575786

Pixel TC-252 Timer remote control Handleiding

12
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
有线定时快门线
Timer Remote Control
TC-252
PSM47 V10.02
中文
English
Open the background light of display
09
Overview 02
TC-252 introduction
04
The name of each part 0 5
07Prepare for install and use
Connection with the camera 08
Shooting control
10
1
Single shooting
10
Install and replace the battery
07
Cautions
03
Continuous shooting within one second 11
[ ]shooting
1 3
Delay shooting 14
Timing plan for shooting 1 7
PIXEL TC-252 Specifications 2 4
Contents
This manual is current update of 1st Mar, 2012. Please contact
to PIXEL distributor for further information, if interesting of the
combining usage with products released after this day.
The batteries should not install anti-polarity; Otherwise the batteries may
leak corrosive liquids, heat or explosion.
Make sure the camera and TC-252 are powered off before install it.
When connected the remote cable with the device, do not pull the wires.
As this is an electronic product accessory; some of the environment causes
may affect the working. However this is hardly ever to get this situation.
This product can't be strong vibration, or may lead to product failure.
For a long time non-use, please remove the battery to prevent leakage of
corrosive liquids and damage the product.
Do not put it in high temperature, such as a closed car under direct sunlight,
the control panel and other high-temperature areas.
Keep dry, don’t use wet hand contact with the product, it must not be
immersed in water or exposed to rain, and this may lead to not work properly.
Do not use flammable and explosive gases in violation of this warning may
cause an explosion or fire.
Because this product include battery, regarding how to use battery, please
operate it strictly according to related rules, otherwise it may cause
explosion, fire or physical injury.
3
2
Overview
Thank you for purchasing high-performance PIXEL products
First of all, thank you for purchasing product of PIXEL. TC-252 is a high
quality wired timer remote control with the function of single shooting,
continuous shooting per second,[ ]shooting, user-defined time-delay and
timing plan for shooting. Low consumption of LCD display will make you be
clear at a glance of the using status and using plan.
Before use this product, you must read and fully understand this manual,
then learn to use the camera to ensure you are familiar with the operation
properly. Through this manual you can easily handle the operation method
and the attentive things.
Cautions
5
4
1
13
14
Body
Body
TC-252 introduction
11
10
6
7
8
9
2
3
4
5
12
LCD display shows the channel, power, function mode. It’s easy to
understand and operate.
Low power consumption when standby; standby time more than 3 years
using 2pcs AAA batteries.
user-defined delay and timing plan shooting
The device support to control different brand or style of cameras by using
different shutter connect cable.
Support single shooting, continuous shooting within one second, [ ]
shooting and .
Please check all included items after open the packing, if missing, please
contact to dealer.
1. Timer remote control TC-252 -------1pc
2. Shutter connect cable ----- 1pc
3. AAA battery ---------------------------- 2pcs
4、Manual(this manual) ------ 1pc
The name of each part
Here are the names of each part:
11
Shutter indicator
10
Display
Timing plan start/stop button
9
8
Increment button
Right move button
7
6
Set button
5
Release button
4
Decrement button
3
Left move button
2
Background light button
1
Output control socket
12
Battery cover
13
Product back sticker
14
Item code
The icon of timing shots
12
The icon of interval time
11
The icon of exposure time
10
The icon of delay time
9
8
Low battery voltage icon
7
Delay shooting icon
6
[ ]shooting icon
4
Single shooting icon
Function area
3
7
6
Display
Input plug
Shutter connect plug
Preparation for installation and use
Install and replace the battery
1. Slide and open the battery cover.
3. Close the battery cover.
Shutter connect cable
1
3
2
4
5
6
7
8
10
9
Display
11
12
13
1
2
1
2
The name of each part
1
Timing plan function area
2
Time display area
5
Continuous shooting within one second icon
Before use, you should read the user manual of your camera carefully;
understand the manipulation and functional setting. The function setting of
camera may influence the efficiency control of the camera.
