unlock a le. If the password or signature is recognised then you can see the document

in NOTEPAD. After your working are over and quit NOTEPAD. PenLock will encode the le

automatically.

Step 1 Go to Start > Programs > Pensoft > Penlock. Insert CD-Key number which could be

found on the back of your CD-ROM cover. An icon called “le encrypt system” will

appear in your bottom toolbar on your PC. (by the clock)

Step 2 Click on the File encrypt system icon and select “setup”

Step 3 The set up center window will appear. Click on all 3 buttons in the set up window to

keep les;

a) keep encrypted le after decrypt.

b) Small button on caption.

c) Load system while startup windows.

Set default encrypt method to “Data encryption standard” (DES) for fastest response. Set sign

level during practice stages to most tolerant. You can adjust this setting as you become more

procient at signatures with the SPYPEN Designer pen.

Step 4 Select the “Ink” window in the set up center to change your ink widths, styles etc

Step 5 Select the “Startup” window in the set up center.

Tick the auto login box to make the system ask for your password every time you

switch on your PC. Enter your user name in the account box and your secret password

in the password box.

Important!

Make sure if more than one user uses your PC they can gain access.!!!

Step 6 Select the “Explorer” window in the set up center.

Practice

Practicing & Using PenLock

The follow steps will help you to familiarise yourself with PenLock;

1. For an example we will encrypt a le named test under the C:\ directory.

First, you must produce a test word document, call it “test” and save on your C Drive.

Access security explorer via the le encrypt system icon (next to clock) highlight the le

you want to encrypt and click the “Encrypt” button. Type your password and conrm or

signature twice.

Press the Ok button to encrypt the le and PenLock password or signature that “test.doc”

le is now encrypted (coded). Double click on the encrypted le to see the secret coding.

2. Decrypt test.doc le.

In Security Manager, select decrypt button and type your password or signature. Press Ok

button code to see the le.

3. Forgotten password: If you forget your password or signature, please follows these steps.

Put the SPYPEN Designer CD (supplied) disk in the CD-ROM. Go through the Pensoft set

up and Click the Security Explorer icon.

Select the encrypted le. Click the [Rescue] icon, then type the Pensoft CD key code on the

reverse of your CD wallet. You will see the password and ink of the encode le. Select the

les that You want to decrypt. Type the install serial number and you can see the original

password and signature.

Please remember the password and use it to decode your les.

Select the encrypted le. Click the [Decrypt] icon, then type the install password. The le

will be decrypted successfully.

Important!

The Pensoft program has an “e document” le for Traditional Chinese Language support. This has a 3.9 MB

internet download, this download is not required for European customer support.

Every le that you want to encode has size limit. The le size cannot be over 20MB and no less then 16

bytes.

For further information on the instructions for use go to File > Programs > Pensoft > e

document. The various sections we have highlighted in these quick set up instructions are

listed down the left hand side.

3.6 How to install PhotoStudio® 2000

PhotoStudio® 2000 is a full-featured, easy-to-use digital image-editing program that provides

a complete set of photo editing and retouching tools, plus a wide selection of special effects

and enhancements. Its powerful features include a wide variety of input and output options,

layers, multiple undo and redo functions, image management tools, editable text, multiple le

format support and a lot more.

1. Insert the CD-ROM disk into the CD-ROM drive and close the

CD-ROM drawer.

2. An installation wizard will automatically launch.

3. Click “PhotoStudio” icon.

4. Choose your prefered language.

5. Follow the instructions presented on the screen to complete

the installation.

3.7 How to adjust the cordless mouse and pen settings

Step 1 Double click on the “SPYPEN Designer Manager” icon

on the lower toolbar of the PC desktop. Your SPYPEN

Designer Manager will appear.

Pen Settings

Step 2 Select the “Buttons” Tab on the SPYPEN Designer Manager.

Decide what functions you want your Pen to perform when

acting as a mouse. Your Pen tip always acts as a left

click.

Select the Scope Tab (Adjust Working Area)

Step 3 Adjust the SPYPEN Designer working surface to suit your

own needs. Either drag the blue area with the mouse to

adjust the sizes, click on the buttons FULL AREA/SCREEN

RATIO/RESERVE EDGES or type in the sizes in the PEN

AREA and PEN AREA OFFSET BOXES. Press OK to conrm

settings.

