699655
197
Verklein
Vergroot
Pagina terug
1/223
Pagina verder
197
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
analog or DSD.
Audio Return Channel: You can enjoy the sound of the HDMI-connected ARC-
compatible TV through the speakers connected to the unit. Select "On" when
listening to the audio of TV using the speakers of this unit. Select "Off" when the
ARC function is not used.
Audio
Sound Retriever: Improve the quality of the compressed audio. Playback sound
of lossy compressed les such as MP3 will be improved. The setting can be
separately set to each input selector. The setting is effective in the signals of
48 kHz or less. The setting is not effective in the bitstream signals.
It cannot be set if the listening mode is Direct or Pure Direct.
Midnight: Make small sounds easily heard. It is useful when you need to reduce
the volume while watching a movie late night. You can enjoy the effect only when
playing Dolby series and DTS series input signals.
It cannot be set if the listening mode is Direct or Pure Direct.
The setting cannot be used in the following cases.
If "Loudness Management" is set to "Off" when playing Dolby Digital Plus or
Dolby TrueHD
When the input signal is DTS:X and "Dialog Control" is other than 0 dB
Stereo Assign: When the listening mode is set to "Stereo", the audio output
destination can be set to "Surround", "Surround Back", "Height 1" or "Height 2" in
addition to the normal right and left channels ("Front") of front speakers.
The setting cannot be used in the following cases.
When a listening mode other than “Stereo” is set
When using Speaker B
It is not possible to select speakers that are not set at "System Setup" -
"Speaker" - "Conguration" on the Home screen.
Zone B: Select a method of outputting audio to ZONE B from among "Off",
"On(A+B)" and "On(B)".
In the following cases, "Zone B" cannot be selected.
When ZONE 2 is On
When "System Setup" - "Speaker" - "Conguration" - "Zone 2 Preout" on
the Home screen is set to "Zone 2" (
p160)
Speakers: When Speaker B are used, you switch output between Speaker A/B/
A+B.
Note that sound is not output from the surround back speaker during Speaker
A+B output.
Auto Phase Control+: The low frequencies are recorded with a delay for some
discs not made according to phase control standards. This function corrects the
phase shift when playing such discs. When "Auto" is selected, in addition to the
low frequency delay, the polarity and correlation are also detected and corrected.
It cannot be set if the listening mode is Pure Direct.
Dialog Lifted Up : By adjusting the localization of the center elements, you can
make it easier to hear dialog in movies or give more prominence to the vocals in
music. If you are using front high speakers, you can select from "1" (low) to "4"
(high).
The function cannot be set in the following cases.
When the Front High speakers are not enabled
When the “Adjusting DIALOG” (
p130) function is being used
When “Dialog Control” ( p164) has been set
When the listening mode is Direct or Pure Direct
Audio Scaler : By selecting "Auto", "Hi-bit 32", "Upsampling", and "Digital Filter"
are each automatically set to the optimum values so that you get the high-quality
playback of music les and CDs. The setting can be separately set to each input
selector.
Select "Manual" if you want to manually adjust "Hi-bit 32", "Upsampling", and
"Digital Filter".
Hi-bit 32 : By expanding the dynamic range of digital audio signal sources such
as CDs, DVDs, and BDs, it is possible to achieve a smoother and more rened
sound. The setting can be separately set to each input selector. This can be set
when the sampling frequency is 44.1 kHz or more.
This cannot be set if "Auto" is selected for "Audio Scalar".
Upsampling : By increasing the sampling frequency of PCM 2 channel audio by
a factor of 2 or 4, you can achieve high-quality sound reproduction. The setting
can be separately set to each input selector. This can be set when the sampling
frequency is between 44.1 kHz and 96 kHz. This function works in the Direct,
Pure Direct, and Stereo listening modes.
This cannot be set if "Auto" is selected for "Audio Scalar".
197

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer SC-LX704 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer SC-LX704 in de taal/talen: Engels als bijlage per email.

De handleiding is 19,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Pioneer SC-LX704

Pioneer SC-LX704 Snelstart handleiding - Nederlands - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Nederlands - 223 pagina's

Pioneer SC-LX704 Snelstart handleiding - Deutsch - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Deutsch - 223 pagina's

Pioneer SC-LX704 Snelstart handleiding - English, Français - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Français - 223 pagina's

Pioneer SC-LX704 Snelstart handleiding - Italiano - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Italiano - 223 pagina's

Pioneer SC-LX704 Snelstart handleiding - Espanõl - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Espanõl - 223 pagina's

Pioneer SC-LX704 Snelstart handleiding - Svenska - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Svenska - 223 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info