491973
23
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
23
En
Basic Operation
Using this unit’s rotary selector to load
tracks from a mobile device or computer
via wireless LAN
1 Connect the mobile device or computer to this unit
via wireless LAN.
2 Launch rekordbox on the mobile device or computer
and establish the link.
For rekordbox (Mac/Windows) on the computer, click at the bot-
tom left of the screen.
The XDJ-AERO icon is displayed on the screen and tracks can be loaded
from rekordbox (Mac/Windows) to this unit.
3 Press this unit’s [ rekordbox] button.
The mobile devices or computers connected to this unit are displayed on
the main unit display.
4 Turn this unit’s rotary selector to select the mobile
device or computer, then press the rotary selector.
Use this unit’s rotary selector to select the mobile device or computer to
be operated.
5 Turn this unit’s rotary selector to select the track from
the track collection in rekordbox on the mobile device or
computer.
! To move to lower layers in a folder, select the folder then press the
rotary selector.
! To return to a higher level, press the [BACK (TOP)] button.
! When the [BACK (TOP)] button is pressed for over 1 second, the
screen returns to the topmost layer (only when using a mobile
device).
6 Press this unit’s rotary selector.
Track loading starts. The jog dial indicator on the deck on which the
track is being loaded flashes.
Once playback is possible, the jog dial indicator stops flashing, remain-
ing lit, the track name is displayed on the main unit display and playback
starts (by factory default).
Loading tracks from USB devices
1 Connect the USB device to the USB device insertion slot.
2 Press the [
USB] button.
The tracks on the USB device are displayed on the main unit display.
3 Turn the rotary selector.
Select the track.
! To move to lower layers in a folder, select the folder then press the
rotary selector.
! To return to a higher level, press the [BACK (TOP)] button.
! When the [BACK (TOP)] button is pressed for over 1 second, the
screen moves back to the layer above.
4 Press the rotary selector.
The track is loaded and playback begins.
When recorded on a USB device, some time may be required for loading
the track, depending on the USB device.
Disconnecting USB devices
Always perform the following procedure to disconnect USB devices.
Pulling the USB device out without performing this procedure could
make the USB device unreadable.
When turning this unit’s power off, be sure to remove the USB device
first.
1 Press the [USB STOP] button for over 2 seconds.
The USB indicator turns off.
2 Disconnect the USB device.
Outputting sound
Before outputting sound, check that this unit and the surrounding
devices are properly connected. For instructions on connecting, see
Connecting the input/output terminals on page 10 or Connecting by wire-
less LAN on page 11.
Set the volume of the power amplifiers connected to the [MASTER OUT
1] and [MASTER OUT 2] terminals to an appropriate level. Note that very
loud sounds will be output if the volume is set too high.
When playing tracks via wireless LAN, playback may become impos-
sible due to deterioration of the communication conditions. In this
case, loop playback begins automatically and [EMERGENCY LOOP] is
displayed on the main unit display.
When communications conditions recover, the [EMERGENCY LOOP]
display turns off. Press the [AUTO BEAT LOOP] control at this time to
cancel looping.
To output the sound of channel 1 [CH 1]
To output the sound of [CH 2] (channel 2), replace [CH 1] with [CH 2],
[DECK1] with [DECK2] and [PHONO1/LINE1] with [PHONO2/LINE2] in
the procedure below.
1 Switch the [DECK1, PHONO1/LINE1] selector switch in
the [CH 1] section.
Select the input source for [CH 1] from among the devices connected to
this unit.
[DECK1]: Selects the USB device or the unit connected by wire-
less LAN.
[PHONO1/LINE1]: Selects the device connected to the
[PHONO1/LINE1] terminals.
2 Press the [MASTER] button at the center of this unit.
Set so that the [MASTER] button is off.
! When the [MASTER] button is off, the audio level input to [CH 1] and
[CH 2] is displayed on the [LEVEL] indicator.
3 Turn the [CH 1] [TRIM] control clockwise.
Adjusts the audio level input to the [CH 1] terminal.
The [LEVEL] indicator lights when sound is properly being input to
[CH 1].
Adjust the [TRIM] control so that the orange indicator lights where the
track’s volume is highest (at the climax, etc.)
Be careful that the red indicator does not light, or the sound could be
distorted.
4 Move the [CH 1] channel fader to the back side.
The level of the sound output from the [CH 1] terminals is adjusted.
5 Switch [CROSS F. CURVE THRU, , ] (the crossfader
curve selector switch).
This switches the crossfader curve characteristics.
[THRU]: Choose this when you do not want to use the crossfader.
[ ]: Set here for a curve that rises gradually.
[ ]: Set here for a curve that rises steeply. (When the crossfader
moves away from either the left or right edge, the sound is imme-
diately output from the opposite side.)
6 Set the crossfader.
Switch the channel whose sound is output from the speakers.
Left edge: The [CH 1] sound is output.
Center position: The sound of [CH 1] and [CH 2] is mixed and
output.
Right edge: The [CH 2] sound is output.
! This operation is not necessary when the [CROSS F. CURVE (THRU,
, )] selector switch is set to [THRU].
7 Press the [MASTER] button at the center of this unit.
Set so that the [MASTER] button is lit.
! When the [MASTER] button is lit, the audio level output from the
[MASTER OUT 1] and [MASTER OUT 2] terminals is displayed on
the [LEVEL] indicator.
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer XDJ-AERO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer XDJ-AERO in de taal/talen: Engels als bijlage per email.

De handleiding is 1,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Pioneer XDJ-AERO

Pioneer XDJ-AERO Gebruiksaanwijzing - Nederlands - 38 pagina's

Pioneer XDJ-AERO Gebruiksaanwijzing - Deutsch - 39 pagina's

Pioneer XDJ-AERO Gebruiksaanwijzing - Français - 39 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info