Handleiding Pioneer VSX-922S (pagina 73 van 109) (Engels)

491804

Verklein

Vergroot

Pagina terug

1/109

Pagina verder

The Advanced MCACC menu

Manual MCACC setup

You can use the settings in the Manual MCACC setup menu to make detailed adjustments when you’re more

familiar with the system. Before making these settings, you should have already completed Automatically con-

ducting optimum sound tuning (Full Auto MCACC) on page 32.

You only need to make these settings once (unless you change the placement of your current speaker system or

add new speakers).

CAUTION

! The test tones used in the Manual MCACC setup are output at high volume.

Important

! Press the MCACC button while the pertinent setup screens are displayed to select MCACC presets.

! For some of the settings below, you’ll have to connect the setup microphone to the front panel and place it

about ear level at your normal listening position. Press HOME MENU to display the Home Menu before you

connect the microphone to this receiver.

! See Problems when using the Auto MCACC Setup on page 33 for notes regarding high background noise

levels and other possible interference.

! If you’re using a subwoofer, switch it on and turn up the volume to the middle position.

1 Select ‘Manual MCACC’ from the Advanced MCACC menu.

See Making receiver settings from the Advanced MCACC menu on page 71 if you’re not already at this screen.

2 Select the setting you want to adjust.

If you’re doing this for the first time, you might want to make these settings in order.

! Fine Channel Level – Make fine adjustments to the overall balance of your speaker system (see Fine Channel

Level on page 73).

! Fine SP Distance – Make precise delay settings for your speaker system (see Fine Speaker Distance on page

73).

! Standing Wave – Control overly resonant low frequencies in your listening room (see Standing Wave on

page 74).

The last two settings are specifically for customizing the parameters explained in Acoustic Calibration EQ Adjust

on page 74:

! EQ Adjust – Manually adjust the frequency balance of your speaker system while listening to test tones (see

Acoustic Calibration EQ Adjust on page 74).

! EQ Professional – Calibrate your system based on the direct sound coming from the speakers and make

detailed settings according to your room’s reverb characteristics (see Acoustic Calibration EQ Professional

on page 74).

Fine Channel Level

! Default setting: 0.0dB (all channels)

You can achieve better surround sound by properly adjusting the overall balance of your speaker system. You can

adjust the Channel Level of each speaker in 0.5 dB increments. The following setting can help you make detailed

adjustments that you may not achieve using the Manual speaker setup on page 79.

1 Select ‘Fine Channel Level’ from the Manual MCACC setup menu.

The volume increases to the 0.0 dB reference level.

2 Adjust the level of the left channel.

This will be the reference speaker level, so you may want to keep the level around 0.0dB so that you’ll have plenty

of room to adjust the other speaker levels.

! After pressing ENTER, test tones will be output.

3 Select each channel in turn and adjust the levels (+/–12.0 dB) as necessary.

Use k/l to adjust the volume of the speaker you selected to match the reference speaker. When it sounds like

both tones are the same volume, press j to confirm and continue to the next channel.

! For comparison purposes, the reference speaker will change depending on which speaker you select.

! If you want to go back and adjust a channel, simply use i/j to select it.

4 When you’re finished, press RETURN.

You will return to the Manual MCACC setup menu.

Fine Speaker Distance

! Default setting: 3.00m (all speakers)

For proper sound depth and separation with your system, it is necessary to add a slight bit of delay to some

speakers so that all sounds will arrive at the listening position at the same time. You can adjust the distance of

each speaker in 1 cm increments. The following setting can help you make detailed adjustments that you may not

achieve using the Manual speaker setup on page 79.

1 Select ‘Fine SP Distance’ from the Manual MCACC setup menu.

2 Adjust the distance of the left channel from the listening position.

3 Select each channel in turn and adjust the distance as necessary.

Use k/l to adjust the delay of the speaker you selected to match the reference speaker.

Listen to the reference speaker and use it to measure the target channel. From the listening position, face the two

speakers with your arms outstretched pointing at each speaker. Try to make the two tones sound as if they are

arriving simultaneously at a position slightly in front of you and between your arm span.

! If you can’t seem to achieve this by adjusting the distance setting, you may need to change the angle of your

speakers very slightly.

! The subwoofer’s test tone differs in tone from other channels. Adjust so that the sound of the subwoofer can

be heard distinctly. Note that when adjusting the subwoofer, depending on the low frequency response of

your speaker, it may be difficult to hear the change even when the setting is increased or decreased or when

the position of the speaker is changed. Note that it may be difficult to compare this tone with the other speak-

ers in your setup (depending on the low frequency response of the reference speaker).

When it sounds like the delay settings are matched up, press j to confirm and continue to the next channel.

! For comparison purposes, the reference speaker will change depending on which speaker you select.

! If you want to go back and adjust a channel, simply use i/j to select it.

4 When you’re finished, press RETURN.

You will return to the Manual MCACC setup menu.

Pioneer VSX-922S Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Pioneer VSX-922S

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info