The low battery voltage icon[ ] will twinkle or the character
become dim obvious when the power is not enough, that
means the low battery voltage has already influence the
normal work of the device, which needs to replace the battery
in time. The timer remote control uses 2pcs of AAA batteries;
Please follow the steps to replace the battery if needed.
2. According to the signs of positive [+] and negative [-] in
the battery compartment to install the battery correctly.
You should pay attention to the polarity of battery because of
the wrong installation will make the device work abnormally,
or even physical injury.
DC0 DC1 DC2
E3 N3
RS1
S1 UC1
9
8
Connection with the camera
Open the background light of display
3s
Preparation for installation and usePreparation for installation and use
1. First, fix the camera on the tripod or other fixed bracket.
2. Open protective cover of external shutter socket and
put the shutter plug of shutter connect cable in place,
then make sure it has been fixed firmly.
For most of camera shutter socket, there is mis-plug interface,
please note insert direction so as to avoid damage to shutter
socket.
3. Insert the input plug of shutter connect cable into the
output control socket of TC-252.
The timer remote control will not be able to control the camera if
the shutter connect cable hasn' t insert correctly.
4. Open the camera power.
Press and hold the background light button for 3 seconds,
the background light will be turned on.
Open the background light and press the button twice each 6
seconds, the background light will keep lit.
The background light will not be close by hand; it will turn off
after 6 seconds automatically without any operation.
1 1
1 0
[ ]shooting function
Single shooting
Sketch map for selecting function mode:
Single shooting function
Press
Press
Press
Press
Press
Press
The instruction is under the premise that the timer remote control and camera
have been connected tightly, and turned on the power of camera and timer
remote control. The detail instruction of remote shooting will be showing as
follow.
Continuous shooting
within one second function
Delay shooting function
1. In the power-on state, set the single shooting icon [ ] as the function
one by pressing the left move button[ ]or right move button[ ].
In the sleeping state, press any key to wake up timer remote control to enter single
shooting mode.
In the sleeping state, it can focus and shot under the single mode without wake up.
2. Half-press the release button, the green light lit, and
the camera is in the focusing state until the release or full-
press the button.
3. Full-press the release button, red light will light for a
while, the camera start shooting.
Make sure to set the camera function to be [ ].
When the camera function is set to be[ ], it may cause continuous
shooting.
When the camera function is set to be[ ],the camera will shoot
based on[ ]mode, it may cause underexposure or overexposure.
When the camera function is set to be [ ], the camera will execute
delay shooting.
Continuous shooting within one second
1. In the power-on state, move the activities icon to continuous shooting within
Part of the cameras can' t support to wake up the external shutter, it' s unable to wake up
the external shutter and take photo when the camera is dormant.
Shooting control Shooting control
1 3
1 2
one second icon[ ]as the function one by pressing the move button[ ]or
right move button[ ].
left
2. Half-press the release button, the green light lit, and
the camera is in the focusing state until release or full-press
the button.
4. Release the release button, the camera will stop
shooting.
Make sure to set the camera function to be [ ].
When the camera function is set to be [ ], it may cause continuous shooting.
When the camera function is set to be [ ],the camera will shoot based on [ ] function,
it may cause underexposure or overexposure.
When the camera function is set to be[ ], the camera will execute delay shooting.
[ ]shooting
1. In the power-on state, move the activities icon to [ ] shooting icon[ ]
by pressing the left move button[ ]or right move button[ ].
2. Half-press the release button, the green light lit, and
the camera is in the focusing state until the release or full-
press the button.
3. Full-press the release button, the red light starts
flashing and start timing, the timer remote control
continuous output shooting signal, the red light keep
flashing. Camera enter into [ ] shooting.
4. Press the release button again, timer remote control
will stop output shooting signals, camera stop [ ] shoot.
Continuous shooting within one second is one patent function which issued by Pixel
limited Enterprise, it'll support spacing continuous shooting within one second and
never change the single shot mode of the camera.
3. Full-press the release button, red indicator will be light,
keep fully press the button, the indicator will flash red and
green in turn. The shooting speed will be one photo per
second.