Select the Hot Cell Tab

Step 4 Set your F1 - F13 hot cells as shortcuts to access favourite

websites, program or send emails.

Hot Cells

DESIGNER

Click the Dene button and select either;

• RUN to set a hot cell to nd program folder or le

• INTERNET to set a hot cell to access directly to a favorite website or setup an email.

• HOT KEY to set a hot cell to act as common functions around the computer (eg. save,

copy, paste)

Use the pen on the Hot Cell to simply activate the hot cell.

Select the Pressure Tab

Step 5 Use the Pressure Section to practice test your cordless pen

pressure settings.

Select the colour and adjust the Pen button sensitivity

with the Click Sensitivity light - heavy scale.

Select OK to conrm setting.

3.8 How to use PhotoStudio® 2000

Editing your photo using your Tablet

Start > Programs > PhotoStudio 2000 > PhotoStudio 2000 > File > Open. Using the toolbar

to create fancy photo edges and using your tablet to brighten up your photo as shown below.

Stamp

Type of Stamps

You could also select area [background] using the “Freehand select” and select “pattern ll”

icon and ll in pattern.

Selected area to be lled

Freehand select

Patterns

Drawing tools (pencil/

paintbrush/spraycan)

Draw with your tablet using PhotoStudio

Software

Your can simply use the drawing tools to draw your own picture.

Toolbar

3.9 How to install Microsoft® NetMeeting™

NetMeeting™ provides the most complete conferencing solution for the Internet and corporate

intranet. Using your SPYPEN Designer , PC and the Internet, you can now use the shared

Whiteboard facility in NetMeeting and write to your friends in real-time!

1. Insert the CD-ROM disk into the CD-ROM drive and close the CD ROM draw.

2. An installation wizard will automatically launch.

3. Click the “Microsoft® NetMeeting™” icon.

4. Follow the instructions presented on the screen to complete the installation.

5. For further installation details, please visit the following website:

http://www.microsoft.com/windows/netmeeting

Note:

• You need to enter your name, your e-mail address and country details during installation.

• You need to adjust the playback volume and your record volume.

Note:

If the setup screen doesn’t appear after loading the CD, then you can manually start it by double-clicking

the “My Computer” Icon on your desktop, then double-clicking the icon for the CD-ROM drive. When the

CD-ROM window opens, double-click the “Setup” icon.

3.10 How to use Microsoft® NetMeeting™

1. Make sure your SPYPEN Designer is connected to your PC.

2. Put your SPYPEN Designer on at surface.

3. Connect your microphone (not included) to your audio card’s

external microphone connector and web camera (not included)

to your computer.

4. Double-click the “NetMeeting” icon on your desktop or

select the “NetMeeting” icon from the Windows Start Menu.

5. Type in the IP address, computer name or telephone number of

the person you want to call and press the “Place Call” button.

Click “Place

Call” Button

To nd your own IP address, go to “Start” and click “Run”. Type in “winipcfg”

and click “OK”, IP conguration window will appear and you can see your IP address.

6. If you need further help on how to use Microsoft® NetMeeting™, select the “Help” under

the manual bar and choose the topic you need. Or you can visit the following website:

http://www.microsoft.com/windows/netmeeting

4. Customer Support

plawa-feinwerktechnik GmbH & Co. KG

Bleichereistr. 18

73066 Uhingen - Germany

Helpline: +49 (7161) 93872-0 (English, Deutsch)

Website: www.spypen.com, www.plawa.de

Email: support@plawa.de

5. Troubleshooting

The troubleshooting guide is designed to help you. If problems continue, please contact your

local customer support hot-line. See your registration card for helpline contact details.

My cordless mouse or

pen will not work.

The battery in your cordless

mouse or pen is dead.

Your SPYPEN Designer is not

properly connected via the USB

cable or the cable is not properly

connected to.

There could be a problem with

the USB controller software,

human interface device, ports

or the USB connected to your

SPYPEN Designer.

Replace batteries.

Check the USB cable connection to your PC.

Check the status of your system by checking in

your PC Device Manager:

1. Single mouse click on “My Computer” on your

desktop.

