491973
28
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
28
En
List of WLAN SETTING items
When [MODE] at [WLAN SETTING] is set to [OFF], only [MODE] and [RESET TO DEFAULT] are displayed.
Setting item 1 Setting item 2 Setting ranges Description
MODE
OFF/ACCESS POINT(AP)*/
WLAN CLIENT
Used to set this unit’s operation mode.
INPUT WPS PINCODE
1
0 to 9 (max. 8 characters)
When in the access point mode, input the PIN code of the sub unit
to be connected to this unit here to authorize connection.
NETWORK SETTING
1
SSID
A to Z, a to z, 0 to 9, symbols
(max. 32 characters)
Used to set this unit’s [SSID].
SECURITY
OPEN / WPA / WPA2 Used to set this unit’s security (encryption) type.
PASSWORD
A to Z, a to z, 0 to 9, symbols
(max. 64 characters)
Used to set this unit’s password.
OTHERS
1
IP ADDRESS
Sets this unit’s IP address.
SUBNET MASK
Sets this unit’s subnet mask.
CHANNEL NO.
CH1 to AUTO*
This unit uses the 2.4 GHz band. If there is a wireless LAN network
on the same band in the area and the waves cause interference,
making connections and communications instable, try changing
the channel manually. (By default, this is set to [AUTO] and a
relatively free channel is selected automatically.)
DHCP SERVER
ENABLE*/DISABLE
Used to set whether or not to enable this unit’s DHCP server
function.
[ENABLE]: Enables the DHCP server function.
[DISABLE]: Disables the DHCP server function.
CHANNEL WIDTH
20 MHz*/40 MHz
Used to set the frequency band’s width.
Only set [40 MHz] when communications are possible by
IEEE802.11n. Otherwise leave this at [20 MHz].
KEY RENEWAL INTERVAL
0minute to 60minute* to
1440minute
When [WPA] or [WPA2] is set at [SECURITY] under [NETWORK
SETTING], the encryption key’s renewal interval can be set.
When this setting is made, the encryption key is renewed automati-
cally at specific intervals, maintaining a more secure status.
RESET TO DEFAULT
YES/NO* Resets the settings at [WLAN SETTING] to the factory defaults.
SELECT SSID
2
Method of selection + input
method
A maximum of 50 receivable networks (SSIDs) in the surrounding
area are displayed. Use [OTHER] at the very bottom to specify an
[SSID] that is not displayed.
DHCP CLIENT
2
ENABLE*/DISABLE
Used to select whether to acquire the network settings automati-
cally using the DHCP function on the connected network side or to
set them manually.
[ENABLE]: Acquire the IP address, subnet mask, etc., automatically.
[DISABLE]: Input the IP address, subnet mask, etc., manually.
IP ADDRESS/SUBNET MASK
000:000:000:000 to
255:255:255:255
(Set to 192:168:1:1/255:255:255:0
upon purchase.)
When in the access point mode, the fixed values below are set.
IP address: 192.168.1.1
Subnet mask: 255.255.255.0
When [DHCP CLIENT] is set to [DISABLE], the values must be input
manually.
*: Setting upon purchase
1 Not displayed in the WLAN client mode.
2 Items marked “**” are not displayed in the access point (AP) mode.
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer XDJ-AERO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer XDJ-AERO in de taal/talen: Engels als bijlage per email.

De handleiding is 1,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Pioneer XDJ-AERO

Pioneer XDJ-AERO Gebruiksaanwijzing - Nederlands - 38 pagina's

Pioneer XDJ-AERO Gebruiksaanwijzing - Deutsch - 39 pagina's

Pioneer XDJ-AERO Gebruiksaanwijzing - Français - 39 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info