699655
189
Verklein
Vergroot
Pagina terug
1/223
Pagina verder
189
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
Setting Item Default Value Setting Details
Subwoofer 2 0.0 dB After selecting the speaker frequency from between
"31 Hz" and "250 Hz" with the cursors
/ , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" (0.5dB intervals) with / . To
readjust the overall volume balance with "Trim",
select "Trim" in / , and use / to adjust the
volume.
If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
This cannot be selected if "No" or "1ch" is set in
"System Setup" - "Speaker" - "Conguration" -
"Subwoofer".
The result may not be as expected depending on the input source and listening mode
setting.
EQ Professional
You can automatically measure and calibrate the reverberation characteristics
(how the sound echoes) of the room. First measure the reverberations with
"Reverb Measurement", then check the results with "Reverb View". Specify the
calibrated time position in "Advanced EQ Setup" based on the measured results
to automatically calibrate the reverberation characteristics.
Reverb Measurement
Measure the reverberation characteristics of the room. After making the following
settings, place the speaker setup microphone in the listening position, and
connect to the SETUP MIC jack on the main unit. Press ENTER and follow the on
screen instructions.
Setting Item Default Value Setting Details
Reverb Measure without EQ Select the method for measuring the reverberation
characteristics.
"without EQ": MCACC is used to measure the
reverberation characteristics of the room without
any adjustments made to the equalizer of the
speakers.
"with EQ": Measures the reverberation
characteristics of the room using the adjustments to
the equalizer of the speakers saved in the MCACC
Memory.
Reverb View
The results of the measurements of the reverberation characteristics are shown
in graphs for each speaker and frequency. If there is no reverberation, the graph
stays horizontal, but if there is reverberation the graph rises to the right. If the
"Symmetry" calibration type has been selected and Full Auto MCACC was
performed, predicted values for the reverberation characteristics after calibration
are also shown.
189

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer SC-LX704 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer SC-LX704 in de taal/talen: Engels als bijlage per email.

De handleiding is 19,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Pioneer SC-LX704

Pioneer SC-LX704 Snelstart handleiding - Nederlands - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Nederlands - 223 pagina's

Pioneer SC-LX704 Snelstart handleiding - Deutsch - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Deutsch - 223 pagina's

Pioneer SC-LX704 Snelstart handleiding - English, Français - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Français - 223 pagina's

Pioneer SC-LX704 Snelstart handleiding - Italiano - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Italiano - 223 pagina's

Pioneer SC-LX704 Snelstart handleiding - Espanõl - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Espanõl - 223 pagina's

Pioneer SC-LX704 Snelstart handleiding - Svenska - 2 pagina's

Pioneer SC-LX704 Gebruiksaanwijzing - Svenska - 223 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info