Shooting control Shooting control
1 5
1 4
The differences between[ ]mode and[ ]mode are as follow: [ ]function is the release
button is pressed fully and keep on, shoot every second and stop shooting until the release
button is released. While[ ] function is the camera will start shooting when the release
button is pressed fully until press it again, the shooting will stop.
Make sure to set the camera function to be [ ].
When the camera function is set to be [ ], the camera only shoot once but not[ ]
shooting.
When the camera function is set to be [ ],the camera will be continuous shooting.
When the camera function is set to be [ ], the camera will be delay shooting once.
Delay shooting
Delay shooting setting
1. In the power-on state, move the activities icon to delay
shooting icon[ ] by pressing the move button[ ]or
right move button[ ]. Press the set button entering the
left
delay setting for adjusts the shooting numbers. Then the
numbers of shooting icon [ ],number of shooting [ ]will
blink at the same time.
2. Press button[ ]settings shot number can be increased,
press button [ ], settings shot number can be reduced. It
can be set between 1 to 99 sheets .
3. Press button[ ]enter into the delay setting of delay
shooting. The delay shooting time icon[ ], delay shooting
time[ ]will blink at the same time.
4. Press the button[ ], set the delay time increased,
press button[ ], set the delay time reduced. It can be set
between 1 to 59 seconds.
5. After set up the new parameters, press the set button, save and exit settings.
When enter to the delay shooting set, timer remote control will save the previous setting.
By pressing the left button[ ]or right button[ ], convert shooting numbers and delay
time settings.
Gently press button[ ]once to set numerical increased, hold it on, set the value rapidly
increased; Press the button[ ]once to set the numerical reduced, hold on to set the
values rapidly reduced.
The delay shooting function of TC-252 can user-defined the delay time and shots.
Shooting control Shooting control
3. By pressing button[ ]or[ ],enter into the setting for minutes and hours ,
“exposure time”, “interval time”,“shots number” as the sketch map.
“ ” “ ”
1 7
1 6
Operate the delay shooting
1. Press the left button[ ]or right button[ ], move the
activity icon to the delay shooting icon[ ].
2. Half-press the release button, the green light lit, and
the camera is in the focusing state until the release or full-
press the button.
3. Full-press the release button, timer remote control
start to delay countdown, red indicator blink quickly and
enter to the delay shooting mode.
4. When countdown is completed, timer remote control
will follow the setting shots output a signal per second to
control shooting.
When running the delay shooting, press the launch button again, the delay shooting
will stop.
Make sure to set the camera function to be [ ].
When the camera function is set to be [ ], it will start continuous shooting.
When the camera function is set to be [ ],the camera will shoot based on [ ] function,
it may cause underexposure or overexposure.
When the camera function is set to be [ ], the camera will perform one or more delay
shooting.
When the camera lens focus function is set to be [ M ],the camera will not execute focusing
action if half-press the release button of the timer remote control.
When the camera lens focus function is set to be [ A ], even receiving the shooting signal
the camera will not shoot at the moment when most of camera don't seize focus.
Timing plan for shooting
Delay time setting
1. In the power-on state, move the functional activities
icon to the delay timing program icon[ ]by pressing the
left move button[ ]or right move button[ ].
2. Press the set button, enter the delay time for ‘second
bit’ setting.
Shooting control Shooting control
1 9
1 8
Press
Press
Press
Press
Press
Press
Press
Press
Gently press button[ ]once to set numerical increased, hold it on, set the value rapidly
increased; Press the button[ ]once to set the numerical reduced, hold on to set the
values rapidly reduced.
4. Press the set button, save and exit settings.
Exposure time setting
1. Press left move button[ ]or right move button[ ],
move timer remote control’s activities icon to the exposure
timing program icon[ ].
2. Press the set button, enter the time for
“second bit” setting.
exposure
3. By pressing button[ ]or[ ],enter into the setting for minutes and hours ,“ ” “ ”
“ ” “ ” “ ”delay time , interval time , shots number as the sketch map.