2. Right mouse click.

3. Select “Properties” then “Device Manager”.

4. Select “+” on “Human Interface Devices”, “HID-

compliant device” should be displayed. If this is

not displayed, your PC has not recognised the

SPYPEN Designer Cordless Pen. This veries

that the SPYPEN Designer has been properly

connected to your PC, the problem most likely

stems from the cable or ports or USB controller

that connects the SPYPEN Designer to your PC.

5. Select “+” on “Human Interface Devices”, “HID-

compliant device” should be displayed. If this is

not displayed, your PC has not recognised the

SPYPEN Designer Cordless Mouse. This veries

that the SPYPEN Designer has been properly

connected to your PC, the problem most likely

stems from the cable or ports or USB controller

that connects the SPYPEN Designer to your PC.

Select “+” Universal Serial Bus Controller (USB)

If “!” or “?” appear there maybe a problem

with the USB controller. Or if Universal Serial

Bus Controller cannot be found consult your PC

stockists helpline.

6. Select “+ Ports”. If “!” or “?” appear there maybe

a problem with the port connection between the

cable and your PC. Consult your PC stocklists

helpline.

7. Check to see if there is any “Unknown device”

listed.

Your PC may be confused where to locate the les

produced during the driver installation. Highlight

the “Unknown device” and select “remove”.

Uninstall the SPYPEN Designer Driver (see

Section 3.2.2). Insert batteries and re-install

SPYPEN Designer Driver, follow the on-screen

instructions.

Problem

Symptom

Solution

You may have installed the

software before installing the

batteries in the SPYPEN

Designer Cordless Pen and

Mouse.

6. Battery Guidance

Cordless Mouse Cordless Pen

Important Note:

We strongly recommend that you do not use rechargeable batteries as this may affect the performance of

your SPYPEN Designer (mouse and pen).

WARNINGS!

• Batteries should be replaced by an adult.

• Non-rechargeable batteries are not to be recharged.

• Rechargeable batteries are to be removed from the cordless mouse and pen before being

charged (if removeable).

• Rechargeable batteries are only to be charged under adult supervision (if removeable).

• Different types of batteries or new and used batteries are not to be mixed.

• Only batteries of the same or equivalent type as recommended are to be used.

• Batteries are to be inserted with the correct polarity.

• Exhausted batteries are to be removed from the SPYPEN Designer (mouse and pen).

• The supply terminals are not to be short-circuited.

• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.

• Do not dispose of the batteries in re.

• Batteries are to be removed from the SPYPEN Designer (mouse and pen) when not in use.

• Do not use rechargeable batteries.

These instructions should be retained for future reference.

7. Technical Specications

Active Area (WxL) 8”W x 6”L (152mm x 114mm)

Macro Cells 13 Macro Function Keys

Physical Size (WxLxT) 10.5”W x 12”L x 3/8”T (265mm x 300mm x 10mm)

Power Consumption 0.35W

Power Supply USB port (DC 5V regulated)

Weight 500g (with cable)

Origin Position Upper Left

Resolution Maximum 4064 lpi / 160 lpmm

Accuracy 0.25mm(0.01 inch)

Maximum Pressure Levels 512

Maximum Reading Height 8mm (0.4”)

Communication Interface USB Port

Connector USB low speed connector

Batteries 2 x AAA Alkaline Batteries (included)

Software Bundled SPYPEN Designer Manager, PhotoStudio® 2000, Pen Soft,

Microsoft® NetMeeting™ and Acrobat® Reader.

SPYPEN Designer Cautions

• Never immerse any part of the SPYPEN Designer or its components into any uid or liquid.

• Disconnect the SPYPEN Designer from your PC before cleaning it.

• Remove dust or stains with a soft cloth dampened with water or neutral detergent.

• Do not place hot items on the surface of the SPYPEN Designer.

• Do not attempt to open or disassemble the SPYPEN Designer. This will affect any warranty

claim.

8. FCC Notice

This device complies with Part 15 of FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) This device must

accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modications to this unit not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is needed.

• Consult the dealer or an experienced radio/TV technician for help.

Shielded cable must be used with this unit to ensure compliance with the Class B FCC limits.

GER EN 0202

Part No : OM837206 R1

Plawa SPYPEN Designer Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Plawa SPYPEN Designer

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info