586463
57
Verklein
Vergroot
Pagina terug
1/142
Pagina verder
57
Basic Setup
05
Parental Lock
Set restrictions for using Internet services. Also set the password accompanying the usage restrictions.
! Upon shipment from the factory, the password is set to “0000”.
Important
When the INTERNET RADIO, PANDORA, Spotify or FAVORITES input is selected, the setting made here cannot
be reflected.
1 Select ‘Parental Lock’ from the Network Option menu.
2 Input the password.
Use i/j to select a character, k/l to set the position, and ENTER to confirm your selection.
3 Specify whether to turn Parental Lock on or off.
! OFF – Internet services are not restricted.
! ON – Internet services are restricted.
4 If you want to change the password, select Change Password.
In this case, the procedure returns to step 2.
Play ZONE Setup
Excluding VSX-830
You can select what zone to play when playing via AirPlay and Bluetooth equipped devices as well as when play-
ing audio content on equipment in the home network in DMR mode.
! For playable DLNA-compatible network devices, see page 76 .
1 Select ‘Play ZONE Setup’ from the Network Option menu.
2 Select the zone in which you want to play the audio contents.
3 When you’re finished, press RETURN.
You will return to the Network Option menu.
Notes
! If another zone is on, it may not be possible to play the audio contents. In this case, turn the other zone off,
then play the audio contents.
! MAIN/HDZONE at ZONE Setup must be set to HDZONE in order to use the HDZONE function (page 111 ).
Automatically conducting optimum sound tuning (Full Auto MCACC)
The Full Auto MCACC Setup measures the acoustic characteristics of your listening area, taking into account
ambient noise, speaker connection and speaker size, and tests for both channel delay and channel level. When
Measurement Type is Expert, in addition to this, Standing Wave, Reverb characteristics, Full Band Phase
Control (excluding VSX-830) and EQ are measured. After you have set up the microphone provided with your
system, the receiver uses the information from a series of test tones to optimize the speaker settings and equal-
ization for your particular room.
Important
! Make sure the microphone and speakers are not moved during the Full Auto MCACC Setup.
! Using the Full Auto MCACC Setup will overwrite any existing settings for the MCACC preset you select.
! Before using the Full Auto MCACC Setup, the headphones should be disconnected.
! With factory default settings, the on-screen display will be output from all HDMI output terminals and dis-
played on any TV connected via HDMI cable.
Excluding VSX-830: You can change where the screen is output in the MAIN/HDZONE (page 111 ) and HDMI
output (page 88 ) settings.
CAUTION
! The test tones used in the Full Auto MCACC Setup are output at high volume.
1 Press u STANDBY/ON to switch on the receiver and your TV.
Make sure that the TV’s video input is set to this receiver.
2 Connect the microphone to the MCACC SETUP MIC jack on the front panel.
Microphone
Tripod
Make sure there are no obstacles between the speakers and the microphone.
If you have a tripod, use it to place the microphone so that it’s about ear level at your normal listening position. If
you do not have a tripod, use some other object to install the microphone.
Install the microphone on a stable floor. Placing the microphone on any of the following surfaces may make
accurate measurement impossible:
! Sofas or other soft surfaces.
! High places such as tabletops and sofa tops.
The Full Auto MCACC display appears once the microphone is connected.
Speaker System : 7.2ch/5.2.2ch
Exit
2a.Full Auto MCACC
Return
START
EQ Type : SYMMETRY
SP to ceiling : – – –
MCACC : M1.MEMORY 1
Dolby Enabled Speaker
: NO
Measurement Type : Expert
! If you leave the GUI screen for over five minutes, the screen saver will appear.
3 Press MAIN RECEIVER to switch the remote control to the receiver operation mode.
4 Select the parameters you want to set.
When the speaker system is not 7.2ch/5.2.2ch (VSX-1130/VSX-930)/5.2ch (VSX-830), set Speaker System before
measuring full auto MCACC. For details, see Speaker system setting on page 106 .
! Speaker System – Shows the current settings. When this is selected and ENTER is pressed, the speaker
system selection screen appears. Select the proper speaker system, then press RETURN to return.
If you are planning on bi-amping your front speakers, or setting up a separate speaker system in another
room, read through Speaker system setting on page 106 and make sure to connect your speakers as neces-
sary before continuing to step 4.
 
57

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Pioneer-VSX-930-K-S

Zoeken resetten

  • Hallo
    Is er ook een fabrieksinstelling voor de vsx930 Gesteld op 15-1-2019 om 18:45

    Reageer op deze vraag Misbruik melden
  • Ik heb een Pioneer vsx930 maar heb sinds kort een nieuw ziggo kasje en als ik hem aan zet moet ik mijn IP adres in vullen maar die pakt hij dan niet dan moet ik hem resetten en dan weer mijn IP adres in vullen met oude kasje van ziggo had ik dat niet was gewoon eenmalig.
    Ik hoop dat me iemand kan helpen ik ben radeloos. Groete Ray Gesteld op 8-5-2017 om 21:49

    Reageer op deze vraag Misbruik melden
  • Ik heb me verleden week pioneer reciever 930 gekocht heb alles in gesteld bedieni op mijn iPad maar ineens is mijn verbinding weg met mijn iPad met geen mogelijkheid om weer verbinding te maken met elkaar geef steeds op nieuw mijn ip adres in maar helaas geen verbinding meer te krijgen terwijl er van te voren wel verbinding was met elkaar ik kom er niet uit.. Groetjes Ray mijn imail adres is sanray@ziggo.nl bedankt alvast Gesteld op 18-7-2016 om 20:07

    Reageer op deze vraag Misbruik melden
    • Hi Ray, ik heb met mijn 930 precies dezelfde ervaring.
      Ik denk dat de app op mijn iPad niet meer werkt want als je kijkt voor welke toestellen deze app [iControlAV5] geschikt is, staat de 930 niet meer vermeld. Geantwoord op 19-3-2017 om 17:32

      Waardeer dit antwoord (1) Misbruik melden
    • Onder tussen doet hij het prima maar ik moet wel steeds de geluidi instellingen op nu moet instellen als hij uit is geweest dat is wel raar. Groete Ray Geantwoord op 19-3-2017 om 17:53

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer VSX-930 K-S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer VSX-930 K-S in de taal/talen: Engels als bijlage per email.

De handleiding is 20,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Pioneer VSX-930 K-S

Pioneer VSX-930 K-S Gebruiksaanwijzing - Nederlands - 146 pagina's

Pioneer VSX-930 K-S Gebruiksaanwijzing - Deutsch - 146 pagina's

Pioneer VSX-930 K-S Gebruiksaanwijzing - Français - 145 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info