574069
29
Verklein
Vergroot
Pagina terug
1/120
Pagina verder
Using i.LINK Interface
29
En
PREPARATION
Memo:
When properly connected, the i.LINK plug will snap
into the connector. If not connected properly the
receiver will not be able to recognize any connected
components.
After connecting an i.LINK-equipped component to
the receiver, follow the instructions for both assigning
inputs on the receiver (see page 91) and output
settings on the component (see the manual that
came with the component).
You can connect several i.LINK-equipped components
together in the same way. See Creating an i.LINK
Network below.
There may be cases where the PQLS/ rate control
function and/or the i.LINK audio does not work
properly even when connected to an i.LINK-Audio-
compatible equipment.
Do not connect/disconnect i.LINK cables or switch
on/off any components connected using i.LINK while
the receiver is on.
Creating an i.LINK Network
Using the i.LINK interface it is possible to chain up to 17 components together so that the digital audio and
control signals from each component is available to other components in the network. With the addition of an
i.LINK repeater, it’s possible to connect up to 63 components.
i.LINK connectors come in 4-pin and 6-pin configurations. This receiver uses a 4-pin connection, but the two
types can be mixed on a network.
This receiver is compatible with i.LINK Audio (also called “A & M Protocol”) components, such as DVD
players. It may not work properly if connected to i.LINK MPEG-II TS equipment (such as a digital satellite
tuner), i.LINK DV equipment (such as a DVD recorder or DV camcorder), or an i.LINK-equipped personal
computer. Check the operating instructions supplied with your other i.LINK components for capability
information.
Receivers need to be DTCP (Digital Transmission Content Protection) compliant to be able to play DVD-A,
DVD-Video, and SACD i.LINK audio. This receiver is DTCP compliant, so you can use them.
When setting up an i.LINK network, it’s important that the components form an open ended chain (fig. 1), or
a tree (fig. 2).
The system will not work if the connected components form a loop. If a loop is detected, the message LOOP
CONNECT shows in the display. Figs. 3 and 4 show connections that form a loop.
Another consideration when connecting i.LINK devices is the speed of the interface. At present there are
three speeds; S100 (slowest), S200 and S400 (fastest). This receiver uses the S400 type. Although you can use
components with different speeds together, we recommend connecting slower-speed components at the
edge of the network if possible (shown by the shaded boxes in figs. 1 and 2). This will keep the network free of
bottlenecks.
When used within an i.LINK network, this receiver must be on for the i.LINK connection to be maintained.
Other components in the network may or may not maintain the connection in standby (none will when the
power is completely off)—check the operating instructions supplied with individual components. Note that
the audio may be momentarily interrupted if a component in the i.LINK network is switched on/off, or its
i.LINK connection is switched on/off.
i.LINK connectors
Use a 4-pin, S400 i.LINK cable, less than 3.5 m long,
to connect i.LINK-equipped components.
Be sure to insert the
i.LINK cable straight
into connector. When
properly aligned the
cable can be inserted
with little resistance.
Forcing the cable into
the connector will
damage the connector
pins.
VSX-AX5i.book Page 29 Friday, May 23, 2003 6:33 PM
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer VSX-AX5i-S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer VSX-AX5i-S in de taal/talen: Engels als bijlage per email.

De handleiding is 12,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Pioneer VSX-AX5i-S

Pioneer VSX-AX5i-S Gebruiksaanwijzing - Nederlands - 116 pagina's

Pioneer VSX-AX5i-S Gebruiksaanwijzing - Deutsch - 116 pagina's

Pioneer VSX-AX5i-S Gebruiksaanwijzing - Français - 116 pagina's

Pioneer VSX-AX5i-S Gebruiksaanwijzing - Italiano - 116 pagina's

Pioneer VSX-AX5i-S Gebruiksaanwijzing - Espanõl - 120 pagina's

Pioneer VSX-AX5i-S Gebruiksaanwijzing - Türkiye - 116 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info