491889
26
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
Listening to your system
05
26
En
05
a. BASS settings cannot be adjusted when the front speaker is
set to SMALL in the Speaker Setting (or is set automatically via
the Auto MCACC setup) and the X.OVER is set above 150 Hz.
In this case, adjusting the subwoofer channel levels via CH
LEV allows for similar adjustments to those that could
otherwise be performed via BASS (page 29).
b. • Channels are displayed as follows.
FL – Front left
FHL – Front height left
C – Center
FHR – Front height right
FR – Front right
SR – Surround right
SBR – Surround back right
SBL – Surround back left
SL – Surround left
SW – Subwoofer
• Speakers for which Speaker Settings are set to NO cannot
be selected.
c. With a 7.1-channel surround system, audio signals that have
undergone matrix decoding processing through surround
back channel processing to which the Up Mix function is
added are output from the surround back speakers.
d. • Phase matching is a very important factor in achieving
proper sound reproduction. If two waveforms are ‘in phase’,
they crest and trough together, resulting in increased
amplitude, clarity and presence of the sound signal. If a crest
of a wave meets a trough, then the sound will be ‘out of phase’
and an unreliable sound image will be produced.
• If your subwoofer has a phase control switch, set it to the
plus (+) sign (or 0°). However, the effect you can actually feel
when Phase Control is set to ON on this receiver depends on
the type of your subwoofer. Set your subwoofer to maximize
the effect. It is also recommended you try changing the
orientation or the place of your subwoofer.
• Set the built-in lowpass filter switch of your subwoofer to
OFF. If this cannot be done on your subwoofer, set the cutoff
frequency to a higher value.
• If the speaker distance is not properly set, you may not have
a maximized Phase Control effect.
• The Phase Control mode cannot be set to ON in the
following cases:
– When the PURE DIR mode is switched on.
– When the headphones are connected.
e. You can change the Sound Retriever feature at any time by
using
S.RTRV
button.
f. The default setting when the ADAPTER input is selected is
ON.
g. This setting works only with dual mono encoded Dolby Digital
and DTS soundtracks.
h. The initial set AUTO is only available for Dolby TrueHD signals.
Select MAX or MID for signals other than Dolby TrueHD.
i. You shouldn’t have any problems using this with most SACD
discs, but if the sound distorts, it is best to switch the gain
setting back to 0 dB.
j. This feature is only available when the connected display
supports the automatic audio/video synchronizing capability
(‘lip-sync’) for HDMI. If you find the automatically set delay
time unsuitable, set AUTO DELAY to OFF and adjust the delay
time manually. For more details about the lip-sync feature of
your display, contact the manufacturer directly.
k. Only available with 2-channel sources in 2PLII MUSIC mode.
l. Only when listening to 2-channel sources in NEO:6 CINEMA
and NEO:6 MUSIC mode.
CENTER WIDTH
k
(Applicable only when using a center speaker)
Spreads the center channel between the front
right and left speakers, making it sound wider
(higher settings) or narrower (lower settings).
0 to 7
Default: 3
DIMENSION
k
Adjusts the surround sound balance from
front to back, making the sound more distant
(minus settings), or more forward (positive
settings).
–3 to +3
Default: 0
PANORAMA
k
Extends the front stereo image to include
surround speakers for a ‘wraparound’ effect.
OFF
ON
CENTER IMAGE
l
(Applicable only when using a center speaker)
Adjust the center image to create a wider
stereo effect with vocals. Adjust the effect
from 0 (all center channel sent to front right
and left speakers) to 10 (center channel sent
to the center speaker only).
0 to 10
Default: 3
(NEO:6 MUSIC),
10 (NEO:6
CINEMA)
HEIGHT GAIN
Adjusts the output from the front height
speaker when listening in 2PLIIz HEIGHT
mode. If set to HIGH, the sound from the top
will be more emphasized.
HIGH
MID
LOW
Setting/What it does Option(s)
VSX-S300_SYXCN_En.book 26 ページ 2011年4月8日 金曜日 午後8時10分
26

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Pioneer-VSX-S300-S

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer VSX-S300-S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer VSX-S300-S in de taal/talen: Engels als bijlage per email.

De handleiding is 2,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Pioneer VSX-S300-S

Pioneer VSX-S300-S Snelstart handleiding - Nederlands - 32 pagina's

Pioneer VSX-S300-S Gebruiksaanwijzing - Nederlands - 36 pagina's

Pioneer VSX-S300-S Snelstart handleiding - Deutsch - 32 pagina's

Pioneer VSX-S300-S Gebruiksaanwijzing - Deutsch - 36 pagina's

Pioneer VSX-S300-S Snelstart handleiding - English, Français, Italiano, Espanõl - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info