574062
99
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
Additional information
11
99
En
USB interface
Miscellaneous
Note
If the unit does not operate normally due to external
effects such as static electricity, disconnect the
power plug from the outlet and insert again to return
to normal operating conditions.
NO SIGNAL A component is outputting an i.LINK signal that the amplifier cannot reproduce. This amplifier can only
reproduce signals from i.LINK-Audio-equipped components. See About i.LINK on page 79 for more on
this.
PQLS OFF This is displayed when PQLS turns off during playback. The sound may be interrupted momentarily when
this happens.
PQLS ON This is displayed when PQLS turns on during playback. The sound may be interrupted momentarily when
this happens.
UNKNOWN When an i.LINK-equipped component name cannot be recognized, this message is displayed instead of
the proper component name.
Message Explanation
Symptom Cause Remedy
No sound. • The computer settings are incorrect. • Make sure you have set up your computer system to
output through the USB interface (see Using the USB
interface on page 80).
• The software or source material you are
using is not compatible with USB output.
• Update to a more recent version of your existing
software, try a different audio program, or try a different
source.
• The volume control on your computer is set
too low.
• Turn up the volume on your computer.
No sound from one or more
channels.
• The software settings are incorrect, or the
program you are using cannot output
multichannel audio.
• Try changing the software settings. If this doesn’t work,
update to a more recent version of your existing software,
or try a different audio program.
• The wrong input setting is selected for the
USB interface.
• Change the setting accordingly (see Selecting USB and
multichannel analog input channels on page 45).
Symptom Cause Remedy
The amplifier doesn’t seem to
respond when the buttons are
pressed.
• Static electricity caused by dry air. • Switch the power off then on again. If this doesn’t seem
to work, try disconnecting the power plug from the outlet,
and insert again.
One of the Home THX 7.1
channel modes is selected, but
there are certain options that
can't be chosen.
• There is only one surround back speaker
connected or the current settings are for only
one surround back speaker.
• Make sure there are two surround back speakers
connected (see Connecting the speakers on page 24) and
make the necessary settings in Speaker Systems on
page 52.
There seems to be a time lag
between the speakers and the
output of the subwoofer.
• The subwoofer channel can be delayed
slightly if run through a low-pass filter.
• See Automatically setting up for surround sound on
page 35 to set up your system again using MCACC (this
will automatically compensate for a delay in the
subwoofer output).
The amplifier doesn’t memorize
the last volume level you used
before switching it off.
• The amplifier was switched off immediately
after changing the volume level.
• Make sure to switch off the amplifier two seconds or
more after changing the volume.
The amplifier doesn’t memorize
the last adjustments you made
before switching it off.
• The amplifier was switched off immediately
after changing the amplifier status.
• Make sure to switch off the amplifier two seconds or
more after changing the amplifier status.
99

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Pioneer-VSA-AX10i-S

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer VSA-AX10i-S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer VSA-AX10i-S in de taal/talen: Engels als bijlage per email.

De handleiding is 3,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Pioneer VSA-AX10i-S

Pioneer VSA-AX10i-S Gebruiksaanwijzing - Nederlands - 104 pagina's

Pioneer VSA-AX10i-S Gebruiksaanwijzing - Deutsch - 104 pagina's

Pioneer VSA-AX10i-S Gebruiksaanwijzing - English - 25 pagina's

Pioneer VSA-AX10i-S Gebruiksaanwijzing - Français - 104 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info