You do not know how to initialize. ■
Cause Solution
- Tap [System]-[Setting Manager]-[Initialize] from the home
screen to initialize. Refer to the User’s Guide for details. If
you initialize, the ride log data will be deleted. Save the data
to a PC before initialization.
Sensor information is not displayed. ■
Cause Solution
The sensor is not paired. Check that the sensor is paired to the device properly. If you
use the pedaling monitor sensor SGY-PM900, refer to the
User’s Manual of the SGY-PM900 and Installation Manual.
The sensor battery is almost empty. Replace the battery with a new one. Refer to the user’s
manual of the sensor about how to replace the battery.
The latitude and longitude are not displayed. ■
Cause Solution
Reception is poor when inside a
room or in areas surrounded by
mountains.
It may take a few minutes to display
the latitude and longitude when you
use the device the rst time.
Use the device outside in an open area.
When you use the device for the rst time, you may need to
allow extra time.