Press
Press
Press
Press
Press
Press
Press
Press
Gently press button[ ]once to set numerical increased, hold it on, set the value rapidly
increased; Press the button[ ]once to set the numerical reduced, hold on to set the
values rapidly reduced.
4. Press the set button, save and exit settings.
Interval time setting
1. Press left move button[ ]or right move button[ ],
move timer remote control’s activities icon to the interval
timing program icon[ ].
2. Press the set button, enter the time for second
bit” setting.
interval “
The
shot
number
of
timing
plan
setting
Exposu
-re
time
of
timing
plan
setting
Delay time of timing
plan--hours setting
Delay time of timing
plan--minutes setting
Delay time of timing
plan--seconds setting
Exposure time of timing
plan--hours setting
Exposure
plan--minutes setting
time of timing Exposure
plan--seconds setting
time of timing
Delay
time
of
timing
plan
setting
Interval
time
of
timing
plan
setting
Shooting control Shooting control
2 1
2 0
The shot number setting
3. By pressing button[ ]or[ ],enter into the setting for delay time and
“exposure time”, “interval time” as the shown picture.
“ ”
Press
Press
Press
Press
Press
Press
Press
Press
Gently press button[ ]once to set numerical increased, hold it on, set the value rapidly
increased; Press the button[ ]once to set the numerical reduced, hold on to set the
values rapidly reduced.
4. Press the set button, save and exit settings.
1. Press left move button[ ]or right move button[ ],
move timer remote control’s activities icon to the icon of
timing shots [ ].
2. Press the set button, entering to set the number plan to shot.
[ ]setting shot number can be increased, press button [ ], settings shot
number can be decreased. It can be set between 1 to 99 sheets.
Press button
3. By pressing button[ ]or[ ],enter into the setting for minutes and hours ,
“delay time”, “exposure time”,“shots number” as the sketch map.
“ ” “ ”
Press
Press
Press
Press
4. Press the set button, save and exit settings.
Search the timing plan
1. Press left move button[ ]or right move button[ ],move timer remote
control’s activities icon to the timing plan icon which can check the related
timing project.
2. When check the related projects, if need adjust the parameters, only press
the set button to enter the relevant project settings, press the set button again
to exit and save your setting. Sequence to move the icons showed as below.
Interval time of timing
plan--hours setting
Interval
plan--minutes setting
time of timing Interval
plan--second setting
time of timing
Exposu
-re
time
of
timing
plan
setting
The
shot
number
of
timing
plan
setting
Interval
time
of
timing
plan
setting
Delay
time
of
timing
plan
setting
Shooting control Shooting control
2 3
2 2
Execute timing plan
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
1. Press the left move button[ ]or right move button[ ], move to any icon
among the timing plan shooting area.
2. Press the timing start/stop button[ ], the timer remote
control will execute timing plan, indicator flash red once
and task start executing.
Press the timing plan start/stop button[ ] of timer remote control
before the timing plan executing completely, the timer remote
control will stop regularly scheduled executing.
When executing the timing plan shooting, it can take single shot
by pressing the release button and would not influence the timing
plan.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
The following examples illustrate the timing plan running: delay time[ ] = 5
seconds, exposure time[ ] = 1 second, shooting interval[ ]= 6 seconds,
shooting number[ ] = 3.
Delay
shoot
-ing
function
Singl e
shoot
-ing
func tion
Focusing output Shooting output
Shooting control Shooting control
2 4
PIXEL TC-252 Specifications
Standby time: More than 3 years
Using battery: 1.5V×2AAA
Dimensions(W×H×D):149mm×49.5mm×24mm
Weight(with batteries):70.5g
Now you can start to use unique high-performance PIXEL
product TC-252. If you have any questions, you can contact the
local distributor. Or visit the website http://www.pixelhk.com.
… 12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pixel TC-252 Timer remote control bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pixel TC-252 Timer remote control in de taal/talen: Engels als bijlage per email.

De handleiding is 1,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info